1. © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Course v6 Chapter # 1 Chapter 1: Analyzing The Cisco Enterprise Campus Architecture CCNP SWITCH: Implementing IP Switching

2. Chapter # 2 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Chapter 1 Objectives  Describe common campus design options and how design choices affect implementation and support of a campus LAN.  Describe the access, distribution, and core layers.  Describe small, medium, and large campus network designs.  Describe the prepare, plan, design, implement, operate, optimize (PPDIOO) methodology.  Describe the network lifecycle approach to campus design.

3. Chapter # 3 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Introduction to Enterprise Campus Network Design

4. Chapter # 4 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Enterprise Network  Core (Backbone)  Campus  Data Center  Branch  WAN  Internet Edge

5. Chapter # 5 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Regulatory Standards (U.S.)  There may be several legal regulations that have an impact on a network’s design.  US regulations on networks include: Health Insurance Portability and Accountability Act (HIPAA) Sarbanes-Oxley Act “Records to Be Preserved by Certain Exchange Members, Brokers and Dealers”: Securities and Exchange Commission (SEC) Rule 17a- 4

6. Chapter # 6 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Campus Designs  Modular - easily supports growth and change. Scaling the network is eased by adding new modules in lieu of complete redesigns.  Resilient - proper high-availability (HA) characteristics result in near-100% uptime.  Flexible - change in business is a guarantee for any enterprise. These changes drive campus network requirements to adapt quickly.

7. Chapter # 7 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Multilayer Switches in Campus Networks  Hardware-based routing using Application-Specific Integrated Circuits (ASICs)  RIP, OSPF, and EIGRP are supported  Layer 3 switching speeds approximate that of Layer 2 switches  Layer 4 and Layer 7 switching supported on some switches  Future: Pure Layer 3 environment leveraging inexpensive L3 access layer switches

8. Chapter # 8 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Cisco Switches  Catalyst 6500 Family – used in campus, data center, and core as well as WAN and branch Up to 13 slots and 16 10-Gigabit Ethernet interfaces Redundant power supplies, fans, and supervisor engines Runs Cisco IOS  Catalyst 4500 Family – used in distribution layer and in collapsed core environments Up to 10 slots and several 10-Gigabit Ethernet interfaces Runs Cisco IOS  Catalyst 3560 and 3750 Families – used in fixed-port scenarios at the access and distribution layers  Nexus 2000, 5000, and 7000 Families – NX-OS based modular data center switches

9. Chapter # 9 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Multilayer Switching Miscellany  ASIC-based (hardware) switching is supported even with QoS and ACLs, depending on the platform; 6500 switches support hardware-based switching with much larger ACLs than 3560 switches.  ASICs on Catalyst switches work in tandem with ternary content addressable memory (TCAM) and packet-matching algorithms for high-speed switching.  Catalyst 6500 switches with a Supervisor Engine 720 and a Multilayer Switch Feature Card (MSFC3) must software-switch all packets requiring Network Address Translation.  Unlike CPUs, ASICs scale in switching architectures. ASICs integrate onto individual line modules of Catalyst switches to hardware-switch packets in a distributed manner.

10. Chapter # 10 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Traffic Types  Network Management – BPDU, CDP, SNMP, RMON, SSH traffic (for example); low bandwidth  IP Telephony – Signaling traffic and encapsulated voice traffic; low bandwidth  IP Multicast – IP/TV and market data applications; intensive configuration requirements; very high bandwidth  Normal Data – File and print services, email, Internet browsing, database access, shared network applications; low to medium bandwidth  Scavenger Class – All traffic with protocols or patterns that exceed normal data flows; less than best-effort traffic, such as peer-to-peer traffic (instant messaging, file sharing, IP phone calls, video conferencing); medium to high bandwidth

11. Chapter # 11 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Client-Server Applications  Mail servers  File servers  Database servers  Access to applications is fast, reliable, and secure

12. Chapter # 12 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Client-Enterprise Edge Applications  Servers on the enterprise edge, exchanging data between an organization and its public servers  Examples: external mail servers, e-commerce servers, and public web servers  Security and high availability are paramount

13. Chapter # 13 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Service-Oriented Network Architecture (SONA)  Application Layer – business and collaboration applications; meet business requirements leveraging interactive services layer.  Interactive Services Layer – enable efficient allocation of resources to applications and business processes through the networked infrastructure.  Networked Infrastructure Layer – where all IT resources interconnect.

14. Chapter # 14 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Borderless Networks  Enterprise architecture launched by Cisco in October 2009.  Model enables businesses to transcend borders, access resources anywhere, embrace business productivity, and lower business and IT costs.  Focuses more on growing enterprises into global companies.  Technical architecture based on three principles: Decoupling hardware from software Unifying computation, storage, and network Policy throughout the unified system  Provides a platform for business innovation.  Serves as the foundation for rich-media communications.

15. Chapter # 15 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Enterprise Campus Design

16. Chapter # 16 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Building Access, Building Distribution, and Building Core Layers  Building Core Layer: high- speed campus backbone designed to switch packets as fast as possible; provides high availability and adapts quickly to changes.  Building Distribution Layer: aggregate wiring closets and use switches to segment workgroups and isolate network problems.  Building Access Layer: grant user access to network devices.

