Download presentation
Presentation is loading. Please wait.
Published byGeorgina Charles Modified over 9 years ago
1
Chemical Protective Clothing
2
Principal Objective Participants leave with an appreciation for the selection and use of protective clothing
3
Specific Objectives Describe the factors to consider in selecting protective clothing Recognize categories of hazards Identify exposure routes List regulations and standards affecting selection of protective clothing
4
Specific Objectives Know differences among degradation, penetration, and permeation Read and interpret a permeation chart Select the appropriate protective clothing for a specific situation
5
Problem Scope BLS: skin disease is #1 NIOSH: one of the top 20 H&S issues Large surface area: opportunity Site of direct injury Route of entry
6
Skin Disorders About 1/3 of all reported occupational illnesses Classifications Contact dermatitis Photosensitivity Occupational acne Pigmentary abnormalities Cancers Burns
7
Skin as Route of Entry Systemic Intoxication Sole route of entry Additional to inhalation
8
Direct Causes Chemical Biological / Botanical Mechanical Physical
9
Industries By Incidence Agriculture / Forestry / Fishing Manufacturing Others Construction Services Transportation Mining
10
Industries By Processes Machine Tools: Cutting Oils and Coolants Plastics Manufacturing Rubber Manufacturing Food Processing Leather Tanning and Finishing Agriculture Metal Plating and Cleaning Construction
11
Factors to Consider in Selecting Protective Clothing Hazards - physical, chemical, biological Exposure duration Regulations and standards Level of protection required - EPA Material properties Garment design
12
Considerations: Selecting Protective Clothing Availability of Technical Data Storage, Maintenance, Inspection, Testing Requirements Decontamination Issues - reuse, disposal Reusable or Limited Use Disposability
13
Considerations: Selecting Protective Clothing Shelf Life Availability Cost Human Factors Environmental conditions
14
Industrial Hygiene Process Is protective clothing needed?
15
Industrial Hygiene Process ANTICIPATION HAZARD RECOGNITION EVALUATION CONTROL
16
Hazard Control Hierarchy Administrative: Operating procedures, e.g., work/rest regimes Personal Protective Equipment: Protective apparel (clothing) Respiratory protection Eye and face protection Hand protection Foot protection Head protection
17
Definitions Toxicity The inherent ability of a substance to cause harm if there is significant exposure Hazard The probability that a substance will harm when it is used in a particular quantity and manner
18
Hazard Categories Chemical Hazards Particulates, fibers Metal Fumes Toxic/Inert Gases Solvent Vapors Corrosives Flammables Explosives Chemical warfare agents
19
Hazard Categories Physical Hazards Cold/Hot Surfaces Cold/Hot Ambient Temperature Heat Stress Steam Sharp edges, sharp points Slippery Surfaces Uneven Terrain Low Visibility Nip points, pinch points
20
Risk = Hazard x Exposure
21
Hazards Assessment Process Select and have affected employee(s) use properly fitted PPE as indicated Certify in writing that a workplace hazard assessment has been done
22
Chemical Hazard Group Carcinogens/Cancer Teratagen/Developmental Toxin Mutagen/Reproductive Toxin Irritants Narcotics Sensitizers Corrosives Asphyxiants
23
Protective Equipment & Clothing: Is all of this needed?
24
Hand Protection: Gloves Gloves are made from many polymers Butyl Isobutylene- isoprene rubber Natural rubber Neoprene, Chloroprene Nitrite, Acrylonitrite- butadiene rubber Polyethylene Polyvinyl Chloride Polyvinyl Alcohol Polyurethane Viton Polylaminate
25
Hand Protection: Gloves Gloves for physical hazards Cotton Leather Synthetic fiber Synthetic film Steel yarn
26
Protection Level History In early 1980’s, EPA established protection levels for PPE for hazardous chemical remediation In 1990, OSHA adopted EPA levels as part of final rule for hazardous waste operations and emergency response Levels now frequently used to describe full body clothing
27
EPA Levels of Protection
28
Selection of CPC
29
Quick Selection Guide to Chemical Protective Clothing Almost 800 chemicals with CAS number and risk codes Approximately 1000 more/corrected selection recommendations in 96 of the total 99 chemical classes/subclasses (ASTM F-1186) 19 representative barrier materials A new feature is the Trade Name Table containing single and multi-layer generic materials vs. 22 test chemicals (ASTM F-1001/EN374-1)
31
Master Chemical Resistance Table containing 800 chemicals organized in 96 chemical classes
32
Chemical Index containing 800 chemicals, synonyms, CAS numbers, Risk Codes and Risk Phrases
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.