1. Lecture Arson Analysis of Fire Debris Arson is defined as purposely setting fire to a house, building or other property.

2. 1997 Arson Statistics Arson is the second leading cause of death by fire in the U.S. An estimated 500 Americans died in arson- related fires. Arson caused more than $2 billion in property damage. Only 19% of arson cases resulted in arrest, and only 2% were convicted. 50% of arsonists are under the age of 20 (40% are under 15 years old). Arson is the second leading cause of death by fire in the U.S. An estimated 500 Americans died in arson- related fires. Arson caused more than $2 billion in property damage. Only 19% of arson cases resulted in arrest, and only 2% were convicted. 50% of arsonists are under the age of 20 (40% are under 15 years old). Rules of a Fire’s Origin The fire burns up and out (v- pattern). The presence of a combustible material is needed. The fire needs fuel and oxygen to continue. The fire’s spread will be influenced by air currents, walls and stairways. The fire burns up and out (v- pattern). The presence of a combustible material is needed. The fire needs fuel and oxygen to continue. The fire’s spread will be influenced by air currents, walls and stairways.

4. Arson Investigation Ignition temperature. Combustion will continue until: 1.Fuels are consumed. 2.Oxidizing agent has been removed. 3.Fuels are cooled below their ignition temperature. 4.Flames are chemically retarded. Transfer of heat. : Conduction. Convection. Radiation. Direct flame contact. Ignition temperature. Combustion will continue until: 1.Fuels are consumed. 2.Oxidizing agent has been removed. 3.Fuels are cooled below their ignition temperature. 4.Flames are chemically retarded. Transfer of heat. : Conduction. Convection. Radiation. Direct flame contact.

5. Arson Investigation Definitions. Flammable liquid. Combustible liquid. Flammable. Flammable or explosive limits. Vapor density. Definitions. Flammable liquid. Combustible liquid. Flammable. Flammable or explosive limits. Vapor density. Ignition temperature and flash points are NOT related! LiquidFlash Point Ignition Temp Gasoline-45 o F536 o F to 853 o F Kerosene100 o F410 o F

6. Flash point - The temperature at which a particular flammable liquid gives off vapors (vaporizes) and therefore can ignite. The ignition temperature is the temperature required for a liquid to continue to emit vapors that can sustain combustion. A flammable liquid in its liquid state will not burn. It only will ignite when it vaporizes into a gaseous state. All flammable liquids give off vapors that can ignite and burn when an ignition source such as a lighted cigarette or spark is present. Flash point - The temperature at which a particular flammable liquid gives off vapors (vaporizes) and therefore can ignite. The ignition temperature is the temperature required for a liquid to continue to emit vapors that can sustain combustion. A flammable liquid in its liquid state will not burn. It only will ignite when it vaporizes into a gaseous state. All flammable liquids give off vapors that can ignite and burn when an ignition source such as a lighted cigarette or spark is present.

7. Point of Origin (POO). Defined as where the fire originated. Cause of fire may be near the POO. Fire usually burns longer at POO. If accelerants or ignition devices used, they may be present at the POO. Multiple POO’s MAY indicate arson. “V” patterns usually point to the POO. Extensive ceiling damages may be present above the POO. Point of Origin (POO). Defined as where the fire originated. Cause of fire may be near the POO. Fire usually burns longer at POO. If accelerants or ignition devices used, they may be present at the POO. Multiple POO’s MAY indicate arson. “V” patterns usually point to the POO. Extensive ceiling damages may be present above the POO. Point of Origin (POO). Arson Investigation Interior Examination. Work backward in relation to fire travel and from least to most damage. Ceiling damage may lead to POO. In accidental fires, floor damage is limited in respect to the ceiling damage. “V” patterns may help locate POO. Interior Examination. Work backward in relation to fire travel and from least to most damage. Ceiling damage may lead to POO. In accidental fires, floor damage is limited in respect to the ceiling damage. “V” patterns may help locate POO.

8. Arson Investigation

9. Investigation of Vehicle Fires. Vehicular fires are investigated just as structural fires. Accidental fires tend to be isolated to one area of the vehicle. Incendiary fires tend to consume the entire vehicle and are very hot. The loss of temper of the seat strings may be observed. Investigation of Vehicle Fires. Vehicular fires are investigated just as structural fires. Accidental fires tend to be isolated to one area of the vehicle. Incendiary fires tend to consume the entire vehicle and are very hot. The loss of temper of the seat strings may be observed.

