1. ALUMINIUM EXTRUDED PROFILES Schimmer Metal Standard Company Limited Factory : 1/4 Moo 7 T. Banthew A. Sena Ayutthaya 13110 Thailand Tel: +66 (0) 3537-5078 / 83Fax: +66 (0) 3537-5084 Office : 1070/4-6 Phaholyothin road, Ladyao, Jatrujak, Bangkok 10900 Thailand Tel: +66 (0) 2617-6025 / 28Fax: +66 (0) 2272-1546 Website: www.schimmermetal.com E-mail: info@schimmermetal.com Published by Schimmer Metal Standard Co., Ltd. Published Year: 2004 All Rights Reserved

2. Table of Contents Page 2 Page 1. Thailand Industrial Standard 3 2. Chemical Composition Limits 4 3. Terms & Definition of Aluminium Extrusion 5 4. Cross-sectional Dimension Tolerances 7 5. Hardness and Mechanical Properties 8 6. Shopfront & Doors 9 7. Sliding Doors & Windows 28 8. Tee Bar 43 9. Fly Screen 44 10. Spandral 45 11. Transportation 46 12. Sunshade 48 13. Curtain Walls 53 14. Casement Doors & Windows 56 15. Round Bars 60 16. Square Bars 61 17. Flat Bars 62 18. Equal Angles 64 19. Unequal Angles 66 20. Unequal Channel 67 21. Square Tubes 68 22. Rectangular Tubes 70 23. Round Tubes 73

3. THAILAND INDUSTRIAL STANDARD Page 3

4. CHEMICAL COMPOSITION LIMITS Page 4

5. FAs fabricated. Applies to wrought products that acquire some temper from shaping processes in which no special control is exercised over the amount of strain hardening or thermal treatment. For wrought products in this temper, there are no mechanical -property limits. Applies to castings in the as-cast condition if the alloy is also regularly produced in heat treated tempers. OAnnealed (wrought products only). Applies to the softest temper of wrought products. WSolution heat treated. An unstable temper applicable only to alloys that age at room temperature after solution heat treatment. This designation is specific only when the period of natural aging is indicated; for example: W(0.5) hr). T9 Sa THeat treated to produce stable tempers other than F or O. Applies to wrought and cast products that are heat treated, with or without supplementary cold working to produce stable tempers.TheT is always followed by one or more digits. Numerals 1 through 10 indicate specific sequences of treatments: T1Naturally aged to a substantially stable condition. Applies to products in which partial solution of alloying elements is provided by elevated-temperature, rapid-cool fabrication. T2Annealed (cast products only) Designates a temper produced by a type of annealing treatment used to improve ductility and increase dimensional stability of castings. T3Solution heat treated, cold-worked, and naturally aged to a substantially stable condition. Applies to products that are cold worked to improve strength, or in which the effect of cold work associated with flattening or straightening is recognized in applicable specifications. Different amounts of cold work are denoted by a second digit. T4Solution heat treated and naturally aged to a substantially stable condition. Applies to products that are not cold worked after solution heat treatment, or in which the effect of cold work associated with flattening or straightening may not be recognized in applicable specifications. T5Artificially aged only. Applies to products that are artificially aged after an elevated-temperature, rapid-cool fabrication process, such as casting or extrusion, to improve strength and/or dimensional stability. T6Solution heat treated and artificially aged. Applies to products not cold worked after solution heat treatment, or in which the effect of cold work associated with flattening or straightening may not be recognized in applicable specifications. T7Solution heat treated and overaged. Applies to products that are solution heat treated and artificially aged beyond the condition of maximum strength, to provide controlled special characteristics, such as dimensional stability, lower residual stresses, or improved resistance to corrosion. Page 5 TEMPER DEFINITIONS

6. T8Solution heat treated, cold worked, and artificially aged. Applies to products that are cold worked to improve strength, or in which the effect of cold work associated with flattening or straightening is recognized in applicable specifications. Different amounts of cold work are denoted by a second digit. T9Solution heat treated, artificially aged, and cold worked. Applies to products that are cold worked as a final operation, to improve strength. T10Artificially aged and cold worked. Applies to products that are artificially aged after an elevated-temperature, rapid cool fabrication process, such as casting or extrusion, and then cold worked to improve strength. Page 6 TEMPER DEFINITIONS

7. CROSS-SECTIONAL DIMENSION TOLERANCES Page 7

8. HARDNESS vs. MECHANICAL PROPERTIES Page 8

9. SHOPFRONTS & DOORS Page 9

10. A B T Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 13100101.60 44.45 < 1.0 1.0 1.1 1.2 1.3 1.4 1.5 1.75 2.0 2.3 0.546 0.625 0.687 0.718 0.781 0.828 0.906 1.046 1.156 1.281 SHOPFRONTS & DOORS Page 10

11. Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 13101101.60 44.45 < 1.0 1.0 1.1 1.2 1.3 1.4 1.5 1.75 2.0 2.3 0.656 0.781 0.844 0.937 1.003 1.031 1.141 1.297 1.484 1.625 A B T Page 11 SHOPFRONTS & DOORS

12. Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 13102101.60 44.45 < 1.0 1.0 1.1 1.2 1.3 1.4 1.5 1.75 2.0 2.3 0.625 0.672 0.734 0.813 0.844 0.875 0.938 1.094 1.250 1.410 A B T Page 12 SHOPFRONTS & DOORS

13. T A B Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1310344.45 18.10 < 1.0 1.0 1.1 1.2 1.3 1.4 1.5 1.75 0.250 0.282 0.313 0.328 0.344 0.391 0.406 0.438 Page 13 SHOPFRONTS & DOORS

14. T A B Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1310483.20 15.60 < 1.0 1.0 1.1 1.2 1.5 1.75 0.344 0.406 0.453 0.516 0.578 0.640 Page 14 SHOPFRONTS & DOORS

15. Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1310583.20 5.75 < 1.0 1.0 1.1 1.2 1.5 2.0 0.234 0.265 0.297 0.328 0.391 0.515 T A B Page 15 SHOPFRONTS & DOORS

16. A B T Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 13106101.60 42.95 1.0 1.2 1.3 1.4 1.5 1.75 2.0 0.609 0.715 0.733 0.855 0.940 1.011 1.187 Page 16 SHOPFRONTS & DOORS

17. T A B Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 13107101.60 2.80 1.2 1.3 1.5 1.75 2.0 0.337 0.391 0.475 0.516 0.578 Page 17 SHOPFRONTS & DOORS

18. Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1310854.00 46.00 1.0 1.2 1.4 1.5 1.75 2.0 2.3 2.75 0.656 0.703 0.765 0.844 0.938 1.125 1.250 1.391 T A B Page 18 SHOPFRONTS & DOORS

19. T A B Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S1310944.00 51.00 1.2 1.3 1.4 1.5 1.75 2.0 2.3 0.656 0.719 0.797 0.844 0.906 1.125 1.219 Page 19 SHOPFRONTS & DOORS

20. T A B Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1311044.00 80.00 1.2 1.3 1.4 1.5 1.75 2.0 2.3 0.828 0.890 0.938 1.016 1.141 1.375 1.562 Page 20 SHOPFRONTS & DOORS

21. S13321 Weight = 1.094 kg / m. S13328 Weight = 1.090 kg / m. 101.6 44.45 1.5 1.8 101.6 44.45 Page 21 SHOPFRONTS & DOORS

22. 15.0 39.83 15.0 39.83 15.0 16.425 15.0 16.425 0.8 1.0 S13114A Weight = 0.100 kg / m. S13114B Weight = 0.111 kg / m. 0.8 1.0 S13113A Weight = 0.168 kg / m. S13113B Weight = 0.170 kg / m. 15.0 15.8 0.8 S13116 Weight = 0.098 kg / m. S13115 Weight = 0.140 kg / m. 15.0 39.55 S13111 Weight = 0.096 kg / m. 0.8 14.7 17.4 S13323 Weight = 0.250 kg / m. 39.3 15.0 1.2 Page 22 SHOPFRONTS & DOORS

23. 101.8 1.5 S13216 Weight = 1.154 kgs. / m. S13215 Weight = 1.882 kgs. / m. 101.6 1.7 Page 23 SHOPFRONTS & DOORS

24. 44.0 25.3 1.0 S13118 Weight = 0.435 kgs. / m. 44.0 S13119 Weight = 0.413 kgs. / m. 1.0 19.05 Page 24 SHOPFRONTS & DOORS

25. 95.0 12.02.2 S13213 Weight = 0.792 kgs. / m. 95.0 12.03.0 S13403 Weight = 1.116 kgs. / m. 146.05 12.0 3.0 S13404 Weight = 1.393 kgs. / m. Page 25 SHOPFRONTS & DOORS

26. 101.6 13.0 101.6 12.0 S13212 Weight = 0.925 kgs. / m. S13112 Weight = 0.650 kgs. / m. 2.0 1.7 Page 26 SHOPFRONTS & DOORS

