Presentation is loading. Please wait.

Presentation is loading. Please wait.

An Event at Kitty Hawk. Objectives Know how the Wright brothers succeeded in the first flight Know the anatomy of the Wright Flyer Know the principles.

Similar presentations


Presentation on theme: "An Event at Kitty Hawk. Objectives Know how the Wright brothers succeeded in the first flight Know the anatomy of the Wright Flyer Know the principles."— Presentation transcript:

1 An Event at Kitty Hawk

2 Objectives Know how the Wright brothers succeeded in the first flight Know the anatomy of the Wright Flyer Know the principles of airplane flight Know the history of the Wright brothers’ involvement with the US Army

3 The Wright Brothers: Flight Checklist

4 The Wrights chose a glider as their starting point They could focus first on balancing and controlling the aircraft They discovered that they didn’t need to tilt an entire wing to turn the craft …only the ends of the wings (wing warping = ailerons) Engine power could come later 5 ft Wingspan Similar to Power Model Step 1: Build a Test Model

5 Between 1900 and 1902, the brothers built three gliders Before putting a man aboard, they flew each glider like a kite They wanted to test it for control and lift Only after doing this would they put a man aboard Step 2: Build a Manned Glider The Wright Brothers: Flight Checklist

6 The early glider experiments taught the brothers three important things: How to control climb and descent The best design for the shape of the wing How large the wing area had to be to sustain lift Step 2: Build a Manned Glider The Wright Brothers: Flight Checklist

7 The brothers test-flew their glider at Kill Devil Hills in 1900 It didn’t crash, but clearly improvements were necessary The Wrights headed back to Ohio to build the next version Step 2: Build a Manned Glider The1900 Glider The Wright Brothers: Flight Checklist

8 For the 1901 glider, the brothers increased the wing area to 290 square feet This glider was also a big disappointment…they couldn’t control it well when they tested it at Kill Devil Hills It flew less than 300 feet—time to return to Dayton! Step 2: Build a Manned Glider The1901 Glider The Wright Brothers: Flight Checklist

9 The brothers built a wind tunnel in their bicycle shop to test model-size wings Made them of sheet steel Cut more than 200 model wings of different shapes Step 2: Build a Manned Glider Wind Tunnel The Wright Brothers: Flight Checklist

10 This glider had two fixed, vertical rudders behind the wings Test flights showed that this resulted in erratic behavior during turns So the Wrights tried a single, movable, vertical rudder which greatly improved control The brothers took to the air in the North Carolina dunes more than 700 times in the fall of 1902 Step 2: Build a Manned Glider The1902 Glider The Wright Brothers: Flight Checklist

11 The brothers set out to fit their plane with an engine They tried to buy one ready made, b ut no one met their needs or price So they had their bicycle mechanic, Charles E. Taylor, build them a four- cylinder, 12-horsepower engine Step 3: Build an Engine The Wright Brothers: Flight Checklist

12 In September 1903 they returned to Kitty Hawk and Kill Devil Hills They built a trolley track to give their powered aircraft a running start Bad weather also caused delays The brothers tossed a coin, and Wilbur won However, on the first test flight of the Wright Flyer, he crashed it It took three days to repair the damaged craft Step 4: Test Flight The Wright Brothers: Flight Checklist

13 On 17 December, Orville took the controls The Flyer stayed aloft for 12 seconds and traveled 120 feet Orville had made the first controlled, sustained, heavier-than-air human flight with a powered aircraft The brothers took turns piloting the Flyer for three more flights The fourth and final launch lasted 59 seconds, and the craft traveled 852 feet Step 5: Success The Wright Brothers: Flight Checklist

14 Anatomy of the Wright Flyer Biplane with wingspan of 40 feet, four inches, and a wing area of 510 square feet

15 Wright Brothers’ Involvement With the US Army The Wright brothers continued refining their airplane In January 1905, they had contacted their representative in Congress (R. M. Nevin) and tried to interest the US government in buying their airplane Their offer was turned down The British and French governments were interested in buying the Flyer But the brothers wanted the US government to have the first crack at owning a Wright Flyer On 22 May 1906 they received a government patent for their invention

16 Ways the Wright Brothers Contributed to Army Aviation Orville spent much of 1908 and 1909 improving the Flyer He made more test flights and took up military passengers One such flight tragically ended in a crash that seriously injured Orville and killed 1 st Lt Thomas Selfridge; the first US military aviation casualty The Wright’s continued working with the Army as flight instructors

17 Army Airplanes It took a while for the Army to decide how to use airplanes during war At first, the Army thought that airplanes would be useful only for aerial reconnaissance World War I brought about a change in strategy But before that could happen, airplanes needed improvements to make them faster, sturdier, and more reliable

18 Objectives Know how the Wright brothers succeeded in the first flight Know the anatomy of the Wright Flyer Know the principles of airplane flight Know the history of the Wright brothers’ involvement with the US Army


Download ppt "An Event at Kitty Hawk. Objectives Know how the Wright brothers succeeded in the first flight Know the anatomy of the Wright Flyer Know the principles."

Similar presentations


Ads by Google