1. Hoop Tech Clamp Assembly and Attachment

2. Contents of package

3. The Base of the Hoop Clamp and wing attachments

4. Attach as shown…

6. This hoop is for heavy fabrics…

7. This hoop is for lighter weight fabrics

8. Attach hoop base as shown

9. Make sure that the clamp is in the open position

10. Then Tighten the large black knob

11. Attach top of hoop as shown Step 1…

12. Step 2

13. Then clip other side.

14. Now to place on the machine…

15. Turn on Machine

16. Press “Set” to complete Frame Move

17. With the control panel, move the x- carriage to the back

18. Insert Hoop tech clamp as shown

19. Slide the wings under the arm clamps as shown

21. Complete attachment

22. Adjust the side bolts for the correct height left and right.

23. End