Presentation is loading. Please wait.

Presentation is loading. Please wait.

Boost All / Buff All. Boost All – What Does It Do?  Alkaline Builders The pH is 10. This increases the pH of some cleaning agents and helps stabilize.

Similar presentations


Presentation on theme: "Boost All / Buff All. Boost All – What Does It Do?  Alkaline Builders The pH is 10. This increases the pH of some cleaning agents and helps stabilize."— Presentation transcript:

1 Boost All / Buff All

2

3 Boost All – What Does It Do?  Alkaline Builders The pH is 10. This increases the pH of some cleaning agents and helps stabilize the pH of others. Alkalinity is needed to emulsify oils and greases from petroleum and food sources. Caution - High alkalinity on wool increases the possibility of dye bleed.

4 Boost All – What Does It Do?  Color Safe Oxygen Bleach Boost All is an oxidizing bleach. Whitens whites (and off-whites). This makes it great for olefin Berbers! Brightens colors – Greens, Blues, Reds; less so with neutral colors like gray or brown.

5 Boost All – How To Use It  Add from ¼ ounce to 2 ounces per gallon of water. Dissolve in hot water and then add to cleaning solution. Must be fresh to work. If not used in a few hours, you can add more later. If added to Hydroforce with dilution at 8:1, just add 8 times the normal amount.

6 Boost All – Super Cleaning / Whitening / Brightening Formula  Fringes of Oriental rugs Add to 1 gallon of warm water  1 ounce Boost All  2 Ounces Buff All  4 ounces Bridgepoint Fabric Shampoo  Work into fringes using horsehair brush or Handi Groomer The natural color of cotton is not pure white. Potential weakening of cotton fibers if used without Buff All

7 Boost All – Other Uses  Brighten dingy traffic lanes  Removes some water marks  Corrects some browning

8 Boost All - Warnings  Don’t mix with strong acids  Don’t mix with other types of bleach or anything containing chlorine.

9 Buff All – What Is It?  A salt that becomes an acid when dissolved in water  Has a pH of 4 when used as directed. Used to lower pH of some cleaning agents, allowing them to be used on sensitive fibers  When you want the benefits of Boost All without the higher pH

10 Buff All – How to Use It  For Haitian cotton, natural upholstery fabrics with existing browning or likely to brown –  For each gallon of hot water add 1 ounce of Boost All 2 ounces of Buff All 4 Ounces of Fabric Shampoo

11 Buff All – How to Use It  Brush in and agitate with horsehair brush  Extract using Fab-Set in rinse water (4 -12 ounces per gallon).  Dry with Air movers.

12 Buff All – More Uses  Oriental rug Fringes – Use the Boost All / Buff All / Fabric Shampoo formula. Scrub into the fringes Allow 10 minutes dwell time Rinse with Fab-Set in the rinse water.


Download ppt "Boost All / Buff All. Boost All – What Does It Do?  Alkaline Builders The pH is 10. This increases the pH of some cleaning agents and helps stabilize."

Similar presentations


Ads by Google