1. Group 11

2. Introduction Tasked to provide a “ship enclosure and adjacent building comprising one structure […] with the adjacent building running along one side of the ship”

3. Conceptual Design - #1

4. Conceptual Design - #2

5. Design Development Process

6. Final Design

7. Final design - Justification Reasons for selection: Form  Strong maritime influence Function  Exhibition space provided in conventional structure  Efficient use of space  Member spacing procures a largely transparent design

8. Structural arrangement Double-height atrium ‘Seamless’ connection between buildings No obstruction of visitor flow Ship visible throughout

9. Structural arrangement Crow’s nest experience Standalone walkway

10. Consideration of structure Limited interaction of constituent structures… …may design the three structures independently:  1. Ship enclosure  2. Adjacent building  3. Standalone walkway 1 2 3

11. Key features – Ship Enclosure Cladding support system – 2D truss network  Conventional bracing arrangement  Doubly-pinned at each end  Inclination parallel to connected 3D trusses  Connecting to outer chords

12. Key features – Ship Enclosure Primary framework – Asymmetrical 3D trusses  Pinned at foundations Fixed connectionsPinned connections

13. Key features – Ship Enclosure Primary framework – Asymmetrical 3D trusses  Prefabricated triangular space frame  Repeated Howe truss  KT gap & T joints  3D arrangement provides resistance in all load scenarios

14. Key features – Ship Enclosure Lateral restraint – Longitudinal wind loading  Symmetrical ranks of cross-bracing bays  Act to transfer wind loads on vertical facings into interior trusses

15. Key features – Ship Enclosure Lateral restraint – Transverse wind loading  Tie anchorage in the form of cable restraint  Form an architectural showpiece  Act to greatly limit lateral deflections  Assessed in a sway sensitivity analysis

16. Key Features – Crow’s nest Walkway Two access shafts 62m high 4 glass lifts, 2 stairwells Structure Props I-beams 3-D trusses

17. Key Features – Adjacent Structure Conventional arrangement Simple steel frame structure Standard beams & columns ComFlor 60 decking Lateral bracing Prevents torsion

18. Key features – Adjacent Building Load Paths

19. Prefabricated Sections - Truss Standard Sections - Column, Beam Transportation Preassemble Construction process

25. Construction Process

27. Sustainability Materials Solar panels Triple Glazing Reflective Coating on Glass Natural Lighting Rainwater Harvesting

28. Any Questions?