10. Accelerants Accelerants are any liquid, solid or gaseous material that will sustain or enhance flammability. Liquid materials are commonly used because of ease of ignition and familiarity of use. Accelerants are nearly exclusively derived from hydrocarbons. Straight chain hydrocarbons are the backbone of the oil industry. Hydrocarbons are molecules made up of the elements hydrogen and carbon. Octane is a term familiar to all. It consists of a hydrocarbon having 8 carbons. Accelerants are any liquid, solid or gaseous material that will sustain or enhance flammability. Liquid materials are commonly used because of ease of ignition and familiarity of use. Accelerants are nearly exclusively derived from hydrocarbons. Straight chain hydrocarbons are the backbone of the oil industry. Hydrocarbons are molecules made up of the elements hydrogen and carbon. Octane is a term familiar to all. It consists of a hydrocarbon having 8 carbons. Examples: Gasoline Kerosene Diesel Lighter fluids Charcoal starters Automobile additives Camping fuels

11. Classification of Accelerants 1. Light petroleum distillates (LPD) 2. Gasoline 3. Medium petroleum distillates (MPD) 4. Kerosene 5. Heavy petroleum distillates (HPD) 6. Miscellaneous 1. Light petroleum distillates (LPD) 2. Gasoline 3. Medium petroleum distillates (MPD) 4. Kerosene 5. Heavy petroleum distillates (HPD) 6. Miscellaneous

12. Light petroleum distillates (1) Produced by distilling crude oil. Made from the C 4 through C 11 range of hydrocarbons. Class representatives: petroleum ether, cigarette lighter fluid, some camping fuels and solvents. Produced by distilling crude oil. Made from the C 4 through C 11 range of hydrocarbons. Class representatives: petroleum ether, cigarette lighter fluid, some camping fuels and solvents. Gasoline (2) A refined petroleum mixture of the C4 through C12 range. Produced from crude oil using the ‘cracking and reforming’ production method. All brands and grades of automotive gasoline fit within this category. A refined petroleum mixture of the C4 through C12 range. Produced from crude oil using the ‘cracking and reforming’ production method. All brands and grades of automotive gasoline fit within this category.

13. Medium Petroleum Distillates (3) Produced by distilling crude oil. Made from the C 8 through C 12 range of hydrocarbons. Class representatives: paint thinners, mineral spirits, dry cleaning solvents and charcoal starter containing mineral spirits. Produced by distilling crude oil. Made from the C 8 through C 12 range of hydrocarbons. Class representatives: paint thinners, mineral spirits, dry cleaning solvents and charcoal starter containing mineral spirits. Kerosene (4) Produced by distilling crude oil. Made from the C 9 through C 16 range of hydrocarbons. Class representatives: kerosene, jet fuel, and lamp oils. Produced by distilling crude oil. Made from the C 9 through C 16 range of hydrocarbons. Class representatives: kerosene, jet fuel, and lamp oils.

14. Heavy Petroleum Distillates (5) Produced by distilling crude oil. Made from the C10 through C23 range of hydrocarbons. Class representatives: diesel, lamp oils and home heating oils. Produced by distilling crude oil. Made from the C10 through C23 range of hydrocarbons. Class representatives: diesel, lamp oils and home heating oils. Miscellaneous (6) Produced by collecting and recombining certain fractions of distilled crude oil. Made from a wide range of hydrocarbons. Class representatives: brush cleaners, thinning agents, strippers, products for home, automotive and industrial use. Produced by collecting and recombining certain fractions of distilled crude oil. Made from a wide range of hydrocarbons. Class representatives: brush cleaners, thinning agents, strippers, products for home, automotive and industrial use.

