1. HazMat Technician Mod 1 Unit 6 Slide 1 Ohio Hazmat & WMD Technician Module 1 Unit 6 Control, Containment and Confinement

2. HazMat Technician Mod 1 Unit 6 Slide 2 Learning Objectives At the end of this training each student will demonstrate control, containment and confinement of various leaking containers and/or the spills they have produced.

3. HazMat Technician Mod 1 Unit 6 Slide 3 Student Performance Objectives Know the definitions of the 3 control zones Use reference resources to set up a sufficient Hot zone for a chemical incident Know the importance of confinement and containment at HazMat scenes

4. HazMat Technician Mod 1 Unit 6 Slide 4 Student Performance Objectives (cont.) Understand the difference between control, confinement and containment Explain various techniques of confinement and containment

5. HazMat Technician Mod 1 Unit 6 Slide 5 Student Performance Objectives (cont.) Identify equipment used for confinement and containment techniques Must be able to successfully complete competency evaluations 021, 022, 023, 025, 026, 027, 028, 029, 030, 031, 033, 034, 035, 036, 037, 038 and 039

6. HazMat Technician Mod 1 Unit 6 Slide 6 Introduction Prevent or minimize the release by:  Controlling  Containing  Confining

7. HazMat Technician Mod 1 Unit 6 Slide 7 Control Control Zones Fire Control Spill Control (Confinement) Leak Control (Containment)

8. HazMat Technician Mod 1 Unit 6 Slide 8 Control Zones Hot Warm Cold

9. HazMat Technician Mod 1 Unit 6 Slide 9 Fire Control Remove Ignition Source Extinguish Fires Remove Fuel Supply Remove Oxygen Source Control Burn Exposure Protection

10. HazMat Technician Mod 1 Unit 6 Slide 10 Fire Control (cont.) Preventing Container Failure  Cool Containers  Use Stress Barriers  Remove Uninvolved Materials Tactical Withdrawal Explosion Resistant Barriers

11. HazMat Technician Mod 1 Unit 6 Slide 11 Spill Control (Confinement)

12. HazMat Technician Mod 1 Unit 6 Slide 12 Confinement Air releases  Shut off valves  Vapor suppression  Dispersion  Vapor absorption (water)

13. HazMat Technician Mod 1 Unit 6 Slide 13 Confinement Releases onto land  Diversion  Diking  Retention

14. HazMat Technician Mod 1 Unit 6 Slide 14 Confinement (cont.) Releases into water  Overflow Dam  Siphon Dam  Filter fence  Floating boom

15. HazMat Technician Mod 1 Unit 6 Slide 15 Chemical Control Methods Adsorption Neutralization Solidification Dilution Dispersion Groundwater Contamination

16. HazMat Technician Mod 1 Unit 6 Slide 16 Leak Control (Containment) Tool Kit Leaks from drums Leaks from pipes Leaks from tank trucks Product Transferring Specialty tools

17. HazMat Technician Mod 1 Unit 6 Slide 17 Product Transferring Bonding and grounding

18. HazMat Technician Mod 1 Unit 6 Slide 18 Strategies and Tactics Response Objectives  Protect lives  Save property  Reduce the impact

19. HazMat Technician Mod 1 Unit 6 Slide 19 Strategy Isolation Notification Identification Protection Spill Control Leak Control Fire Control Recovery Termination

20. HazMat Technician Mod 1 Unit 6 Slide 20 Tactics Methods, procedures and techniques to complete a strategy.

21. HazMat Technician Mod 1 Unit 6 Slide 21 Unit 6 Quiz

22. HazMat Technician Mod 1 Unit 6 Slide 22 Goals and Objectives worksheet

23. HazMat Technician Mod 1 Unit 6 Slide 23 Title 49 DOT regulation Sec 173  Salvage drums  Overpacks

24. HazMat Technician Mod 1 Unit 6 Slide 24 Questions?