1. Product Features and Benefits

2. Super Blue Ribbon V-Belts AP, BP, CP, DP, EP Chekmate 25% more belt life Double fabric covers Load Capacity one HP to 1100 HP Speed range 100 to 8000 RPM Eliminates match codes Reduces inventory Saves time Increases belt life Written guarantee Reduced maintenance & downtime Longer life Better protection for belt Wide range of applications FEATUREBENEFIT

3. Power Wedge Cog-Belt 3VX, 5VX, 8VX Raw edge sidewalls Con-Flex cog design Dayflex tension section Hi-modulus cords Stiflex compound compression section More torque with less slippage Conserves energy Longer belt life Eliminate belt whip & vibration Reduces belt temperature and stress Improved belt flex life Stretches up to 176% more Better belt stability Carries high HP loads Uniform cord support Longer belt life FEATUREBENEFIT

4. Power Wedge Cog-Belt 3VX, 5VX, 8VX Higher HP capability Narrow profile design Available through 200” OC Average 30% higher HP Reduces number of belts Greater design flexibility Allows use of smaller sheave Greater design freedom with reduced width Covers most popular sizes Use on a variety of drives FEATUREBENEFIT

5. Gold Ribbon Cog-Belt AX, BX, CX, DX Raw edge rubber sidewalls Precision molded cogs Increased HP rating Higher co-efficient of friction Reduced slippage Improved output performance Higher belt efficiency Improved flexibility Longer belt life Less power required from motor Can be used with smaller diameter sheaves More HP per belt Use fewer belts or longer life FEATUREBENEFIT

6. Gold Ribbon Cog-Belt AX, BX, CX, DX Neoprene rubber construction Static dissipation Chek-Mate Maximum heat resistance Maximum chemical resistance Maximum environmental condition resistance Longer belt life Transfers static build up to sheaves Protection in explosive atmospheres Inventory cost reductions Fewer matching errors FEATUREBENEFIT

7. Gold Ribbon Cog-Band RBX, RCX, RDX Permanent reinforced band Precision molded cogs Raw edge sidewalls Neoprene rubber construction Maximum belt stability Prematched belt lengths Reduced belt whip & turnover Improved belt flex Longer belt flex life Less power required from motor Higher co-efficient of friction Reduced slippage, higher efficiency Maximum resistance to the elements Improved belt life FEATUREBENEFIT

8. Synchro-Cog Timing Belt MXL, XL, L, H, XH, XXH Trapezoidal tooth profile Wide range load capacities & speeds No lubrication High mechanical efficiency Does not require friction to operate Non-slip positive engagement No speed variations Synchronization between driver & driven unit Fractional to hundreds of horsepower Torque loads to thousands of foot-pounds Wide range of applications Clean, maintenance free Energy savings Reduced overhung bearing loads Improved motor life. Less heat build-up. Reduced maintenance FEATUREBENEFIT

9. RPP Plus Synchronous Belt 5M, 8M, 14M, 20M Reinforced Parabolic Profile Wide range load capacities & speeds No lubrication High mechanical efficiency Does not require friction to operate Positive slip-proof engagement No speed variations Speed range more than double of chain Torque loads to thousands of foot-pounds Wide range of applications Clean, maintenance free Energy savings Reduced overhung bearing loads Improved motor life. Less heat build-up. Reduced maintenance FEATUREBENEFIT Transmits more power than trapezoidal tooth and reduces backlash for more precise synchronization between driver and driven unit.

10. RPP Plus Synchronous Belt 5M, 8M, 14M, 20M High torque capability Precision ground rubber backing Fiberglass cord Double nylon fabric tooth cover Reduced noise More economical than chain Consistent uniform thickness Reduced vibration Improved flexibility Length stability Belt strength High resistance to wear and shear Longer belt life FEATUREBENEFIT Increased resistance to tooth shear with reduced noise in comparison to trapezoidal toothed belts.

11. RPP Panther Synchronous Belt 8M, 14M, High torque capability Precision ground neoprene rubber backing ULTR-CORD tensile member Nylon fabric tooth cover Able polymer Outperforms chain and gear drives Outperforms conventional synchronous systems Maximum resistance to heat build up, flex fatigue Ideally suited for backside idlers Dimensional stability, Lower installation tensions Higher horsepower rating, Shock load resistance Improved flex life, Doesn’t absorb moisture Superior resistance to heat, ozone, wear, abrasion Increased drive efficiency Improves belt life Increased resistance to tooth shear and jump FEATUREBENEFIT Quiet, powerful, maintenance free.

12. Variable Speed Cog-Belt Raw edge sidewalls Dayflex tension section Hi-modulus cords Stiflex compound compression section Precision molded cogs Improved gripping contact with sheave Smoother, quieter belt operation Improved belt flex life Stretches up to 176% more Better belt stability Carries high HP loads with minimum stretch Uniform cord support Crosswise rigidity Longer belt life Cooler operating Maximum flex life FEATUREBENEFIT

13. XDV Xtra Duty V-Belt 38X, 48X, 58X Aramid cord All belt compounds Specially designed clutching cover Base cushion compound Maximum resistance to shock loads Minimizes belt stretch Superb resistance to the elements Greater flexibility Longer life Optimal clutching characteristics Smooth & reliable transfer of power Best performance with back side idlers FEATUREBENEFIT Engineered for maximum life and performance on abusive lawn and garden applications.

14. www.CarlisleBelts.com www.c-rproducts.com sales@c-rproducts.com Tel: +44 1327 701030 Fax: +44 1327 701031 from