2. Encompassed Ltd Adam Burns

3. Control of Asbestos Regulations 2006 What are the key changes? How do they affect you and your business?

4. Background Amendments to the European Asbestos Workers Protection Directive (AWPD) & the need to follow the industry drove the changes HSC began a consultation process –Took place between industry members until Jan ‘06 CAR 2006 introduced on 13 th November last year –Replace CAWR 2002, ASLIC 1983 and the Prohibitions Regulations 1992 Aim: Better protect maintenance workers and simplify the regulations

5. Change 1 Work with Textured Coatings (Artex™)

6. Work with Textured Decorative Coatings (Artex™) –Risks much lower than previously thought –Research & air-monitoring support this –In most cases, work is now non-licensable –Subject to RA concluding STEL won’t be exceeded –Safe removal techniques still important –Need to use Asbestos trained personnel –Waste needs to be disposed of appropriately

7. What does this mean for me? –It means the work requires less stringent controls –Therefore the work takes less time to complete –You should be looking for a reduction in costs associated with removal of Textured Coatings –Remember: Textured Coatings are NOT safe!

8. Textured Coatings & Demolition IF it is not reasonably practicable to remove coatings before demolition they can be left in If resulting waste contains <1% Asbestos; rubble can be used as in-fill or sent to land-fill Could save time and money but……… Moral issue here:– potential for fibres to be released into environment!

9. Change 2 Training Requirements

10. Asbestos Awareness Training Building Workers now have highest incidence of accidental exposure to Asbestos Maintenance workers, Electricians, Plumbers, Roofers, Cable Installers etc Education was seen as a good way to reduce this inadvertent exposure, so......

11. Asbestos Awareness Training Now a Mandatory Requirement for anyone who may be exposed to Asbestos whilst working

12. Asbestos Awareness Training HSE defined a syllabus to be covered Training must be given by a competent person Annual refresher training required Enforceable requirement Check sub-contractors have received it –Duty to ensure anyone conducting work on your behalf is trained

13. What are the realities of this? Some 1.8m workers need to be trained! The CDM regulations also support this requirement –Planning Supervisor & Principal Contractor Increased awareness amongst workers will save lives –HSE target is to save 5,000 lives

14. Change 3 Requirement to ‘reduce exposure to as low as is reasonably practicable’

15. What does this mean? A respirator is required for ALL work with Asbestos Previously, only required if action level was exceeded A ‘face-fit’ test is required along with a record of it taking place Employees entitled to copies of these records

16. What type of respirator? Must have a P3 particulate filter Ideally an Approved Protection Factor (APF) of 20 or more –i.e. APF 20 = airborne fibre levels reduced by 20x’s RPE is not as good as it was believed to be Sundstrom SR100: APF 20, £30

17. Change 4 Notification of Work to Local Authority/HSE & Medical Surveillance

18. Notification of Work & Medical Surveillance Will no longer apply where: –Worker exposure is sporadic and of low intensity –It is clear from the Risk Assessment that the STEL won’t be exceeded! Where notification is required: –Employees entitled to copies of medical records Confused?!

19. Notification of Work & Medical Surveillance If exposure likely to exceed 0.6f/ml over 10mins it is not ‘sporadic and of low intensity’ ACoP (L143) defines licensable work on same basis and gives examples Reflected in HSG 210 ‘Asbestos Essentials’ For most work, status quo maintained

20. Change 5 Clearance Certificates

21. Refers to licensed removals After April 6 th 2007, UKAS accreditation is a necessity for 4-Stage Clearance Certs. Clients responsibility to check analytical company is accredited to ISO 17020 and ISO 17025

22. Change 6 New Method for Classification of Asbestos (Insulating) Board

23. Asbestos (Insulating) Board Previously a density test was used –If density <1000Kg/m 3 = AIB Now a water absorption method is used –If materials weight increases by >30% after being submerged in water then it is AIB

24. Asbestos (Insulating) Board How will this affect me? –This means materials which were previously non-licensable could in fact now be licensable! Pay attention to analytical results –Failure to spot a change could be costly

25. Change 7 Control Limits and Short-Term Exposure Limits

26. Control Limit and STEL Undergone a few changes –Control Limit reduced to 0.1f/ml for all Asbestos types –Measured as a 4-hour TWA –STEL maintained in ACoP as 0.6f/ml over 10 minutes

27. Change 8 World Health Organisation (WHO) Fibre Counting Method to Replace European Reference Method (ERM)

28. WHO method to replace ERM Most analytical companies have transferred over Check that yours have What are the effects of the change? –Fibre counts ~20% greater –More air-testing failures for re-occupation –Greater emphasis on pre-cleaning should help

29. Change 9 Other changes

30. Miscellaneous Changes Asbestos is defined Supervisory & Ancillary work is defined As manufacture of Asbestos Products is banned; exemption for employers now removed More emphasis on pre-cleaning and planning to consider the clearance process

31. Control of Asbestos Regulations 2006 Summary

32. Textured coatings: Deregulated Awareness Training: Made mandatory RPE: Must be worn for all work Notification/Medical Exams: Licensed work Clearance Certificates: April 6 th UKAS accreditation for 4-stage clearance certs.

33. Summary Classification of AIB: New Method Control Limits/STEL: Lowered Counting Method: WHO replaces ERM Miscellaneous changes: –Asbestos Defined –Supervisory/Ancillary work defined –Exemptions removed –Pre-Cleaning emphasised

34. www. a sbestos a wareness.co.uk Questions? adam@encompassed.co.uk T:0845 050 8750 M:0772 543 11 33