1. Presents

2. Solid Start The Solid Start family began developing and manufacturing maintenance chemicals in 1976 for: –Automotive –Racing –Heavy industry

3. Solid Start - continued Solid Start family products have been sold worldwide –In more than 100 countries

4. Now Solid Start Introduces Cold-Plus® A/C & Refrigeration Treatment –Unique patent-pending two-stage technology

5. Cold-Plus® Benefits 1. Reduces friction with PTFE Called “the slickest substance known to man” –Like “wet ice on wet ice” Chemically inert –Does not react with other chemicals

6. Cold-Plus® Benefits – continued 2. Surfactants & detergents remove oil fouling –ASHRAE (American Society of Heating, Refrigeration and Air Conditioning Engineers) says that … Due to oil fouling –First year; up to 7% efficiency loss –Second year; up to 5% loss –Following years; 2% lost per year –Loss peaks at between 20 - 30%.

7. Cold-Plus® Benefits – continued First oil fouling is removed Then nanopolymers help prevent the return of oil fouling Photos of inside A/C tubes cut in half demonstrate oil fouling removal Before treatment 10 days after treatment 26 months after treatment

8. Cold-Plus® Benefits – continued 3. Speeds thermodynamics –Heat transfer - A/C cooling phase –Cold transfer - heat pump phase How? –Less oil fouling improves heat & cold transfer –Nanopolymers reduce surface tension and improve refrigerant flow

9. Cold-Plus® Benefits – continued 4.Improves pool boiling (liquid turning to gas) How? –Polymers act as a nuclei (center) –Causes Pool Boiling approximately 20% faster See Cold-Plus video for live demonstration

10. Cold-Plus® Benefits – continued Everyday life example of the improved heat transfer that speeds pool boiling: o Many steam irons recommend using tap water vs. distilled water*. Particles in tap water improve heat transfer efficiency. * A Consumer Reports study of 46 steam irons concluded that using distilled water risks ruining your iron and rendering your warranty useless. Reference: Appliance News; March 2, 2012

11. Cold-Plus® Benefits – continued 5.Longer equipment life –PTFE treatment reduces friction and can extend compressor life PTFE, like “wet ice on wet ice”

12. Cold-Plus® Benefits – continued 6. Reduced costs for utilities, power & fuel

13. Cold-Plus® Benefits – continued 7. Reduced costs for maintenance and repair

14. Cold-Plus® vs. the Competition Cold-Plus® provides unique “second stage” benefits beyond the competition –Oil fouling is removed and replaced with permanently bonded slippery PTFE to prevent oil fouling’s return and increase refrigerant flow. –Other inert nano-sized polymer particles circulate with refrigerant acting as a source of enhanced pool boiling, thus speeding thermodynamics and removing more heat.

15. Application Longevity Each Cold-Plus® application lasts the life of the system ROI (Return on Investment) is assured

16. Test Documentation Test documents demonstrate: –Removed oil fouling removal –Improved thermal transfer –Reduced costs for utilities / power / fuel –Reduced emissions & environmental impact –Increased lubricity –Reduced compressor run time Continued – next slide

17. Test Documentation – continued Test documents demonstrate: –Reduced start-up amp draw –Improved pool boiling –Longer Unit Life –Reduced Maintenance Costs –Application Longevity –ROI (Return on Investment)

18. Dr. Peter Jenkins “One of the main advantages of the Cold-Plus® technology is its ability to provide a longer lasting protection than any other product on the market.” PhD - Purdue University IEM - Harvard University MS - Southern Methodist U BS - University of Kansas - U.S. Naval Academy MBA - Pepperdine University

19. Further Information Contact your Cold-Plus® representative Thank you!