17. Chapter # 17 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Core Layer  Aggregates distribution layer switches.  Implements scalable protocols and technologies and load balancing.  High-speed layer 3 switching using 10-Gigabit Ethernet.  Uses redundant L3 links.

18. Chapter # 18 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Distribution Layer  High availability, fast path recovery, load balancing, QoS, and security  Route summarization and packet manipulation  Redistribution point between routing domains  Packet filtering and policy routing to implement policy-based connectivity  Terminate VLANs  First Hop Redundancy Protocol

19. Chapter # 19 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Access Layer  High availability – supported by many hardware and software features, such as redundant power supplies and First Hop Redundancy Protocols (FHRP).  Convergence – provides inline Power over Ethernet (PoE) to support IP telephony and wireless access points.  Security – includes port security, DHCP snooping, Dynamic ARP inspection, IP source guard.

20. Chapter # 20 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Small Campus Network  <200 end devices  Collapsed core  Catalyst 3560 and 2960G switches for access layer  Cisco 1900 and 2900 routers to interconnect branch/WAN

21. Chapter # 21 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Medium Campus Network  200-1000 end devices  Redundant multilayer switches at distribution layer  Catalyst 4500 or 6500 switches

22. Chapter # 22 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Large Campus Network  >2000 end users  Stricter adherence to core, distribution, access delineation  Catalyst 6500 switches in core and distribution layers  Nexus 7000 switches in data centers  Division of labor amongst network engineers

23. Chapter # 23 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Data Center Infrastructure  Core layer – high-speed packet switching backplane  Aggregation layer – service module integration, default gateway redundancy, security, load balancing, content switching, firewall, SSL offload, intrusion detection, network analysis  Access layer – connects servers to network

24. Chapter # 24 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public PPDIOO Lifecycle Approach to Network Design and Implementation

25. Chapter # 25 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public PPDIOO Phases  Prepare – establish organizational requirements.  Plan – identify initial network requirements.  Design – comprehensive, based on planning outcomes.  Implement – build network according to design.  Operate – maintain network health.  Optimize – proactive management of network.

26. Chapter # 26 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Lifecycle Approach  Lowering the total cost of network ownership  Increasing network availability  Improving business agility  Speeding access to applications and services  Identifying and validating technology requirements  Planning for infrastructure changes and resource requirements  Developing a sound network design aligned with technical requirements and business goals  Accelerating successful implementation  Improving the efficiency of your network and of the staff supporting it  Reducing operating expenses by improving the efficiency of operational processes and tools

27. Chapter # 27 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Lifecycle Approach (1)  Benefits: Lowering the total cost of network ownership Increasing network availability Improving business agility Speeding access to applications and services  Lower costs: Identify and validate technology requirements Plan for infrastructure changes and resource requirements Develop a sound network design aligned with technical requirements and business goals Accelerate successful implementation Improve the efficiency of your network and of the staff supporting it Reduce operating expenses by improving the efficiency of operational processes and tools

28. Chapter # 28 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Lifecycle Approach (2)  Improve high availability: Assessing the network’s security state and its capability to support the proposed de­sign Specifying the correct set of hardware and software releases, and keeping them opera­tional and current Producing a sound operations design and validating network operations Staging and testing the proposed system before deployment Improving staff skills Proactively monitoring the system and assessing availability trends and alerts  Gain business agility: Establishing business requirements and technology strategies Readying sites to support the system that you want to implement Integrating technical requirements and business goals into a detailed design and demonstrating that the network is functioning as specified Expertly installing, configuring, and integrating system components Continually enhancing performance  Accelerate access to network applications and services: Assessing and improving operational preparedness to support current and planned network technologies and services Improving service-delivery efficiency and effectiveness by increasing availability, resource capacity, and performance Improving the availability, reliability, and stability of the network and the applications running on it Managing and resolving problems affecting your system and keeping software applications current

29. Chapter # 29 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Planning a Network Implementation  Implementation Components: Description of the step Reference to design documents Detailed implementation guidelines Detailed roll-back guidelines in case of failure Estimated time needed for implementation  Summary Implementation Plan – overview of implementation plan  Detailed Implementation Plan – describes exact steps necessary to complete the implementation phase, including steps to verify and check the work of the network engineers implementing the plan

30. Chapter # 30 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Chapter 1 Summary  Evolutionary changes are occurring within the campus network.  Evolution requires careful planning and deployments based on hierarchical designs.  As the network evolves, new capabilities are added, usually driven by application data flows.  Implementing the increasingly complex set of business- driven capabilities and services in the campus architecture is challenging if done in a piecemeal fashion.  Any successful architecture must be based on a foundation of solid design theory and principles. The adoption of an integrated approach based on solid systems design principles is a key to success.

31. Chapter # 31 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public  Lab 1-1Clearing a Switch  Lab 1-2Clearing a Switch Connected to a Larger Network Chapter 1 Labs

32. Chapter # 32 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public Resources  www.cisco.com/en/US/products www.cisco.com/en/US/products

33. Chapter # 33 © 2007 – 2010, Cisco Systems, Inc. All rights reserved. Cisco Public