1. Virtual water The water footprint of a country is defined as the volume of water used for the production of the goods and services consumed by the inhabitants of the country. Study shows that both Morocco and the Netherlands import more water in virtual form (in the form of water-intensive agricultural commodities) than they export, which makes them dependent on water resources elsewhere in the world. Hoekstra & Chapagain - Ecological Economics (2007) 143–151.

2. Coal-fired power plants - Desulphurization of a solid Sulfur in coal is either organic (usually about 60%) or inorganic (about 40%). The inorganic form is iron pyrite (FeS 2 ) which has a higher density than coal. From grinded coal it is removed by elutriation or flotation. The removal of organic sulfur requires a chemical reaction that is accomplished best if the coal is gasified first. Gasified coal is like natural gas. Separation according to decreasing fall velocity Principle of an elutriator

3. Lake Bourget, summer 2007

4. Source: SACYTOX (2004) Prototype de Système d'alerte pour les proliférations de cyanobactéries toxiques dans les lacs. Rapport Sogreah-Cereve, France. Monitoring of biomass development of toxic alga Planktothrix rubescens (a cyanobacteria) in Lake Bourget in 2002-2003.

5. The methods of iron and manganese removal from water consist of transforming the dissolved forms (Fe 2+ and Mn 2+ ) by oxidation, into precipitates (Fe(OH) 3 and MnO 2 ) followed by filtration. Oxidation can be carried out using powerful chemical oxidants like oxygen, chlorine, chlorine dioxide, ozone or potassium permanganate.

6. low busy street mediumhighway μg / g PAH contamination of fine particles : Streets and traffic

7. We start from the simple case of a chemostat which is a continuous stirred-tank reactor (CSTR). For the moment we do not consider reinjecting the newly produced biomass, back into the bioreactor, after liquid-solid separation. In that case the biomass budget simply reads:

10. To reach good nitrification rates, it is necessary to work at a low F/M ratio. The biomass concentration thus needs to be higher than in the conventional process. These requirements have consequences regarding the subsequent sludge manipulation options and disposal routes.

12. Ammonia stripping Two-step physical-chemical method Step 1: Raise pH to 10.5-11.5 – convert ammonium ions to ammonia gas Step 2: Air-strip – cascade wastewater countercurrent to air flow – ammonia gas escapes to atmosphere Pro: less costly, no sludge or Cl by-products Cons: acids/bases, scale, freezing problems

14. Continuous Belt Filter Presses designed to work continuously, but apparently suffer from frequent troubleshooting & work interruptions anyway (not an optimal solution). If the purpose is to operate continuously, presumably centrifuge separators would form a better choice.

15. Hierarchy Prevention Quantity Quality – environmental impact Re-use Recycle Material recovery Composting – Organical treatment Incineration with energy recovery Incineration without energy recovery Landfilling Mercury-free neon tubes

17. multiple hearth furnace

19. Controlled landfill – Class II

20. Dedicated collection vehicles Sorting of household waste

23. Average Recent evolution of the LCV (lower calorific value) of municipal solid wastes accepted at Brussels-Energy combustion plant (kcal / kg) 1996 - 2012 Reminder: 9.0 MJ / kg on this diagram would read 2150 kcal / kg In terms of energy recovery, in the Brussels agglomeration, more and more heat value is presently lost to blue and yellow bags (selective collection of sorted municipal solid wastes) which are not reaching the combustion unit any longer.

25. Magnet separators

26. After removal of the ferromagnetic metals, other metals such as Aluminum and Copper can be separated as well. Eddy currents arise when there is relative motion between a conductor and a magnet. The illustrated configuration is a rotor generating a magnetic field with alternating polarity. The repelling force created by the eddy currents moves Al and Cu metals away from the conveyor, while all the other (non-electrically conductive) materials simply drop off by gravity at the end of the conveyor. Separation and recovery of Aluminum using magnetic eddy currents

27. metallic contamination of the slags, ESP and FGD residues

28. SO 2 Environmental monitoring of Brussels-Energy Incinerator (mg/Nm³ dry 11% O 2 )