1. Fire Marshal’s Office Department of Environmental Safety LABORATORY FIRE SAFETY LABORATORY. FIRE SAFETY

2. Objectives 1. Learn UMD Emergency Procedures. 2. Become familiar with emergency equipment in your area and learn how to use it. 3. Identify fire hazards in laboratory settings:

3. On January 15, 2001, a fire occurred in a Chemistry Building laboratory. A 4-liter bottle of flammable liquid broke inside a fume hood, emptying its contents into the hood and onto the floor. Several hot plates were located inside the hood and ignited the flammable liquid. A researcher was unable to extinguish the fire with two portable fire extinguishers and quickly exited the laboratory. 911 was called. Other bottles of flammable materials soon broke, providing more fuel and allowing the fire to intensify. Soon after, a small explosion occurred when flammable materials stored in the cabinet underneath the hood became involved in the fire. The Fire Department extinguished the fire. Texas Tech – January 15, 2001

4. Emergency Response Guide Know Your Emergency Procedures EMERGENCY RESPONSE RADIATION SPILL CHEMICAL SPILL BIOLOGICAL SPILL PERSONAL INJURY FIRE UNIVERSITY OF MARYLAND DEPARTMENT OF ENVIRONMENTAL SAFETY DIVISION OF ADMINISTRATIVE AFFAIRS

5. Become familiar with procedures in your laboratory

6. Activation of the Fire Alarm System Know the locations of the nearest fire alarm pull stations The fire alarm is monitored by the Dept. of Public Safety

7. Evacuation Plan Know the locations of the nearest exit and alternate exits Know how to be accounted for

8. Emergency Telephone Numbers Campus Campus Phones Phones 911 911 Cell Phones Cell Phones #3333 #3333 Verizon Wireless, Sprint Nextel, ATT, and T-Mobile ALL FIRES, INCLUDING EXTINGUISHED FIRES, MUST BE REPORTED TO THE FIRE DEPARTMENT 301-405-3333 Others Others

9. Know Where Emergency Equipment is and How to Use It

10. Fire Alarm System Fire Alarm may be activated automatically by smoke detectors or the sprinkler system in addition to manually by pull stations

11. Sprinkler System Sprinklers are activated individually by heat and are automatic Not all laboratories are sprinklered

12. Sprinkler System www.canutesoft.com

13. Fire Extinguishers Fire Extinguishers are placed in certain locations as required by the fire code. Total and immediate evacuation is safest. The UM Policy on Fire Emergencies is a total evacuation policy. You are required to fight a fire. NOT

14.  DO NOT place yourself or others in danger  DO NOT delay activation of the fire alarm  DO NOT delay notification of the fire department  If you are trained in the safe use of fire extinguishers and chose to fight a fire:

15. Emergency Shower and Eyewash Station

16. Fire Blankets Fire blankets are not supplied

17. Know How to Operate Your Equipment

18. Natural Gas Valves Make sure valves are fully closed when not in use Be aware of open valves and leaks DO NOT disregard slight odors

19. Heat Producing & Electrical Equipment Be familiar with controls and features. All unattended heat producing equipment is required to have a manual reset over- temperature switch. All unattended operations must be provided with automatic shutdown to prevent system failure that could result in a fire or explosion. Operate equipment in accordance with manufacturer’s instructions. Make sure equipment is turned off when not in use.

20. Keep heat producing equipment clear of flammable and combustibles. Electric stirrers, when used with combustible or flammable liquids which are heated above their flash points, must be suitable for such use. Refrigerators, freezers, or coolers must be prominently labeled to indicate whether they are or are not suitable for storing flammable liquids. Use only properly installed electrical wiring and UL listed/FM approved electrical equipment – avoid extension cords.

21. Electrical Safety Misuse of extension cords is the most common electrical hazard found in labs

22. Electrical Safety Use power strips with built in circuit breakers. Use electrical equipment that is listed and use it according to manufacturer’s instructions

23. Know The Properties of The Material You Are Working With

24. Oxidizers Oxidizers produce oxygen that supports and accelerates fires Examples: Nitric Acid, Oxygen Hazards: Increase intensity of fires, may react like explosives

25. Organic Peroxides Examples: Hydrogen Peroxides, Peracetic Acid Hazards: Unstable and explosive in fires, extremely flammable, may be shock and friction sensitive

26. Corrosives Liquids or solids that destroy human tissue Examples: Hydrochloric Acid, Nitric Acid, Picric Acid Hazards: Can be oxidizers, water reactive, unstable, poisonous

27. Explosives Explosives require, licenses, permits and special storage arrangements

28. Compressed Gas May be flammable, non- flammable, liquefied, or cryogenic Examples: Propane, hydrogen, oxygen and liquid nitrogen Hazards: May be flammable, may support combustion (oxidizer), high expansion ratios, B.L.E.V.E. One spare cylinder allowed per operation in laboratories

29. Flammable Solids Alkali metals that burn under certain conditions Examples: Magnesium, Sodium, Phosphorous Hazards: Ignite easily and burn violently, may react with water and air, produce toxic or corrosive vapors

30. Flammable and Combustible Liquids Give off concentrations of vapor which form an ignitable mixture with air Examples: Ethyl Ether, Toluene, Glacial Acidic Acid Hazards: Ignitable and burn, hazards associated with other chemical classes.

31. Storage and Use of Flammable And Combustible Liquids

32. Flammable Liquids Storage Cabinet Keeps fire away from flammable vapors May ONLY be ventilated directly to the outside IF specifically necessary (i.e., exposure concentration concerns)

33. Flammable Liquids Storage Refrigerator Keeps ignition sources away from flammables stored inside Explosion Proof only necessary in hazardous locations $$$

34. Factors Affecting Storage and Use Layout, construction, and arrangement of buildings Classification of liquid Quantities of liquid Type of container

35. Summary Of Storage Requirements There is a maximum quantity of liquid that can be stored outside of a flammable liquid storage cabinet or safety cans. The maximum quantity in an instructional laboratory is 50% less than that for a research laboratory. A maximum of 120 gallons of Class I, Class II, Class IIIA liquids may be stored in a flammable liquid storage cabinet. Of this total not more than 60 gallons shall be of Class I and Class II liquids. Not more than 3 such cabinets are allowed per fire area.

36. There is a maximum quantity of liquid that can be stored in any laboratory including inside a flammable liquid storage cabinet. The maximum quantity in an instructional laboratory is 50% less than that for a research laboratory. The quantity is based on many factors. Rule of Thumb – Store the minimum amount necessary, keep it in a flammable liquid storage cabinet and take out only what you need when you need it.

37. Flammable and Combustible Liquids Keep aisles clear for emergency egress Do not place items in corridors or stairwells Do not place flammable liquids near exits Do not obstruct fire safety equipment Keep lab area neat Properly segregate chemicals

38. Reference Material NFPA Fire Protection Guide on Hazardous Materials (Latest Edition) NFPA NFPA 45 Standard on Fire Protection for Laboratories Using Chemicals DES www.des.umd.edu UMD Policy on Fire Emergencies UMD Policy on Means of Egress