2. HAMMERS, PUNCHES & CHISELS

3. HAMMERS

4. BALL PEEN HAMMER PARTS HANDLE HEAD PEENING SURFACE

5. HAMMER PURPOSES USED TO DRIVE, BEND, STRAIGHTEN, ADJUST, PULL, AND ALIGN THINGS

6. PROPER USE OF HAMMER HOLD HAMMER FIRMLY NEAR END OF HANDLE STRIKE SQUARELY HANDLE CAN HIT YOUR ARM WHILE SWINGING CAUSING YOU TO MISS

7. PROPER USE OF HAMMER CHOOSE THE CORRECT SIZE FOR THE JOB YOU ARE DOING HEAD TWICE THE SIZE TOO BIG OF HAMMER

8. HAMMER MAINTENANCE BEFORE USING, MAKE SURE HANDLE IS NOT CRACKED OR BROKEN MAKE SURE HEAD IS ON TIGHTLY MAKE SURE HEAD ISN’T CRACKED

9. HAMMERS TYPES SLEDGEBALL PEENMALLET CLAW DEAD BLOW

10. HAMMER SIZES

11. PUNCHES

12. PUNCH PURPOSE USED TO DRIVE, PUSH, OR ALIGN THINGS ALL PUNCHES HAVE A FLAT NOSE EXCEPT THE CENTER PUNCH

13. PUNCH TYPES SOFT HARDENED STRAIGHT PUNCH TAPER PUNCH CENTER PUNCH HAS SHARP POINT

14. CENTER PUNCH USE MARKS METAL WITH SMALL INDENTATION TO HELP KEEP DRILL BIT CENTERED

15. CHISELS COLD ROUND NOSE CAPE DIAMOND CHISEL CHISEL CHISEL POINT CHISEL

16. CHISEL PURPOSES USED TO CUT THINGS CHISELS HAVE SHARP CUTTING ENDS

17. PROPER USE & SAFETY PUNCHES & CHISELS MAKE SURE THE HEAD DOESN’T HAVE A “MUSHROOMED” TOP –GRIND OFF BEFORE USING

18. PROPER USE & SAFETY PUNCHES & CHISELS (ON TOOL TEST) HOLD THE PUNCH OR CHISEL NEAR THE TOP OF THE HEAD –THIS ALLOWS YOUR HAND SOME GIVE IF YOU MISS WITH YOUR HAMMER

19. PROPER USE

20. PROPER USE & SAFETY ALWAYS USE EYE PROTECTION STRIKE SQUARELY USE THE PROPER SIZE OF HAMMER

21. HAMMERS PUNCHES & CHISELS QUESTIONS?