1. C. Measurement Systems and Linear Measurement Math 10: A and W WA10.3 Demonstrate understanding of measurement systems including: The Système International (SI) The British Imperial system The US customary system. WA10.4 Demonstrate, understanding of linear measurement, including units in the SI and Imperial systems of measurement.

2. Key Terms: Find the definitions of each of the following terms: Base Unit Systeme International Imperial System Conversion Factor Referent

3. 1. Linear Measurement WA10.3 Demonstrate understanding of measurement systems including: The Système International (SI) The British Imperial system The US customary system. WA10.4 Demonstrate, understanding of linear measurement, including units in the SI and Imperial systems of measurement.

4. Fractions Review It is nearly impossible to use any form of measurement without having a way to express fractions

5. A fraction may be expressed in 3 different ways without altering its value: As a fraction As a decimal As a percent

7. Remember that only fractions with common denominators can be added and subtracted

8. Examples

9. Fractions like these are seen and used more in the Imperial System, which we will look at soon. Decimals are used and seen more in the SI System

10. In Canada, we use two systems of measurement: the Systeme International d’unites (SI) also known as the metric system and the Imperial System

11. Although we use the SI most often in our daily lives, imperial measurements are also used in many trades. For example, plumbers and carpenters typically take measurements in feet and inches, which are imperial units. To work in the trades you need to be familiar with both SI and imperial systems.

12. a)In the SI system, the base unit for measuring length is the meter (m). The base unit for measuring volume is the liter (L). The SI is a decimal system because it is based on multiples of 10. Any measurement stated in one SI unit can be converted to another SI unit by multiplying or dividing by a multiple of 10.

13. Multiples of the base units (m) are indicated by SI prefixes For example, the prefix centi means one- hundredth, so 1 centimeter is one-hundredth of a meter (0.01). The prefix kilo means 1000 so 1 kilometer equals 1000m.

14. SI Units of Measurement (length) SI PrefixSymbol Combined Symbol kilo hecto deca meter deci centi milli

15. b)In the Imperial System, the base unit for measuring length is the foot and the base unit for measuring volume is a pint. The imperial system is not a decimal system, and rather uses fractions.

16. Because the imperial units were developed at different times to meet different needs, each group of units has a particular relationship. For example, there are 12 inches in a foot and there are 3 feet in a yard.

17. Imperial Units of Measurement (length) UnitAbbreviation inch foot yard mile

18. In order to solve measurement problems, you may have to convert the given measurements into common units. To convert from unit to another is the SI system we mulitply or divide by multiplies of 10

19. To convert from a smaller measurement to a larger measurement unit we divide by a multiple of 10 and move the decimal to the left. To convert from a larger measurement to a smaller measurement unit we multiply by a multiple of 10 and move the decimal to the right.

20. Converting to mConverting from m

21. Example 1.Andre is installing a chandelier is a house with a 2.4m ceiling. The chandelier hangs down 51cm. His client is 1.8m tall. Will Andre’s client be able to walk under the chandelier?

22. To convert from one imperial unit to another imperial unit, you use a unit conversion factor A unit conversion factor is a fraction that is equal to 1. The numerator of the fraction contains the units to which you want to convert. The denominator of the fraction contains the original units in which the measurement was taken.

24. So what would the conversion factor be for converting feet to inches?

25. Activity 3.1 – Exploring Imperial Units p. 96 Grab some measuring tools for measuring both imperial and SI units Move through the activity doing each question for both imperial and SI units

27. Example 1

28. Example 2.Kiri needs to replace the wooden fence that surrounds her yard. She measured her property, and it is 18 yards wide and 12 yards deep. There is no fence in front of her house, and the gap in the fence at the front of the property is 42 feet. Kiri plans to replace the existing fence pickets with 5- foot-long cedar boards placed vertically. The boards are 5 ½ inches wide and will be spaced ¼ inch apart. She ordered 275 boards. Dis she order enough boards?

30. Example 3

31. Activity 3.3 – Designing a tin can layout p. 101 We will read through this together and solve.

32. Mental Example 1.The Canadian Football League record for the longest field goal is held by Paul McCallum. In 2001, while playing for the Saskatchewan Roughriders, he kicked a 62-yard field goal. How many feet is that?

33. Building your Skills Ex. 3.1 (p. 102) #1-8

34. 2. Converting Linear Measurements WA10.3 Demonstrate understanding of measurement systems including: The Système International (SI) The British Imperial system The US customary system. WA10.4 Demonstrate, understanding of linear measurement, including units in the SI and Imperial systems of measurement.

35. 2. Converting Linear Measurements Math on the Job p. 106 Read through together and solve

37. In many jobs you need to know how to convert from SI units into imperial units. For example, the US, which is Canada’s largest trading partner, uses imperial units, so doing business with a US company, you need to know the equivalent of SI unit.

38. We will be using proportional reasoning and conversion factors to convert between SI and imperial units.

39. Activity 3.4 – Converting between SI and Imperial Units p. 107 Work through with a partner.

41. Discuss the Ideas – Installing a Chandelier p. 107 Read through together and solve

42. Example 1.The land speed record is the fastest speed achieved on land by any wheeled vehicle. A turbofan- powered car holds the current record. The car reached a speed of 766.609 mph for one mile, breaking the sound barrier. a)Express the statement about the car’s speed in kilometers per hour. b)At 15°C, the speed of sound is 1116ft/s. This speed is given a measurement called Mach 1. How many miles per hour above Mach 1 was the car’s top speed? How many kilometers per hour above Mach 1 was that speed?

43. Example

44. Building your Skills Handout