1. Solar SSR™ Program A better understanding of Solar SSR™ Solar Building Integrated Photovoltaic (BIPV) for Standing Seam AND Exposed Fastener Roof Systems

2. Solar SSR™ Program The Solar SSR System –Total system working together to harvest power –Standing seam applications –Exposed fastener applications –System sizes –System costs –Fabral’s offering

3. Solar SSR™ Program Total System “On grid” system is shown; “Off grid” systems require battery storage between DC Disconnect and Inverter

4. Solar SSR™ Program The Total System Working together to harvest power. Triple-junction technology captures three wave lengths (red, green/yellow and blue) of sunlight Panels are electrically daisy-chained together to maximize output Power is converted from DC to AC and is returned to the grid Optional Data Acquisition System provides real-time analysis of energy production

5. Solar SSR™ Program The Solar SSR panels are: Highly flexible, lightweight and durable More efficient at producing electricity than alternative polycrystalline solar technology, especially in shadows and/or low light Efficient up to 185°F A peel and stick back The Total System

6. Solar SSR™ Program No roof penetrations to install Eliminates additional structural support requirements Maintains serviceability and walkability of the roof Roof slopes between 1:12 and 21:12 Curving is permitted Tested to very high hail and wind resistance ratings – extremely durable Extremely light weight at ±0.75 psf The Total System

7. Solar SSR™ Program Standing Seam Applications Can be applied to existing metal roofs or new standing seam panels Standing Seam panels must be at least 16” seam to seam Fabral Enduracote™ and Flurobond™ paint systems are approved Solar SSR panels are field installed – can be adhered prior or post to installing standing seam panels

8. Solar SSR™ Program Standing Seam Panel profile options Architectural/Commercial 16” or 18” Coverage Thin Seam 16” Coverage Prestige™ 16”, 18” or 20” Coverage Snap-on-Seam 16” Coverage Slim Seam Post Frame/Residential 16” Coverage 1 ½” SSR

9. Solar SSR™ Program Exposed Fastener Applications -A PATENT PENDING APPLICATION - BIVP solar thin film laminates can be adhered to hemmed flat sheets that are one foot longer than the solar panels Flat sheets are then attached over exposed fastener systems

10. Solar SSR™ Program Solar Panels on Grandrib 3 ® Note: panels shown much shorter than actual length to get all details on drawing

11. Solar SSR™ Program Solar Panels on Grandrib 3 ® PV Wires Under Ridge Cap

12. Solar SSR™ Program Transparent Drawing Showing Wires Under Ridge Cap Solar Panels on Grandrib 3 ®

13. Solar SSR™ Program Baffling Material Under Flat Plate Solar Panels on Grandrib 3 ®

14. Solar SSR™ Program System Sizes Wide range of power sizes to choose from, depending upon budget and building requirements. Standard system sizes: 1.5, 3, 5, 10, 15, 30, 60, 120 and 240 Kw The system requires approximately 600 s.f. for 3 kW

15. Solar SSR™ Program Watt = Unit of power = Volt x Amp Watt Hour = Unit of energy equal to 1 watt of power operating for one hour. 1,000 W (watt) = 1 kW (Kilowatt) Watts? 5kW system x 1hour = 5 kW-h Average 3.5-4 hours a day of 100% efficiency Average day: 5kW system x 3.8 hours = 18 kW-h / Day 18kW-h will light 7.5 100w light bulbs for 24 hours

16. Solar SSR™ Program Commercial buildings: 11.7 – 17.4 kWh per sq.ft. floor area Residential buildings: Average house uses 11,000 kWh per year 5kW system produces approximately 5,000 – 8,000 kWh per year 1.5kW – Pennsylvania2,020 kWh / yr 3kW – Virginia 4,077 kWh / yr 5kW – Washington 6,389 kWh / yr 5kW – N. Carolina 6,939 kWh / yr 5kW – N. Carolina 7,201 kWh / yr 5kW – Pennsylvania 6,753 kWh / yr 10kW – Wisconsin 12,155 kWh / yr 15kw – Wisconsin18,215 kWh / yr Typical Power Production Percentages

17. Solar SSR™ Program Other Factors Azimuth angle (direction the roof faces, SE, S, SW, etc) South or SW is often considered the best Sunlight Shade Snow cover Module/Panel Width – 15.5” PV width 16” SSR most efficient 18” – 20” SSR = wasted space Solar SSR

18. Solar SSR™ Program What Fabral Sells Fabral sells: Solar SSR panels Cable Trays Cable Tray Covers Rubber Grommets S-5! Mini Clamps Our customers must obtain the other components themselves We provide suggested manufacturers and contacts to call

19. Solar SSR™ Program System Costs Total estimated system price (less the metal roof): 3kw (rated DC, 3.264kw) ~$25,786 5kw (rated DC, 5.44kw) ~$41,344

20. Solar SSR™ Program Metal panels must be clean and smooth with no stiffening ribs, striations or embossing Thin-film solar laminate is adhered directly onto the exposed face of the SSR panel in the field or shop in temperatures between 50° and 100°F before roof installation Video available online Installation

21. Solar SSR™ Program Installation Fabral specifications clearly outline the scope of work and installation responsibilities Fabral manufactures and delivers the entire system to specification The system is installed in two steps: 1.The BIPV roofing panels by the trained roofing contractor 2.The electrical system by the electrical subcontractor

22. Solar SSR™ Program Warranty The Fabral Solar SSR system comes with a Fabral/EnergyPeak™ 25-year manufacturer’s warranty 25 Years

23. Solar SSR™ Program ROI The perfect start Can be processed via paper or online at www.fabral.com/ROI.phpwww.fabral.com/ROI.php Calculations are available for all power size options All current federal rebates, state and local incentives, utility provider incentives, renewable energy credits and depreciation are shown ROI well under 10 years is common About 7 days for results

24. Solar SSR™ Program Tax Credit Advantages 30% Solar IRS tax credit is available on PV systems - Extended through 2016 - Previous cap on residential PV systems has been REMOVED, significantly increasing the tax incentives for residential applications - Many state and local utility rebates exist PLUS don’t forget - Homeowner Energy Credit of 30% for projects using metal roofing meeting ENERGY STAR ® (cool colors) requirements - Maximum credit is $1500 - Does not include installation costs - Must be installed during 2009 or 2010

25. Solar SSR™ Program Drawings & Specifications Fabral will supply all required AutoCad drawings, electrical schematics and Masterspec® specifications for both the electrical and roofing sections Electrical schematics and specifications should be given to the electrical engineer for review

26. Solar SSR™ Program A better understanding of Solar SSR™ Solar Building Integrated Photovoltaic (BIPV) for Standing Seam AND Exposed Fastener Roof Systems