15. Evidence of Accelerants Large amounts of damage Unusual burn patterns High heat stress Multiple sites of origin “Sniffers” Portable gas chromatographs Chemical tests Canines Portable detectors Detect change in oxygen level on a semiconductor Guides to the best place to collect samples Large amounts of damage Unusual burn patterns High heat stress Multiple sites of origin “Sniffers” Portable gas chromatographs Chemical tests Canines Portable detectors Detect change in oxygen level on a semiconductor Guides to the best place to collect samples Dogs can detect 0.01  L of 50% evaporated gasoline 100% of the time. 0.01  L is about the size of a thousandth of a drop. Dogs can detect 0.01  L of 50% evaporated gasoline 100% of the time. 0.01  L is about the size of a thousandth of a drop.

16. Steps to Recover and Identify Accelerants Collect samples. Extract the fire debris and obtain a sample for instrumental analysis. Carry out instrumental analysis. Interpret the results. Collect samples. Extract the fire debris and obtain a sample for instrumental analysis. Carry out instrumental analysis. Interpret the results. Evidence Containers The evidence container should have the following qualities: Air tight Highly resistant to breakage Prevents cross- contamination Good integrity seal The evidence container should have the following qualities: Air tight Highly resistant to breakage Prevents cross- contamination Good integrity seal

17. Collection of Evidence Begin the search by looking for objects that do not seem to belong. Concentrate the search beginning where the suspected accelerant container was found. Store the samples in containers where they will not be contaminated. Begin the search by looking for objects that do not seem to belong. Concentrate the search beginning where the suspected accelerant container was found. Store the samples in containers where they will not be contaminated. Common Sampling Errors Insufficient sample Taking samples from the wrong places or materials Ineffective sample preservation techniques No comparison samples Not maintaining an evidence “chain of custody” Insufficient sample Taking samples from the wrong places or materials Ineffective sample preservation techniques No comparison samples Not maintaining an evidence “chain of custody”

18. Accelerant Identification Identification consists of three steps: Sample preparation Instrumental analysis Data analysis Identification consists of three steps: Sample preparation Instrumental analysis Data analysis

19. Extraction Common methods used today: Steam distillation Vacuum distillation Solvent extraction Charcoal sampling Swept headspace. The can containing the debris is first identified by a unique case and item number A hole is punched in the lid. A rubber plug containing two carbon sampling strips are inserted into the can. The can with the sampling strips is put into the oven and heated. After heating, the carbon strips are put in separate glass vials. One strip is sealed dry and is stored for re-testing purposes, if necessary. The other is placed in carbon disulfide, a solvent. Common methods used today: Steam distillation Vacuum distillation Solvent extraction Charcoal sampling Swept headspace. The can containing the debris is first identified by a unique case and item number A hole is punched in the lid. A rubber plug containing two carbon sampling strips are inserted into the can. The can with the sampling strips is put into the oven and heated. After heating, the carbon strips are put in separate glass vials. One strip is sealed dry and is stored for re-testing purposes, if necessary. The other is placed in carbon disulfide, a solvent.

20. Analysis The vial is automatically injected on the gas chromatograph / mass selective detector (GC/MSD). The GC will separate all of the sample’s components. The MSD will identify the sample’s components. The vial is automatically injected on the gas chromatograph / mass selective detector (GC/MSD). The GC will separate all of the sample’s components. The MSD will identify the sample’s components. A gas chromatograph is coupled to a mass selective detector.

22. An Ignitable Liquid Is Detected “Sample contains a medium petroleum distillate (MPD), some examples are paint thinners and mineral spirits”. “Sample contains a mixture of gasoline and a heavy petroleum distillate (HPD). Some examples of a HPD are diesel fuels and heating oils.” “Sample contains a medium petroleum distillate (MPD), some examples are paint thinners and mineral spirits”. “Sample contains a mixture of gasoline and a heavy petroleum distillate (HPD). Some examples of a HPD are diesel fuels and heating oils.” No Ignitable Liquids Were Detected We can look at this in four different ways... No ignitable liquids were ever used Ignitable liquids were used to start the fire, but have been totally consumed. Ignitable liquids are still present; however, not in the collected sample. Ignitable liquids are still present in the collected sample; however, they are too dilute to be detected. We can look at this in four different ways... No ignitable liquids were ever used Ignitable liquids were used to start the fire, but have been totally consumed. Ignitable liquids are still present; however, not in the collected sample. Ignitable liquids are still present in the collected sample; however, they are too dilute to be detected.