1. Tray Traveler Reliance Fall Protection Cable tray trolley
Active engineered system
Limited to Cooper B-Line
26" wide and 36" wide 6063 aluminum cable trays
5” NEMA VE1 6” side rail height
Limited to 200-lb man & equipment on 20-ft Sub-spans

2. Note: work-bed can be offset or centered on twin offset axles that travel on dual-rim tracking UHMD PE wheels. The floating axles are independently captured to prevent disengagement from work-bed. Four channel screw posts allow for adjusting of lateral positioning
Single Jig cam brake should be applied only when transitioning (vertical locked; or offset to 10 o’clock for release) Brake pads rubber w UHMD glide
to prone position
or exiting prone position to standing position

3. Two Dual Density wedge pads allow positioning for comfort & clearance of above obstructions
Dual Anti-tipping gate swings into place after laying in the prone position. The swing-bars follows movement to prevent tipping. NOTE: These bars need to swung to 9 o’clock position before installing trolley wheels on Cable Tray

4. Foot Rest Bar to provide change of positing of body & stretch extensors muscles
Could be used for a tool tray

5. Pan length may need to be shortened or lengthened to accommodate upper legs & provide knee pad (pad will follow) to stand
Width of tray adjustment 24” to 42” per request.
Gliding foot rest moves easily to accommodate ingress and egress
Other Action Items not addressed:
D-rings for Dropped Tool tethers

12. Lifting Lug
tool tether rings attached to frame
blinding off rail lock nuts so they will not come off
Possibly relooking at version 1 of foot rest. (however it may not have durability)
Finished model with have cast wheel guards & other manufacturing refinements.