1. Introducing the Canon Powershot 410 Digital Still Camera Click to advance to the next page

2. Taking Still Pictures Press the “power button” on Move the “mode switch” dial to the right to “camera mode” Set the “shooting mode dial” as shown in illustration below Move the “mode switch” to “camera mode” Use “wide angle” switch to zoom in or out as needed Press the shutter button when ready to take a picture To view the picture, move the “mode switch” to the left to “view picture mode”. Power Button Mode Switch Camera Mode View Picture Mode Shutter Button Wide Angle (zoom) Shooting Mode Dial

3. Using the Flash Adjusting the flash. Using the button illustrated below, you may switch flash settings Using the Flash

4. Shooting Close-Ups/Landscapes Using the button illustrated below, you may switch close-up settings Shooting Close-Ups

5. Taking Short Video Clips Move Shooting Mode Dial to setting in illustration below Make sure “mode switch” is set to camera mode Press the shutter button and begin taking the video. A red dot will appear in the display screen indicating video is being recorded When finished recording, press the shutter button again and the video will stop Shooting Mode Dial Shutter Button Mode Switch Camera Mode

6. Deleting Images from Computer Move “Mode Switch” to “view picture mode” Click on the “Menu” button Using the up and down arrows, scroll down to “erase all” Press the “Set” button You will be asked to erase all images. Using the right arrow button, scroll to the right and highlight “OK”. Press the “set” button When you have erased all images the screen will say “No Image”. Mode Switch View Picture Mode Up/down Right/left arrows

7. Transferring Images to the Computer Plug the USB cable into the side of the camera labeled A/V out/digital. Plug the other end of the cable into the computer USB port Change the mode switch to “view picture mode” The computer will recognize the camera, read your data and instruct you to identify a program to download your pictures Transferring to a PC computer To computer USB port Mode Switch View picture mode

8. Transferring Images to the Computer Plug the USB cable into the side of the camera labeled A/V out/digital. Plug the other end of the cable into the computer USB port Change the mode switch to “view picture mode” The computer will recognize the camera using iPhoto, read your data and instruct you to download the pictures Transferring to a Macintosh computer To computer USB port Mode Switch View picture mode