27. 87.5 43.5 3.8 S13500 Weight = 2.765 kgs. / m. S13121 Weight = 1.907 kgs. / m. 29.4 50.0 Page 27 SHOPFRONTS & DOORS

28. Page 28 SLIDING DOORS & WINDOWS

29. T A B Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1620095.00 22.22 < 1.0 1.0 1.2 1.3 1.5 1.8 0.450 0.490 0.558 0.637 0.738 0.865 SLIDING DOORS & WINDOWS Page 29

30. T A B Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1620195.00 26.00 26.00 < 1.0 1.0 1.1 1.2 1.3 1.5 1.8 0.400 0.578 0.676 0.785 0.809 0.897 1.065 Page 30 SLIDING DOORS & WINDOWS

31. T A B Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1620295.00 19.00 < 1.0 1.0 1.2 1.3 1.5 1.8 0.390 0.490 0.588 0.637 0.738 0.865 Page 31 SLIDING DOORS & WINDOWS

32. A B T Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1620350.00 26.00 < 1.0 1.0 1.2 1.3 1.5 1.8 0.422 0.470 0.560 0.604 0.709 0.819 Page 32 SLIDING DOORS & WINDOWS

33. A B T Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1620433.15 26.0 < 1.0 1.0 1.2 1.5 0.345 0.392 0.423 0.561 Page 33 SLIDING DOORS & WINDOWS

34. A B T Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1620534.40 32.15 < 1.0 1.0 1.2 1.3 1.5 1.8 0.400 0.484 0.587 0.623 0.693 0.835 Page 34 SLIDING DOORS & WINDOWS

35. Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1620635.0 26.8 < 1.0 1.0 1.2 1.3 1.5 1.8 SLIDING DOORS & WINDOWS Page 35

36. Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1620760.0 24.4 < 1.0 1.0 1.2 1.3 1.5 1.8 SLIDING DOORS & WINDOWS Page 36

37. A B T Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1620850.50 12.20 < 1.0 1.0 1.2 1.3 0.171 0.183 0.210 0.220 Page 37 SLIDING DOORS & WINDOWS

38. A B T Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1620938.1 16.4 1.0 1.2 0.197 0.274 Page 38 SLIDING DOORS & WINDOWS

39. Die No.A (mm.) B (mm.) T (mm.) Weight (kg/m.) S 1621142.70 42.7 12.60 12.6 < 1.0 1.0 1.2 1.3 0.295 0.310 0.371 0.393 A B T Page 39 SLIDING DOORS & WINDOWS

40. S16310 Weight = 0.910 kgs. / m. S16311 Weight = 1.100 kgs. / m. 1.5 95.0 22.0 32.0 95.0 1.5 S16830 Weight = 1.100 kgs. / m. 44.45 95.0 1.5 S16831 Weight = 0.900 kgs. / m. 27.3 95.0 1.5 Page 40 SLIDING DOORS & WINDOWS

41. S16213 Weight = 0.160 kgs. / m. S16312 Weight = 0.720 kgs. / m. S16313 Weight = 0.680 kgs. / m. 17.8 15.8 1.5 50.0 34.0 34.5 32.25 1.5 1.2 31.8 22.0 S16210 Weight = 0.416 kgs. / m. 36.2 1.5 48.0 S13217 Weight = 0.640 kgs. / m. Page 41 SLIDING DOORS & WINDOWS

42. 1.2 S16011 Weight = 0.491 kgs. / m. 71.5 19.8 S16010 Weight = 0.445 kgs. / m. 1.2 71.5 18.11 71.5 26.8 1.2 S16012 Weight = 0.664 kgs. / m. S16013 Weight = 0.683 kgs. / m. 71.5 22.7 1.2 Page 42 SLIDING DOORS & WINDOWS

43. S16000 Weight = 0.370 kgs. / m. 0.8 71.5 18.10 71.5 26.8 0.8 S16002 Weight = 0.540 kgs. / m. S16820 Weight = 0.708 kgs. / m. S16822 Weight = 0.483 kgs. / m. S16832 Weight = 0.423 kgs. / m. S16821 Weight = 0.664 kgs. / m. 33.0 69.80 1.2 Page 43 SLIDING DOORS & WINDOWS

44. S16824 Weight = 0.490 kgs. / m. 32.7 35.0 S16825 Weight = 0.360 kgs. / m. S16828 Weight = 0.490 kgs. / m. S16829 Weight = 0.103 kgs. / m. S16827 Weight = 0.349 kgs. / m. 1.2 Page 44 SLIDING DOORS & WINDOWS

