Download presentation
1
48 FIBRE DUCT OFC ( RIBBON TYPE )
12 Fibre Ribbon Thixotropic Jelly Loose Tube FRP Rod Flooding Jelly Polyester Tape Rip Cord HDPE Sheath PA-12 Jacket
2
48 FIBRE DUCT OFC ( RIBBON TYPE )
No. of Loose Tubes 4 Nos No. of 12 Fibre ribbons per Loose Tube 1 No. Colour of Loose Tubes Blue , Orange & Natural ( 2 Nos.) Diameter of Cable 19.0 ± 0.5mm Weight of Cable 290 kg / km Tensile Strength 6kN Packing Length 2 k.m ± 10 % * : Typical values which may vary as per Customer Spec
3
48 FIBRE DUCT OFC (UNITUBE)
Optical Fibres Bundles Thixotropic Jelly Loose Tube Polyester Tape Water Swellable Tape GFR Yarns HDPE Sheath Rip Cord PA-12 Jacket FRP Rod 1.2x3Nos.
4
48 FIBRE DUCT OFC (UNITUBE)
No. of Loose Tubes 1 Nos. No. of Fibres per Loose Tube 48 Nos Colour of Fibres in Loose Tube Blue ,Orange , Green , Brown , Slate , White , Red , Black , Yellow , Violet , Rose & Natural Colour of binders Blue , Orange , Green & Brown Diameter of Cable 12.4 ± 0.5mm Weight of Cable 120 kg / km Tensile Strength 2670N Packing Length 2 k.m ± 10 % * : Typical values which may vary as per Customer Spec
5
24 F FIGURE-8 AERIAL OPTICAL FIBRE CABLE
MESSANGER WIRE HDPE SHEATH Optical Fibre Thixotropic Jelly FRP Rod Loose Tube Flooding Jelly Polyester Tape Rip Cord HDPE Sheath
6
24 F FIGURE-8 AERIAL OPTICAL FIBRE CABLE
24F as per ITU-T G652 Fibre / loose tube 4 ( Blue , Orange , Green & Natural ) No. of loose Tubes & colours 6 (Blue , Orange & Natural – 4 Nos.) Cable Minor Axis 9.6mm ± 0.5mm Messenger Wire 1.25 x 7 wires Cable Major Axis 18mm ( Nominal ) Weight of cable 172 kg/km ( Nominal ) Maximum Tensile Strength 3*9.81*W Impact Resistance 25Nm Crush Resistance 2000N for 10 x 10cm Minimum Cable Bend 20D Packing Length 2 k.m + 100m * : Typical values which may vary as per Customer Spec
7
24 F ADSS OPTICAL FIBRE CABLE
Optical Fibres Thixotropic Jelly FRP Rod Loose Tube Flooding Jelly Polyester Tape HDPE Inner Sheath Rip Cord Aramid Yarn Rip Cord HDPE Outer Sheath
8
PRODUCT : FIGURE –8 Cable
Applications : Figure –8 cables are designed for aerial applications. This cable features an integrated steel messenger wire and polyethylene outer sheath , because of superior design , continuous performance even in most severe conditions is ensured. Key Features Self Support design Internal messenger saves installation time and cost Able to support 2 – 96F Both unitube and multi loose tube constructions available
9
PRODUCT : ADSS Cable Applications : ADSS ( All dielectric self supporting ) cables are designed for aerial applications. This cable features high tensile aramid strength members and polyethylene outer sheath to ensure continuous performance even in most severe conditions Key Features Self Support design Internal messenger saves installation time and cost Able to support 2 – 96F Both unitube and multi loose tube constructions available
10
PRODUCT : Double Armoured Cable
Applications : Double armoured cables are designed for use in oil sector applications. This cable features high tensile aramid strength members , ECCS tape double armour and polyethylene outer sheath to ensure continuous performance even in most severe conditions Key Features High Tensile Strength of > 4700N Double ECCS Tape armour to provide excellent protection arainst rodent and physical damage Three layers of water swellable tapes used to resist ingress of water / oil Able to support 2 – 96F Both unitube and multi loose tube constructions available
