1. Solar Mirrors: How Engineers Measure Mirrors Terminology used A little optics Standards How it all relates to solar energy application

2. Specular Reflectance Refers to reflectance as a function of wavelength In aluminum lighting market, the spectrum used is CIE (human eye response) visible light only In solar market, the spectrum used is the “standard solar spectrum”, often called the “air mass 1.5 spectrum” or AM1.5

3. FROM WIKIPEDIA

6. How Accurate Do Mirrors Need To Be? The sun’s disk appears to us on earth to be a light with a cone angle of plus or minus a quarter degree Mirror accuracy requirement depends on what kind of solar collector you are trying to make

7. Parabolic Troughs: Mirror Accuracy Requirements Depends on operating temperature requirements Typically want the mirror to make only small effect on the image at the receiver Goals of concentrator designers is typically to have total error under 10 mrad for high temperature systems Difficult to do with aluminum mirrors US DOE goal is <7 mrad

8. Aluminum Mirrors Typically have surface roughness on the order of 10-30 mrad Depends on treatment of mirror, polishing, whether vacuum coat process used

9. Angles for Typical Solar Trough

10. What is AM1.5? The sun’s spectrum changes over day due to air absorbance Example: sun appears orange at sunset Coloring is due to the atmosphere The “standard air mass 1.0” is the spectrum you get at sea level with the sun directly overhead The “air mass 1.5” spectrum is solar spectrum with sun at lower angle so light goes through 1.5 time more air This is a “typical” solar spectrum over day

11. “Air Mass 1.5”

12. What is “Wavelength” and Light?

13. What is the Sun’s Spectrum?

14. What Causes Dips in Sun Spectrum?

15. Total Hemispherical Reflectance: What Does It Mean? Total hemispherical reflectance is the reflectance of light off of a surface collected at all angles, +- 90 degrees A 100% white object can thus have a total hemispherical reflectance of 100% and not look at all like a mirror Standard measurement equipment measures over a full hemisphere Doesn’t tell you quite enough information about how “mirror-like” surface is, but still is used

16. ACA Mirrors Lowest cost type does not use vacuum processes Somewhat lower reflectivity than other aluminum mirrors Still very useful for many applications Here is how our lowest cost mirror data looks relative to a somewhat higher cost vacuum deposited mirror

17. ACA’s Lower Cost “Protectal” Mirror AM 1.5 total hemispherical reflectance is around 87-88%

18. Recent results-NREL Specula Reflectance with Total Hemispherical Reflectometer: Note Consistencies of measurements is good

19. What about specular reflectance of low cost “Protectal” mirror? Now, we need to talk specifics of all the various specular reflectance standards Some standards use very narrow angle of measurement, on the order of 1 degree Other standards use larger angle of measurement, on order of up to 10 degrees Look at specific standards now

20. Recent results-NREL Specula Reflectance with D&S Meter: Note Inconsistencies of measurements

21. One Type of Specular Measurement: The D&S Model 15

22. Reflectance Meters D&S Model 15 Used By NREL

23. Competitor: Alanod Data Showing Many Reflectance Measurements-Same Material