1. MTE´s Portable Product Portfolio
Page 1
April 2011

2. MTE Portables

3. K 2006 3-phase Comparator 30 V … 500 V 1 mA … 160 A Accuracy  0.01%
15 Hz - 70 Hz
Measurements of: voltage, current, active, reactive and apparent power, energy, frequency, power factor, error measurement and harmonic analysis
DC reference voltage input
Options:
CAMCAL® Software
CALSOFT Software

4. PRS 400.3 3-phase portable Reference Standard
0 V … 520 V (phase-neutral)
1 mA … 120 A direct connections
Clamp-on CTs: 100A  1.000A  FLEX up to 3.000A / Hot sticks for measurement on high voltage potential
Vector diagram, harmonics spectrum, wave form and rotary field display
Burden measurement and ratio tests of CT’s and PT’s
Transducer test
Accuracy  0.02 %

5. CALPORT 300 3-phase Meter and Instrument Transformer Test System
40 mV … 480 V
1 mA … 120 A
Accuracy  0.05 %
6 current inputs parallel for primary / secondary current measurement
Measurements of all electrical parameters (incl. vector diagram)
CT / PT testing (burden, ratio)
Options:
CALSOFT Software
Clamp-on CTs for 100A  1000A  FLEX 3000 up to 3000A  LiteWire Sensors up to 2000 A and 40 kV

6. PWS 3.3 3-phase Portable Working Standard and PQ Analyzer
Working Standard Functions
20 mV … 600 V (phase-neutral)
1 mA … 12 A direct connection
Measurements of all electrical parameters (incl. vector diagram)
CT / PT testing (burden, ratio)
Accuracy  0.1 %,  0.05 %
PQ Analysis Functions
Harmonics  Interharmonics  Signal voltages  Dips  Swells  Interruptions  Voltage unbalance
Options:
Clamp-on CTs for 100A  1000A  FLEX 3000 up to 3000A  LiteWire Sensors up to 2000 A and 40 kV

7. PWS 2.3 PLUS 3-phase Working Standard
20 mV … 300 V (phase-neutral)
1 mA … 12 A direct connection
10 mA … 100 A via clamp-on CTs
Measurements of all electrical parameters (incl. vector diagram)
CT / PT testing (burden, ratio)
Accuracy  0.1 %,  0.2 %
Options:
CALSOFT I Software
Clamp-on CTs for 1000A  FLEX 3000 up to 3000A  LiteWire Sensors up to 2000 A and 40 kV

8. CheckMeter 2.3 3-phase Working Standard
10 V … 300 V Auxiliary supply from the auxiliary supply or the measuring circuit
10 mA A via clamp-on CTs
Measurements of: voltage, current, active, reactive and apparent power, energy, frequency, power factor, error measurement, vector diagram
Accuracy  0.2 %
Options:
CALSOFT I Software
Clamp-on CTs up to 120 A (Measuring range 100 mA … 120 A, Cable : max 52 mm)

9. CheckMeter 2.1 3-phase Working Standard
10 V V Auxiliary supply from the auxiliary supply or the measuring circuit
10 mA A via clamp-on CT
Measurements of: voltage, current, active, reactive and apparent power, energy, frequency, power factor, error measurement
Accuracy  0.2 %
Options:
CALSOFT I Software
Clamp-on CTs up to 120 A (Measuring range 100 mA …120 A, Cable : max 52 mm)

10. MTE Portables

11. PPS 400.3-12 A 3-phase portable Voltage and Current Source
0 V V / 50 VA / Phase
1 mA A / 30 VA / Phase
Phase shifter -180° ° Hz
Stability  %/h ( = 150 s)
Generation of harmonics up to 31st
Ripple control signals
Options:
CALSOFT II
CAMCAL for Windows

12. PPS 400.3-120 A 3-phase portable Voltage and Current Source
0 V V / 50 VA / Phase
1 mA A / 80 VA / Phase
Phase shifter -180° ° Hz
Stability  %/h ( = 150 s)
Generation of harmonics up to 31st
Ripple control signals
Options:
CALSOFT II
CAMCAL for Windows

