1. Three tools to measure Quick, easy, and precise

2. How wide is the gap? Then add barrel Count.025 at each line.100 inside

3. Measure one inch one thousandths of an inch at a time Lines on cylinder are.025 each Numbers are hundred thousand each

4. Turn here Barrel One inch mike Measure from 0 to one inch 0 to 25 On barrel This mike reads.020 Do not use barrel to tighten

5. .000 Barrel count is up Barrel counts to.025 0 stands for.025 after.024 turn lock Hold mike by yoke

6. Slide #1 Reading

7. Slide number Two reading?

8. Number 3 ?

9. Number four?

10. Number five?

11. Number six?

12. Number seven?

13. Number eight?

14. What is the reading on number nine?

15. Number Ten?

16. Number eleven?

17. Number twelve?

18. Number 13?

19. Number 14?

20. Number 15?

21. Number 16?

22. Number 17?

23. Ruler measures in inch by 1/16ths or 1/8ths Or by 1/32nds as on first part of this ruler Or Metric in millimeters and centimeters (count by tens) One and one half inch Inch scale

24. Ruler number 18? Inch scale

25. Ruler number 19? Inch scale

26. Ruler number 20? Inch scale

27. Number 21? Inch scale

28. Ruler number 22? Inch scale

29. Ruler number 23? Inch scale

30. Ruler number 24? Inch scale

31. Ruler number 25? Inch scale

32. Ruler number 26? Inch scale

33. Ruler number 27? Inch scale

34. Number 28? Inch scale

35. Number 29?

36. Metric scale Number 30? Metric scale(answer should be in millimeters or centimeters)

37. Metric scale Number 31?

38. Metric scale Number 32?

39. Metric scale Number 33?

40. Metric scale Number 34?

41. Metric Scale Number 35?

42. Number 36 and this one is inch scale? Green arrow is end of bolt.

43. Number 37?

44. Number 38?

45. Metric scale Number 39?

46. Give metric measurement for this one, Number 40

47. ? Number 41?

48. Number 43? Number 42? Out side measure

49. 19mm Number 44, give in thousandths of inch?

50. Inside measurement Number 45, give in metric?.430

51. Outside Measurement Bonus number 46?