11
PRODUCT : Distribution Cable
Applications : Distribution cables are designed for inter / intra building , LAN applications. The cable design allows easy connection and installation. Key Features High degree of flexibility Moderate Tensile strength Able to support 2 – 24F Low weight
12
24 F ADSS OPTICAL FIBRE CABLE
24F as per ITU-T G652 Fibre / loose tube 4 ( Blue , Orange , Green & Natural ) No. of loose Tubes & colours 6 (Blue , Orange & Natural – 4 Nos.) Diameter of Main core 14.3mm ± 0.5mm Weight of cable 162 kg/km ( Nominal ) Maximum Tensile Strength 3*9.81*W Impact Resistance 25Nm Crush Resistance 2000N for 10 x 10cm Minimum Cable Bend 20D Packing Length 2 k.m + 100m * : Typical values which may vary as per Customer Spec
13
24 F ARMOURED OPTICAL FIBRE CABLE
Optical Fibres Thixotropic Jelly FRP Rod Loose Tube Flooding Jelly Polyester Tape Water Swellable Tape HDPE Inner Sheath S.S.Tape / ECCS Tape HDPE Outer Sheath
14
24 F ARMOURED OPTICAL FIBRE CABLE
Fibre Type Single Mode ( 24 Nos.) No. of fibres per tube 4 Colour of fibre in tube Blue, Orange ,Green & Natural Diameter of Cable mm Weight of Cable 175 kg/k.m ( Nominal ) Tensile Strength > 2000N Crush Resistance Impact Resistance 25Nm – 10 impacts. Minimum Bend Radius 20D Operating/Storage & Installation Temperature -40 deg C to +70 deg C * : Typical values which may vary as per Customer Spec
15
6F PREMISE DISTRIBUTION OPTICAL FIBRE CABLE
Optical Fibres Thixotropic Jelly Loose Tube Aramid yarn HDPE Sheath Overall Diameter of cable : mm Weight of Cable : 36 kg / k.m ( Nominal ) FRP : 1.2mm * 3 Nos. Maximum Tensile Strength : 1.0 kN * : Typical values which may vary as per Customer Spec
16
2F INTERCONNECT OPTICAL FIBRE CABLE
Optical Fibres Loose Tube Thixotropic Jelly Aramid Yarn HDPE Sheath Overall Diameter of cable : mm Weight of Cable : 11 kg / k.m ( Nominal ) * : Typical values which may vary as per Customer Spec
17
* : Typical values which may vary as per Customer Spec
50 PAIR CABLE PIJF CABLE 10 Pair Unit Jelly Polyester Tape Poly-Al Tape Sheath Steel Tape Jacket No of Units 5 of 10 pair each Colour Binder Sequence Blue, Orange, Green, Brown, Grey Diameter of Cable 29.0* mm (max.) Wt of Cable 805* kg/Km * : Typical values which may vary as per Customer Spec
18
* : Typical values which may vary as per Customer Spec
100 PAIR CABLE PIJF CABLE 20 Pair Unit Jelly Polyester Tape Poly-Al Tape Sheath Steel Tape Jacket No of Units 5 of 20 pair each Colour Binder Sequence Blue, Orange, Green, Brown, Grey Diameter of Cable 36.0* mm (max.) Wt of Cable 1380* kg/Km * : Typical values which may vary as per Customer Spec
19
[Cable Designs] AERIAL CABLE OUTER SHEATH ARAMID YARN
FIBRE IN LOOSE TUBE STRENGTH MEMBER (FRP) ORANGE STRIPE
20
QUALITY COMMITMENT Aiming for Zero customer complaints through 100% vigorous checks at each stage of production. Aiming for making faults to Zero level by root cause analysis and & corrective actions.
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.