1. ME260 Mechanical Engineering Design II Instructor notes

2. Definition of Design Many available definitions One definition: Design is the process of inventing artifacts that display a new physical order, organization, and form in response to function Another definition: Design is a conscious effort directed towards the ordering of the functional, material, and visual requirements of a problem

3. Design Example Problem: Build a tool/device that is capable of opening metal cans Design Response: Regular, manual can opener Manual safe-operation can opener Electric safe can opener

4. Principles of Design Balance Rhythm Proportion/Scale Emphasis Harmony Apply to design in general but not necessarily all important to “mechanical design” Also, some of these involve aesthetics which may or may not be important from a mechanical point of view

5. Important/Often Encountered Mechanical Design Principles Balance Proportion/Scale Physical balance often involving geometric symmetry Pertains to ergonomics (the study of human factors in design) Size of door and inside space must accommodate people/merchandise to be elevated. Also, location of buttons must be convenient

6. Important/Often Encountered Mechanical Design Principles Harmony Integration of components in a system to work seamlessly together This pertains to Design for Assembly (DFA) concepts, i.e. the ease with which one can assemble and disassemble parts

7. Design Guidelines Functional Requirements Material/Manufacturing/Cost Requirements Visual Requirements

8. Design Guidelines Functional Requirements A can/bottle opener must be able to open cans/bottles, otherwise it is a dysfunctional can/bottle opener

9. Design Guidelines Material/Manufacturing/Cost Requirements More material used in a design means more cost More material normally means stronger design (i.e. less chance of breaking/failure) More material also normally means higher manufacturing cost The type of material also affects both cost and likelihood of failure. It affects performance in general More material/manufacturing also typically means more environmental pollution Finally, the material for your part should be amenable to manufacturing techniques/processes available to you Dilemma

10. Design Guidelines Material/Manufacturing/Cost Requirements Examples: 1- You can not create a perfect 2- A bigger diameter car axle is less likely to break but costs more 3- A car axle made from diamond is both prohibitive in cost as well as can easily fracture/break, i.e. is not tough to withstand a hit. Steel, however, is a good choice material here This pertains to Design for Manufacture (DFM) concepts, i.e. the design process needs to integrate manufacturing feasibility into it An example of CAD (Computer-Aided Design)

11. Design Guidelines Visual Requirements Many times you want your product to be either: 1- Appealing to the human eye for marketability 2- Of certain color to serve a certain purpose Example 1: Car manufacturers compete to make visually appealing cars Example 2: Protective coats/pants for firefighters are typically made of heat reflective colors, not black for example.

12. Mechanical Properties of Materials Force is not an objective measure of loading Stress =  = Force/Area ( F/A o ) is Why? To answer this answer first: If a force of 1 lb is applied to a rubber band and a force of 100 lb is applied to another, which rubber band will break first? Answer: depends on their cross-sectional area, i.e. the stress that they are subjected to F F Area = A o lolo F F Area = A l (left) Before deformation, and (right) after deformation

13. Mechanical Properties of Materials Deformation is simply change in dimensions or geometry/shape of a material under loading The change in length,  l =l – l o is not an objective measure of deformation. This is positive change if material is loaded in tension and negative change if loaded in compression. Strain (the relative change in length) = e =  l / l o is. Strain sometimes is expressed as a percentage, i.e. as 100×  l / l o. If a rubber band is extended by 1 cm and another by 1 m, which one will break first? Answer: depends on how much they stretched (  l ) relative/compared to their original length ( l o ), i.e. depends on how much they strained. F F Area = A o lolo F F Area = A l (left) Before deformation, and (right) after deformation

14. Mechanical Properties of Materials