Presentation is loading. Please wait.

Presentation is loading. Please wait.

Lesson 13.2 Mining More than a ton of waste may remain after extracting just a few hundredths of an ounce of gold.

Similar presentations


Presentation on theme: "Lesson 13.2 Mining More than a ton of waste may remain after extracting just a few hundredths of an ounce of gold."— Presentation transcript:

1 Lesson Mining More than a ton of waste may remain after extracting just a few hundredths of an ounce of gold.

2 Lesson 13.2 Mining What Is Mined? Ores: Groups of minerals that are mined so metal or metals can be removed Nonmetallic minerals: Minerals, including gemstones, that as a whole have valuable properties Fuels: Minerals that can be used to generate energy Did You Know? About 100 minerals are considered gemstones, including diamond, topaz, and jade.

3 Process of Mining and Mineral Use
Lesson 13.2 Mining Process of Mining and Mineral Use From initial exploration to disposal, mining and mineral use involve many steps.

4 Mining Methods Surface mining Strip mining Open pit mining
Lesson 13.2 Mining Mining Methods Surface mining Strip mining Open pit mining Mountaintop removal Solution mining Placer mining Undersea mining Subsurface mining A strip mining operation in Wyoming Did You Know? Some subsurface mines in South Africa extend 4 km underground.

5 Lesson 13.2 Mining Strip Mining The practice of mining a seam of mineral, by first removing a long strip of overlying soil and rock Strip mining is only practical when the ore body is relatively near the surface. There are two forms of strip mining: area stripping and contour stripping. Area Stripping: used on fairly flat terrain to extract deposits over a large area. Contour Stripping: used in hilly terrain where the ore deposit usually follows the contour of the land.

6 Lesson 13.2 Mining Strip Mining

7 Lesson 13.2 Mining Subsurface Mining Digging tunnels or shafts into the Earth to reach ore deposits Ore, for processing, and waste rock, for disposal, are brought to the surface through the tunnels and shafts.

8 Lesson 13.2 Mining Subsurface Mining

9 Lesson 13.2 Mining Open Pit Mining A method of extracting ore from the Earth by its removal from a large pit Different than strip mining because it goes down deeper into the Earth, Ore Ore Strip Mining Open Pit

10 Lesson 13.2 Mining Open Pit Mining Lavender Mine, Bisbee AZ

11 Mountaintop Removal Involves the mining of the top of a mountain.
Lesson 13.2 Mining Mountaintop Removal Involves the mining of the top of a mountain. Entire ore bodies are extracted from a mountain, hill, or ridge by removing the land above the seams, usually through explosives. The land is dumped back on the ridge and compacted to reflect the original shape of the mountain

12 Lesson 13.2 Mining Mountaintop Removal

13 Lesson 13.2 Mining Solution mining Used to recover minerals such as copper and uranium through boreholes drilled into a deposit The process initially involves drilling of holes into the ore deposit. Explosives are then used to create open pathways in the deposit for solution to penetrate. A solution is pumped into the deposit where it makes contact with the ore. The solution bearing the dissolved ore content is then pumped to the surface and processed.

14 Lesson 13.2 Mining Solution mining

15 Lesson 13.2 Mining Placer Mining This type of mining takes valuable minerals from the sediments put down by rivers Rivers erode the land, taking out valuable minerals while they do so Sediment rich water is then placed through a filtration system, where the valuable minerals are kept and the rest put back into the river

16 Lesson 13.2 Mining Placer Mining

17 Lesson 13.2 Mining Undersea Mining Large machines suck or scoop up large amounts of sand and gravel from the sea floor The gravel and sand is then processed to extract valuable minerals More concentrated mineral deposits can be found and gathered from hydrothermal vents It is not very cost effective, and thus has been largely unsuccessful

18 Lesson 13.2 Mining Undersea Mining

19 Lesson 13.2 Mining Processing Ore Ores must be processed to gain access to the metals they contain. This occurs in three stages Breakdown of the ore Separation from the ore Metal production

20 Breakdown of Ore Ore is crushed and ground into tiny pieces
Lesson 13.2 Mining Breakdown of Ore Ore is crushed and ground into tiny pieces Particles must be small enough to properly separate the different minerals from each other

21 Separation of Ore Crushed ore is separated into metals and tailings
Lesson 13.2 Mining Separation of Ore Crushed ore is separated into metals and tailings Tailings: the waste product and unwanted particles Several methods of ore separation. The most common is froth flotation In this method, chemicals are added to the ground up ore to make the desired minerals float on top of water Once they float, they can be easily separated

22 Lesson 13.2 Mining Metal Production Once the ore has been separated, metals can be produced by smelting In smelting, crushed ore is put into a furnace and heated to its melting point Once it is melted, the impurities separate from the ore, giving the pure quantities of the metal desired

23 Lesson 13.2 Mining Processing Ore

24

25

26

27

28

29


Download ppt "Lesson 13.2 Mining More than a ton of waste may remain after extracting just a few hundredths of an ounce of gold."

Similar presentations


Ads by Google