Download presentation
Presentation is loading. Please wait.
Published byMelvin Jackson Modified over 9 years ago
1
4-Integrating Peripherals in Embedded Systems (cont.)
2
Analog-to-digital converters
Why Analog? Not everything is digital! Even digital signaling has analog aspects (!?) Analog circuits and analysis are still necessary Physical phenomena (i.e., the real world) are usually analog Many sensors are analog (potentiometer, phototransistor, thermo-sensor, microphone) Many actuators are analog (solenoid, speakers) Some signals need to be processed in analog domain before conversion to digital (amplification, filtering, linearization)
3
Analog-to-digital converters
proportionality Vmax = 7.5V 0V 1111 1110 0000 0010 0100 0110 1000 1010 1100 0001 0011 0101 0111 1001 1011 1101 0.5V 1.0V 1.5V 2.0V 2.5V 3.0V 3.5V 4.0V 4.5V 5.0V 5.5V 6.0V 6.5V 7.0V analog to digital 4 3 2 1 t1 t2 t3 t4 0100 1000 0110 0101 time analog input (V) Digital output digital to analog 4 3 2 1 0100 1000 0110 0101 t1 t2 t3 t4 time analog output (V) Digital input
4
Analog to Digital Conversion
Instantaneous amplitudes of continuous analog signal, measured at equally spaced points in time. A series of “snapshots” Error=1/2 LSB
5
Analog to Digital Overview
Sampling Rate How often analog signal is measured [samples per second, Hz] Example: 44,100 Hz Sampling Resolution [a.k.a. “sample word length,” “bit depth”] Precision of numbers used for measurement: the more bits, the higher the resolution. Example: 16 bit
6
Sampling Rate Determines the highest frequency that you can represent with a digital signal. Nyquist Theorem: Sampling rate must be at least twice as high as the highest frequency you want to represent. Capturing just the crest and trough of a sine wave will represent the wave exactly.
7
Digital and Analog Conversion
A/D transfer function: 10-bit ADC converter 1024 voltage levels between 0V and VREF 10-bit digital value Usually VDD=VREF (e-Vmin)/(Vmax-Vmin)=d/(2^n-1), When Vmin=0: e/Vmax=D/(2^n-1) In general Vmax match 2^n-1 Vmin match 0 How does D/A and A/D conversion work?
8
D/A Conversion D/A is simpler than A/D
Different resisters and an inverted OpAmp, to implement a weighted summer. Example: 4-bit D/A If D3D2D1D0=0001 (i.e., 0V,0V,0V,-5V) Vo=-1.1*(D0/17.6+D1/8.8+D2/4.4+D2/2.2) =0.3125V If D3D2D1D0=1111 (i.e., -5V,-5V,-5V,-5V) =4.6875V
9
A/D Conversion Use D/A converter to generate different analog values and compare Control logic decides which values to try When comparison complete, best match is put on output How can D/A be matched to input in fewest steps?
10
Successive Approximation (SAR) ADC
Matching strategies: Counting conversion (slow) Successive approximation (faster) Successive Approximation: Basically binary search: Exact 10 steps instead of 1024, SAR is fast!
11
Digital-to-analog conversion using successive approximation
Given an analog input signal whose voltage should range from 0 to 15 volts, and an 8-bit digital encoding, calculate the correct encoding for 5 volts. Then trace the successive-approximation approach to find the correct encoding. 5/15 = d/(28 - 1)=d/255 d= 85 Encoding: Successive-approximation method ½(Vmax + Vmin) = 7.5 volts Vmax = 7.5 volts. ½( ) = 5.16 volts Vmax = 5.16 volts. 1 ½( ) = 3.75 volts Vmin = 3.75 volts. 1 ½( ) = 4.93 volts Vmin = 4.93 volts. 1 ½( ) = 5.63 volts Vmax = 5.63 volts 1 ½( ) = 5.05 volts Vmax = 5.05 volts. 1 ½( ) = 4.69 volts Vmin = 4.69 volts. 1 ½( ) = 4.99 volts 1
12
Analog to Digital Recording Chain
ADC Microphone converts acoustic to electrical energy. It’s a transducer. Continuously varying electrical energy is an analog of the sound pressure wave. ADC (Analog to Digital Converter) converts analog to digital electrical signal. Digital signal transmits binary numbers. DAC (Digital to Analog Converter) converts digital signal in computer to analog for your headphones.
13
Analog Representations of Sound
Magnified phonograph grooves, viewed from above: When viewed from the side, channel 1 goes up and down, and channel 2 goes side to side.
14
Common Sampling Rates Which rates can represent the range of frequencies audible by (fresh) ears? Sampling Rate Uses 44.1 kHz (44100) CD, DAT 48 kHz (48000) DAT, DV, DVD-Video 96 kHz (96000) DVD-Audio 22.05 kHz (22050) Old samplers Most software can handle all these rates.
15
Time — measure amp. at each tick of sample clock
3-bit Quantization A 3-bit binary (base 2) number has 23 = 8 values. 1 2 3 4 5 6 7 Amplitude Time — measure amp. at each tick of sample clock A rough approximation
16
Common Sampling Resolutions
Word length Uses 8-bit integer Low-res web audio 16-bit integer CD, DAT, DV, sound files 24-bit integer DVD-Video, DVD-Audio 32-bit floating point Software (usually only for internal representation)
17
The Digital Audio Stream
It’s just a series of sample numbers, to be interpreted as instantaneous amplitudes: one for every tick of the sample clock. Previous example: This is what appears in a sound file, along with a header that indicates the sampling rate, bit depth and other things.
18
Audio File Size CD Stereo characteristics:
- Sampling rate: 44,100 samples per second (44.1 kHz) - Sample word length: 16 bits (i.e., 2 bytes) per sample - Number of channels: 2 (stereo) How big is a 5-minute CD-quality sound file?
19
Audio File Size How big is a 5-minute CD-quality sound file?
44,100 samples * 2 bytes per sample * 2 channels = 176,400 bytes per second or =1.41 M bits per second Note for DVD audio: 48,000 samples instead of 44,100 = Mbps CD 5 minutes * 60 seconds per minute = 300 seconds 300 seconds * 176,400 bytes per second = 52,920,000 bytes = c megabytes (MB)
20
MPEG Compression #: The 384 is 1/4th of the 1.536 Mbps Data Reduction
Layer Bitrate (kbps) for stereo 1:4 1 384# 1:6..1:8 2 1:10..12 3 128…112 MPEG 1-Layer 3 (.mp3) “Motion Picture Experts Group” Different levels for different purposes E.g. MPEG 2 used for DVDs Takes out parts of the sound signal that humans can’t hear How does the size change? Lossy compression #: The 384 is 1/4th of the Mbps More on MPEG Compression
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.