Download presentation
Presentation is loading. Please wait.
Published bySharleen Lindsey Fleming Modified over 9 years ago
1
1 Job Element Sheet Process: Cheesecake Bake – Depanning Process Author: Andreana Crance, RIT MSD Date/Revision: 2/11/10, Rev 0 Post Tunnel Oven: 1.Dump water from sheet pan into receptacle 2.Place sheet pan on tray, filling both sides 3. Wheel full tray to depanning queue If Large Cheesecakes: A. Wheel tray into cooler for 15-20 m. Ensure they are used in a First In First Out order Cooler for Large Cakes Depanning queue
2
2 Job Element Sheet Process: Cheesecake Bake – Depanning Process Author: Andreana Crance, RIT MSD Date/Revision: 2/11/10, Rev 0 Depanning Process: 4. Set up depanning area as shown in picture below - Bread Baskets - Insert Sheets - Foam Carriers 5. Wheel full tray to depanning area (arms length reach for Operator 1) Wheel empty tray to depanning area (arms length reach for Operator 2) Foam carriersBread BasketsInsert Sheets Empty trayFull tray
3
3 Job Element Sheet Process: Cheesecake Bake – Depanning Process Author: Andreana Crance, RIT MSD Date/Revision: 2/11/10, Rev 0 6. Grab tray from rack, set on cart work surface as shown in picture below 7. Dump cake from pan onto foam holder
4
4 Job Element Sheet Process: Cheesecake Bake – Depanning Process Author: Andreana Crance, RIT MSD Date/Revision: 2/11/10, Rev 0 8. Flip cake onto permanent foam holder 9. Place cake in bread basket 10. Remove empty sheet pan from table, set another pan on table
5
5 Job Element Sheet Process: Cheesecake Bake – Depanning Process Author: Andreana Crance, RIT MSD Date/Revision: 2/11/10, Rev 0 11. When necessary; change bread basket Place sheet cover on top of cheesecakes for protection
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.