1. Expanda Stand Carousel Display System India Distributor: Les Expressions Corporate Services Pvt. Ltd. Flat No.4, 2 ND Floor, Sapathagiri Apatments, 83, T.T.K Road, Alwarpet, Chennai – 600 018. Fax: 044-4980832. enquiry@lesexpressions.com Call Us At : 044-24988823 / 24 / 25 Fax: 044 42088823

2. Proceed for a Step By Step Installation Procedure... Carousel Brochure Display System

3. Packaging The Entire System is packed in a Box Closed Box Open Box

4. Contents 3 – Triangular spinners 2 – Metal pipes (Long& short) 1- Central connecting Hub 3 - Stoppers 1 – Branding Holder 5 - Legs

5. Hub A standard system consists of A central connecting hub...

6. Legs 5 legs to support the system...

7. Metal Pipes Two metal pipes of different sizes...

8. Stoppers Three stoppers...

9. Triangular Spinner Three spinners …

10. Branding Holder And a four way branding holder top.

11. Assembling Your Carousel Stand

12. Connecting the legs to the hub. Hold the hub and legs in the inverted position and insert the leg as shown...

13. Connecting the legs to the hub. Press down to hear the snap lock...

14. Connecting the legs to the hub. It should appear as shown. Connect the rest in the same manner...

15. Connecting the legs to the hub. In the same method connect all the five legs …

16. Connecting the legs to the hub The hub with all 5 legs assembled... Inverted View

17. Connecting the legs to the hub. Normal view The hub with all 5 legs assembled...

18. Connecting the pipes to the base. One pipe is shorter than the other. On one end of the shorter pipe there is a sleeve inside and one end of the longer pipe is tapered

19. Connecting the pipes to the base. Insert the longer pipe with a slight twist into the sleeve end of the Shorter pipe … (see the next) Shorter pipe (Sleeve End) Longer Pipe

20. Connecting the pipes to the base. Longer pipe with one end tapered … Insert the tapered end into the sleeve ringed pipe

21. Fixed Pipe With Base Insert the assembled pipes into the central hub.

22. Fixing The Stopper Insert the stopper ring through the pipe

23. Connecting the stopper to the pipe. Tighten the screw at a convenient height as desired by you.

24. Fixing The Triangular Spinner Insert the triangular spinner (Note: Position the spinner with stubs pointing upwards) through the pipe to rest on top of the stopper.

25. Fixing The Triangular Spinner. One Triangular spinner now rests where the first stopper is fixed …

26. Fixing The Triangular Spinner Fix the rest of the spinners in the same manner.

27. Fixing The Branding Holder Fix the branding holder on top end of the pipe. Branding Holder this Side Up

28. Fixing the Brochure Holders There are two clips in the Brochure Holders. Press them gently and insert the holder in the Triangular Spinners till you hear the click sound

29. Fixing the Brochure Holders. Carousel Stand with One Brochure Holder fixed on the top spinner

30. Adding More Brochure Holders Keep adding brochure holders as per your required combination on all the three triangular spinners.

31. The Fully Assembled Carousel Now your carousel is ready for use.