1. Work, Power, and Machines
Section 8.1

2. Objectives Define work and power
Calculate the work done on an object and the rate at which work is done
Use the concept of mechanical advantage and calculate it

3. Is this considered work?

4. Work
Definition: A quantity that measures the effects of a force acting over a distance
Equation: W = Force * distance
W = F * d
Measured in units of Joules (J)
No force = no work
Example: A ball rolling on a flat surface at constant velocity
No distance = no work
Example: A weightlifter holding a huge weight overhead, but not moving it.
Force and distance must also act parallel to each other, so is the ant actually doing any work?

5. Example
A crane uses an average force of 5200 N to lift a girder 25 meters. How much work does the crane do on the girder?
W = F * d
W = (5200 N) * (25 m)
W = 130,000 J

6. The definition of power?

7. Power
Definition: A quantity that measures the rate at which work is done
Equation: Power = work / time
P = W / t
Measured in units of Watts (W)
In general: Doing the same amount of work but in less time requires more power. (running vs. walking upstairs to the 10th floor)

8. Example:
A crane uses an average force of 5200 N to lift a girder 25 meters in a time of 150 seconds. Calculate the power output of the crane.
W = F * d
W = (5200 N) * (25 m)
W = 130,000 J
P = W / t
P = (130,000 J) / (150 s)
P = 870 W

9. Mechanical Advantage
Definition: A quantity that measures how much a machine multiplies force or distance
Equation:
Mechanical advantage = output force / input force
Mechanical advantage = input distance / output distance

10. A mathematical example:
W = F * d
2 J = 2 N * 1 m
2 J = 1 N * 2 m
2 J = 0.5 N * 4 m
2 J = 0.25 N * 8 m
2 J = N * 16 m
2 J = N * 32 m

11. Moral of the story:
If you’re not superman, you can use mechanical advantage to lift a car by applying small forces repeatedly over larger distances to do the same amount of work

12. Example:
Determine the mechanical advantage of an automobile jack that lifts a 9900 N car with an input force of 150 N.
Mechanical advantage = output force / input force
Mechanical advantage = 9900 N / 150 N
Mechanical advantage = 66

13. Bonus: Rube-Goldberg Rube Goldberg device Watch for these things:
Count how many times gravity pulls an object downward.
Count how many times a given object is moving.
See if there are other ways in which energy is being stored and/or released.