2. LDC borstplätering www.ldc-brushplating.com2 LDC Portable Electroplating 1.Cold process: Used at room temperature, no stress or adjustments because of termal distorsion. 2.To tolerance: Normally no machining required 3.Quick metal build-up: 0,05 mm in 10-15 min. 4.Plating: On all conductive materials, cast iron, stainless, mild steel, copper, chrome etc 5.Dense deposits: No or very little porosity in most coatings 6.Many differens metals: Nickel, Gold, Silver, Copper, Cobolt, Zinc and Alloys. 7.Excellent bonding: Molecular bonding results in very god adhesion, all coatings can be machined, grinding or polished. 8.Mobile equipment: The repair can be done on site

3. www.ldc-brushplating.com 3 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se On site repair of the crankshaft in a conversion press.

4. www.ldc-brushplating.com4 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Damaged /worn flywheel bearing areas on the crankshaft in a conversion press.

5. www.ldc-brushplating.com5 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Preparations and masking off surrounding areas.

6. www.ldc-brushplating.com 6 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Plating procedure is in progress.

7. www.ldc-brushplating.com 7 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Damaged bearing journal plated to over size and ready for grinding.

8. www.ldc-brushplating.com 8 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Crankshaft is finished and the original tolerances and measurements are obtained. Ready to assemble the flywheel.

9. www.ldc-brushplating.com 9 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Lower bed die in a conversion press with local wear damages. The damages are repaird on site.

10. www.ldc-brushplating.com 10 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Plated/repaired damage on the lower bed die. LDC-2904 copper hi-speed HB250 were used to fill the damage up. Top coated with LDC-2807 Nickel acid for wear and corrosion protection.

11. www.ldc-brushplating.com 11 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Repair on site. Lower bed die in a conversion press with local wear damages.

12. www.ldc-brushplating.com 12 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Damaged area in the lower bed die.

13. www.ldc-brushplating.com 13 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se A worn out slide. There are damages from the pistons and micro vibrations. And that cause oil to leak.

14. www.ldc-brushplating.com 14 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Damaged area inside the slide.

15. www.ldc-brushplating.com 15 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se The damages is being plated with a hard copper of 250 Brinell and grinded to original tolerances.

16. www.ldc-brushplating.com 16 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Area has now a new top coating with a nickel with a hardness of 400 brinell and also gives a excellent protection from new damages.

17. www.ldc-brushplating.com 17 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Plating is now finished and the slide is ready for assembly.

18. www.ldc-brushplating.com 18 LDC borstplätering Tele: + 46 248 174 40 E-mail: ldc@swipnet.se Oil leakage from scratched and damaged main pistons is a common problem that brush plating can solve on site.