1. AIAA University of Minnesota Chapter American Institute of Aeronautics and Astronautics

2. Student Level ● Networking ● Tours ● Paper Conferences ● Outreaching Events ● Host for Recruitment Opportunities ● Projects

3. RC Plane Project Objectives ● Become familiar with the components that make up R.C. planes ● Gain the piloting skills needed to successfully take off/land solo ● Apply material learned in class to R.C. planes – Improving upon designs, observing stall characteristics, etc.

4. RC Plane Project Methods ● “Buddy Box” system ● Computer Simulator

5. RC Plane Project Future Projects ● Fly Larger Scale Planes ● Competitions ● FPV Streaming ● Building Kit Planes

6. CanSat 2012 CanSat is a Design Build Fly Competition that reflects a typical aerospace system. Mission : The Mission is to Launch an autonomous CanSat that consists of large hen’s egg and should be deployed at an 470 to 650m altitude, once deployed you should have a decent system that could reduce the decent rate to 10m/s and 5m/s at 91meters eventually.

8. CanSat 2013

9. Midwest Paper Conference 2014 – Aerospace Midwest Paper conferecne – From : April 2 nd – April 4 th – Location : University of Minnesota Twincities – Deadlines for Abstracts Feb 2 nd week – Excellent Opportunity to publish your research, meet the aerospace companies, take tours in the aerospace department labs(National hypersonic labs, UAV labs, Control systems Labs, Wind tunnel and many more labs.