1. ROBOTICS IS THE WAVE OF THE FUTURE……

2. ARES Robotics has a perfect safety record with zero injuries and recordable incidents. Ares is the leader in ROV operations in the petrochemical industry. ARES can solve your problems and help minimize your costs Introduction to ARES Robotics, LLC ARES is the company to create solutions to your material removal and/or inspection needs. ROVs (remotely operated vehicles) for use in the petrochemical industry and has become the problem solver in the industry in material removal, inspection and remote tasking. Ability to work in any hazardous environment, Ares can perform well in all types of chemicals and vessels including carbon steel and stainless steel vessels. Top vessel entry maintenance cleaning and sludge reduction is one of our specialties. Ares has also entered into the pipeline industry and has a line of vehicles for inspection and well as cleaning oily water and sewer lines.

3. ARES ROV APPLICATIONS The use of an ARES ROV (Remotely Operated Vehicle) provides alternatives that are not limited by standard material removal methodology. In-Service Material Removal is a limitless area where robotics can perform the previously unimaginable. Cost benefits of a vessel remaining in service vs. the time and cost of removing it from service The ability to perform maintenance material reduction and volume restoration on a prescheduled basis Material Removal and Disposal opportunities never before possible without shutdown Internal Floating Roof Maintenance and Inspection without human entry of the confined space. Camera inspections of individual roof components and sealing systems Removal of pontoon lids and pumping of any liquid materials from pontoons to verify structural integrity Ability to remove fugitive material accumulated on internal roof due to seal burp or failure All functions can be easily accomplished regardless of tank condition and/or internal roof integrity Bulk Material Removal regardless of vessel conditions, integrity or internal roof height A single ROV is designed to replace and significantly outperform an entire tank cleaning crew ROVs are unaffected by Tank Conditions/Integrity, LEL Levels or IHDL Conditions Systems are fully adaptable to perform material removal under changing conditions *All functions can be easily accomplished regardless of material viscosity, density or abrasiveness in addition to Carbon Steel or Stainless Steel vessels.. Stainless Steel Tank ROV Application ROV’s can perform top vessel entry into any shaped vessel therefore there is no need for cutting on vessel for entry which maintains vessel integrity while being cost effective ROV equipment is stainless steel and compatible and will not contaminate vessel with incompatible materials ROV’s can perform maintenance cleaning and bulk material removal while the vessel is in service Can clean entire vessel with no human entry and readied for inspection or repairs

5. ARES ROV System Command Center Piloting Station ARES 4-wheel drive ROV ARES 6-wheel drive ROV Over 40 different models to perform ROV tasks and problem solving.

6. Dry CrudeCollapsed Roof Heavy Crude Product Blending Pipeline ROV Internal Floating Roof

7. TOP VESSEL ENTRY DESCRIPTION OF VESSEL Tank Configuration: External Floating Roof Tank Diameter: 212 ft 40ft high Amount of Material:Average 6-7 feet or 40,000 bbls. Type of Material: Crude Oil tank bottoms, non pumpable solids 40% wax, 12% solids, 2 to 6% water Type of Entry:Top Vessel entry and side vessel entry Roof Condition:Floating roof is slanted; one side of the roof is on its high legs @ 6 feet and the other side is at the 9 foot level being held up by suspected solids.

8. SIDE VESSEL ENTRY DESCRIPTION OF VESSEL Tank Configuration: Fixed coned roof Tank Diameter: 180 ft x 48ft high Amount of Material:1” of Residual No. 6 Oil Type of Material: Residual No. 6 Oil sludge Type of Entry:(3) side man ways Roof Condition:Good Floor:Cone down with (1) center sump, (2) gas fired steam tubes, (6) banks of steam coils Additional information: Staging area approximately 100’ (ft) by 50’ (ft) located on the side of the tank Last Cleaned: 15 years ago * Tank is being cleaned for API inspection, repair and hot work

9. INTERNAL FLOATING ROOF DESCRIPTION OF VESSEL Tank Configuration: Internal Carbon Steel Roof landed on its low legs Tank Diameter: 120 ft by 40 ft high Amount of Material:Cat gas on the roof of the IFR, unknown amount. Type of Material: Liquid Cat Gas Type of Entry:Top vessel entry via 24” top man way Roof Condition:Floating roof is set on its low legs and is flat to drive the ROV on the roof surface Floor:flat floor, no coating on floor Additional information: Remove the material from on top of the IFR and degas the vapor space Last cleaned:unknown Hazard assessment:Cat Gas present in liquid and vapors, use proper PPE. *Tank is being cleaned for inspection, repair and hot work

10. ARES CUSTOMER LIST AERA BP Amoco Brenttagg Citgo ConocoPhillips Diamond Shamrock DuPont/Invista Ethyl ExxonMobil Kinder Morgan Koch Industries LWD Field Services Lyondell Basel Lyondell Citgo MCS Technologies Motiva Marathon Petroleum Marisol Motiva Onyx PASA, Mexico Phillips Service Company Rhodia Rohm&Haas Solutia Sterling Chemicals Shell Oil Total Refining United Refinery Valero

11. THE FUTURE IS HERE……