1. EXCELERATOR ® BALL NOSE A great tool to increase your productivity!

2. BALL NOSE OVERVIEW

3. Tool bodies are available from.375 to 1.000 inch diameter. BALL NOSE OVERVIEW

4. Tool bodies are available in metric sizes from 10mm to 25mm. BALL NOSE OVERVIEW

5. Inserts are available in sizes from.375 to 1.000 in both carbide grade G-925 or ceramic grade WG-600. BALL NOSE OVERVIEW

6. Inserts are available in metric sizes from 10mm to 25mm in carbide grade G-925 or ceramic grade WG-600 ®. BALL NOSE OVERVIEW

7. Reference for starting feeds and speeds are listed in the catalog by work material and hardness. BALL NOSE OVERVIEW

8. Metric feeds and speeds are listed in the metric flyer. They will be in the metric catalog as well. BALL NOSE OVERVIEW

9. All Ball Nose End Mill steel bodies are manufactured on five-axis machines at Greenleaf's Steel Plant. BALL NOSE OVERVIEW

10. The Ball Nose inserts are manufactured at Greenleaf’s Carbide and Ceramic Insert Grinding Facility. BALL NOSE OVERVIEW

11. SUCCESS WITH THE BALL NOSE

12. TEST REPORT SUMMARY Material: Titanium 6-4 Hardness: 38 R/C Tool: SSBN-0500 Insert Grade: G-925 Iscar: 2510 RPM &.003 IPT (.075 mm/PT).05 DOC (1.27mm) Greenleaf: 3745 RPM &.003 IPT (.075 mm/ PT).05 DOC (1.27 mm) Went from 3 parts to 25 parts per edge.

13. Material: H-13 Hardness: 58-62 R/C Tool: SSBN-0500 Insert Grade: G-925 Millstar: 2500 RPM & 370 SFM (113 M/M) Greenleaf: 6000 RPM & 800 SFM (244M/M) Cut Time: From 20 minutes to 7 minutes with 3X tool life! TEST REPORT SUMMARY

14. Material: D2 Hardness: 60 r/c Tool: SSBN-1000 Insert Grade: G-925 Walter/Fette Greenleaf 5,000 RPM & 250 IPM (6300 mm/m) The finish was excellent! TEST REPORT SUMMARY

15. 5000 rpm, 250 ipm (6300 mm/m).015 doc(.38 mm)

16. Edge:RPM:DIA.:IPM:TIME:DOC:Remarks/Changes: Present: 2600.3754048mins.010.015 stepover 1. 4250.250505:41hrs.002.001 stepover 2. 6000.3751508.4 mins.010.015 stepover 3. 6000.3753001.6hrs.002.002 stepover SUMMARY:Huge success. Surface finish better, less polishing required. 5 hours saved per part. Customer bought tool, inserts. Improving throughput allowing them to keep more work in- plant. Material: 420 Stainless Steel Hardness: 28-32 R/C Tool: SSBN-0375 Insert Grade: G-925 TEST REPORT SUMMARY

17. Cost Savings Customer saved over 5 hours per part, $500! They run 3 of these parts a week, so the savings have been $1,500 per week, or $75,000 annually. The Greenleaf Ball Mill has reduced their end mill consumption dramatically, by over half. Tooling savings have amounted to over $25,000. Total savings of over $100,000!!! Thanks to Greenleaf ® Ball Mills!!

18. Material: 17-4 PH Stainless Steel Tool: SSBN-0500 Insert: G-925 5250 RPM & 688 SFM (210 M/M).025 DOC (.63 mm) Were able to use 1 insert the entire shift. Customer purchased several cutters and 100 inserts. TEST REPORT SUMMARY

19. Material: 718 Inconel Tool: SSBN-0500 Insert: G-925 3000 RPM & 393 SFM (120 M/M).025 DOC (.63mm) Cut time much better than solid tooling they were using. TEST REPORT SUMMARY

20. Ball Nose Calculator More user friendly! This new calculator is available in both English and Metric. Ask your Greenleaf ® Representative or call 1-800-458-1850 to get your copy today!

21. THANK YOU