13. PPS 3.3 C 3-phase portable Voltage and Current Source
0 V V / 30 VA / Phase
1 mA A / 60 VA / Phase
Phase shifter -180° ° Hz
Stability  0.03 %/h ( = 150 s)
Generation of harmonics up to 31st
Ripple control signals
Options:
CALSOFT II
CAMCAL for Windows

14. CheckSource 2.3 3-phase electronic Current Source
1 mA A / 8 VA / Phase
Phase shifter -180° °
Stability better than % (30 min) 0.1 % (1 h)
Single phase supply  50 VA (typical)  65 VA (maximum)
Options:
CALSOFT Software

15. MTE Portables

16. PTS 400.3 3-phase portable Test system with Voltage and Current Source
Voltage source V
Current source 1 mA A / 120 A
Reference standard accuracy class 0.02 %
Measurement of all electrical values
Vector diagram, harmonic test, Data storage, Ratio test, Burden test
Automatic test runs without external PC
Options:
High current cables up to 120 A
Several Clamp-on CT´s
CALSOFT II Software
CAMCAL for Windows

17. PTS 3.3 C 3-phase portable Test system with Voltage and Current Source
Voltage source V
Current source 1 mA A
Integrated working standard accuracy class 0.05 %
Measurement of all electrical values
Vector diagram, Harmonic test, Data storage, Burden test
Automatic test runs without external PC
Options:
High current cables up to 120 A
Clamp-on CT´s 10 mA A
CALSOFT II Software

18. Checksystem 2.1 S 1-phase portable Test system with Current Source
Measurement range 10 mV V
Current source 1 mA A
Integrated working standard accuracy class 0.05 %
Measurement of all electrical values
Vector diagram, Harmonic test, Data storage
Automatic test runs without external PC
Options:
Clamp-on CT 10 mA A
CALSOFT Software

19. PTS 3.1 C 1-phase portable Test system with Voltage and Current Source
Voltage source V
Current source 1 mA A
Integrated working standard accuracy class 0.1 %
Measurement of all electrical values
Vector diagram, Harmonic test, Data storage, Burden test
Automatic test runs without external PC
Options:
High current cables up to 120 A
Clamp-on CT 10 mA A
CALSOFT II Software

20. PTS 2.3 C 3-phase portable Test system with Current Source
Measurement range 20 mV V
Current source 1 mA A
Integrated working standard accuracy class 0.1 %
Measurement of all electrical values
Vector diagram, Harmonic test, Data storage, Burden test, C.T. ratio test
Automatic test runs without external PC
Options:
Clamp-on CTs for 100A  1000A  FLEX 3000 up to 3000A
CALSOFT II Software

21. Checksystem 2.3 3-phase portable Test system with Current Source
Measurement range 10 mV V
Current source 1 mA A
Integrated working standard accuracy class 0.2 %
Measurement of all electrical values
Vector diagram, Harmonic test, Data storage
Automatic test runs without external PC
Options:
Clamp-on CTs 10 mA A
CALSOFT Software

22. Checksystem 2.1 1-phase portable Test system with Current Source
Measurement range 10 mV V
Current source 1 mA A
Integrated working standard accuracy class 0.2 %
Measurement of all electrical values
Vector diagram, Harmonic test, Data storage
Automatic test runs without external PC
Options:
Clamp-on CT 10 mA A
CALSOFT Software

23. CALSOFT Software tool to portable devices
Automatic single position measurement
Easy to understand presentation of all stored measured values
Vector diagram
Presentation of measured values
Presentation of harmonics
Print and data export functions
Works together with following portables:  K2006  PRS / CALPORT 300 / PWS PWS 2.3 PLUS / CheckMeter 2.x  PTS / PTS 3.3 C / PTS 3.1 C PTS 2.3 C / CheckSystem 2.x  PPS / PPS 3.3 C / CheckSource 2.3