1. PRE-PRINT TECHNOLOGY LTD

2. Pre-Print Technology Linerflex

3. PRE-PRINT TECHNOLOGY LTD Pre-Print Machine Specifications Standard Features 6 or 8 Colour CI assemblies Maximum Web Widths from 1600mm (65”) To 2850mm (110”) Print Length Repeat Range From 700mm (28”) To 2000mm (78”) 250mpm (820fpm) Print Speed (Optional 300 - 365mpm) Automatic Print Unit Positioning with Closed Loop Deck Positioning Hot Air Drying System (Optional Infra Red & UV Curing Systems) Twin Shaftless Unwind with Optional Overlap or Butt Splicing Unit Twin Drum Surface Rewind Stand or Automatic Splicing Unit

4. PRE-PRINT TECHNOLOGY LTD CI SECTION

5. PRE-PRINT TECHNOLOGY LTD THE CI SECTION Standard Supply Temperature Controlled CI Closed Loop Print Unit Positioning Through Linear Encoders Automatic Gear Meshing Motorised Lateral & Longitudinal Register Adjustment Colour To Colour Registration ± 0.1mm (0.0039”) Hydraulic Locking of Print Units Inter-colour Drying for Water Based Inks (Optional Infra Red) Fully Interlocked Guarding System

6. PRE-PRINT TECHNOLOGY LTD CI SECTION

7. PRE-PRINT TECHNOLOGY LTD THE CI SECTION Options Available Robotic Print and Anilox Roll Change Automatic Washdown System CI Coatings Benefits 8 Colour to 8 Colour Roll Change in less than 50 Minutes Washdown System Providing Higher Returns On Ink with Minimal Water Usage - Reducing Downtime

8. PRE-PRINT TECHNOLOGY LTD Side View of Ink Unit

9. PRE-PRINT TECHNOLOGY LTD Automatic Locking Print / Anilox Locking Caps

10. PRE-PRINT TECHNOLOGY LTD Print / Anilox Roll Manipulator In to Out in under 60 seconds Full Changeover with Automatic washdown in less than 50 minutes Change Non-Printing units whilst machine is in production Motorised Roller Trolley Changeover Initiated through touchscreen control screen

11. PRE-PRINT TECHNOLOGY LTD Motorised Print/Anilox Roller Trolley

12. PRE-PRINT TECHNOLOGY LTD Roller Racking Systems

13. PRE-PRINT TECHNOLOGY LTD Peristaltic Ink Pumping System AC Motor Control Two Pumps per Print Unit for Positive Feed AND Return No Height Limitation Less Foaming

14. PRE-PRINT TECHNOLOGY LTD THE UNWIND SECTION Standard Supply Twin Shaftless Unwind Maximum Diameter of Reels 1500mm (60”)

15. PRE-PRINT TECHNOLOGY LTD Twin Shaftless Unwind Stand with Auto Splicing Unit

16. PRE-PRINT TECHNOLOGY LTD THE UNWIND SECTION Options Available Max Diameter of Reels 1800mm (70”) Automatic Lap or Butt Splicing Unit Electronic Tension Control Infeed Web Conditioning Unit Auto Roll Loading Option Benefits Reduced Downtime Less Waste Reduced Damage to Printing Plates Improved Productivity Improved Tension Control

17. PRE-PRINT TECHNOLOGY LTD IN-LINE PRINT / VARNISH UNITS Options Available Single or 2 Stack Arrangement In Register With CI ± (1mm) Water Based Inks/Varnishes Automatic Washdown as CI section UV Varnishes Cantilevered Print Sleeve Change Additional Register controls with Video Web Inspection Systems

18. PRE-PRINT TECHNOLOGY LTD DRYING SYSTEMS Standard Supply Hot Air Supplied From Your Preferred Heating Source Gas, Electric or Steam 2 Zones for Controllability Re-Circulation for Extra Efficiency Options Available Steam / Electric Heating Sources Infra-Red Drying In-Line, Individually Zoned Drying In-Line UV Curing for Varnish Applications

19. PRE-PRINT TECHNOLOGY LTD

20. Automatic Twin Drum Rewind Unit

21. PRE-PRINT TECHNOLOGY LTD ATD REWIND Standard Supply Twin Drum Surface Rewind Maximum Diameter of Reels 1500mm (60”) Options Available Automatic Twin Drum Splicing Rewind Maximum Diameter of Reels 1800mm (70”)

22. PRE-PRINT TECHNOLOGY LTD Optional Additions Video Web Inspection CI Coatings Web Pre-Conditioning Web Cleaning Systems Motorised Unwind Reel Trolleys Rewind Web Slitting Units

23. PRE-PRINT TECHNOLOGY LTD In-Line Editing

24. PRE-PRINT TECHNOLOGY LTD Pre-Print Technology Advantages  Full Turnkey Operation  Total Engineered Solution  Integrated Technology  Greater Experience in Wide Web Press Design  More On-Press Options to Minimise Waste / Downtime

25. PRE-PRINT TECHNOLOGY LTD PPT Engineering Advantages  Engineering Features Available  In-Line Editing (Zero Waste Reels)  Twin Drum Continuous Rewinder  Closed Loop Register System  Choice of Drying Source  UV Applications available without Re-Engineering

26. PRE-PRINT TECHNOLOGY LTD PPT Support Advantages  Total Support from PPT  Trained Technicians / Support  Immediate Customer Assistance

27. PRE-PRINT TECHNOLOGY LTD PPT Pre-Print Advantages  Benchmark Training to all press crews  Regular Press Audits  Supplier Forums

28. PRE-PRINT TECHNOLOGY LTD PPT Engineering Considerations  Central Impression Cylinder Tolerances  Impression Cylinder Gear Tolerances  CI Thermal Stability During Production  Accessibility Between Colour Units  Rigid Framework  To Produce Quality Print