45. 38.1 25.4 S14101 Weight = 0.204 kgs. / m. 1.2 CEILING TEE Page 45

46. FLY SCREEN S15102 Weight = 0.125 kgs. / m. S15100 Weight = 0.175 kgs. / m. Page 46

47. SPANDRAL S17100 Weight = 0.318 kgs. / m. S17104 Weight = 0.348 kgs. / m. Page 47

48. TRANSPORTATION 130.8 2.3 30.8 S20000 Weight = 2.179 kgs. / m. S20001 Weight = 0.421 kgs. / m. 26.6 20.3 50.0 35.4 S20003 Weight = 0.761 kgs. / m. 2.2 2.5 S20002 Weight = 0.443 kgs. / m. 30.8 22.5 S20006 Weight = 0.605 kgs. / m. 41.2 30.5 2.2 Page 48

49. S20005 Weight = 1.754 kgs. / m. S20004 Weight = 1.449 kgs. / m. 30.8 70.0 Page 49 TRANSPORTATION

50. SUNSHADE 92.58 98.0 1.2 S22206 Weight = 0.550 kgs. / m. 93.0 97.0 2.0 S22006 Weight = 0.821 kgs. / m. Page 50

51. 1.8 101.6 19.0 S22207 Weight = 0.446 kgs. / m. S22007 Weight = 0.496 kgs. / m. 101.6 19.02.0 Page 51 SUNSHADE

52. 85.0 15.5 0.8 S22213 Weight = 0.233 kgs. / m. 42.25 42.0 1.2 S22211 Weight = 0.213 kgs. / m. Page 52 SUNSHADE

53. CURTAIN WALLS Page 53

54. 101.6 44.45 1.5 S24500 Weight = 1.383 kgs. / m. S24501 Weight = 0.249 kgs. / m. 14.7 39.0 1.2 S24502 Weight = 2.85 kgs / m. 127.0 63.5 2.5 S24503 Weight = 1.70 kgs. / m. 2.0 63.5 75.5 S24504 Weight = 0.665 kgs. / m. S24505 Weight = 0.570 kgs. / m. 61.3 9.5 2.5 63.5 25.4 1.8 CURTAIN WALLS Page 54

55. S24506 Weight = 1.60 kgs. / m. S24507 Weight = 0.45 kgs. / m. 86.6 50.8 2.0 48.6 1.2 S24508 Weight = 0.31 kgs. / m. 50.8 18.0 1.2 S24509 Weight = 2.39 kgs. / m. 58.0 96.0 2.5 Page 55 CURTAIN WALLS

56. CASEMENT DOORS & WINDOWS Page 56

57. CASEMENT WINDOWS & DOORS S23100 Weight = 0.368 kgs. / m. 1.3 S23102 Weight = 0.579 kgs. / m. S23103 Weight = 0.127 kgs. / m. 16.0 21.9 49.0 40.5 S23104 Weight = 0.726 kgs. / m. 63.15 48.0 S23098 Weight = 0.888 kgs. / m. 32.0 37.0 S23097 Weight = 0.392 kgs. / m. Page 57

58. S23110 Weight = 0.747 kgs. / m. 1.5 57.6 29.35 S23111 Weight = 0.312 kgs. / m. 6.30 50.8 S23106 Weight = 1.577 kgs. / m. S23109 Weight = 0.796 kgs. / m. 34.2 18.0 S23218 Weight = 0.172 kgs. / m. S23500 Weight = 0.747 kgs. / m. Page 58 CASEMENT WINDOWS & DOORS

59. S23503 Weight = 0.334 kgs. / m. S23501 Weight = 1.057 kgs. / m. S23502 Weight = 1.014 kgs. / m. S23505 Weight = 0.457 kgs. / m. S23506 Weight = 0.691 kgs. / m. S23507 Weight = 0.334 kgs. / m. 1.5 2.0 Page 59 CASEMENT WINDOWS & DOORS

60. ROUND BARS D Page 60

61. SQUARE BARS A B Page 61

62. FLAT BARS A T Page 62

63. A T Page 63 FLAT BARS

64. EQUAL ANGLES Page 64 A T

65. EQUAL ANGLES A T A Page 65

66. UNEQUAL ANGLES B A T Page 66

67. UNEQUAL CHANNELS B T A Page 67

68. SQUARE TUBES T A A Page 68

69. T A A Page 69 SQUARE TUBES

70. RECTANGULAR TUBES T B A Page 70

71. RECTANGULAR TUBES T B A Page 71

72. RECTANGULAR TUBES T B A Page 72

73. ROUND TUBES T D Page 73

74. T D Page 74 ROUND TUBES

75. T D Page 75 ROUND TUBES

76. T D Page 76 ROUND TUBES