Presentation is loading. Please wait.

Presentation is loading. Please wait.

Ken YoussefiIntroduction to Engineering – E10 1 Sweep Creates a solid with uniform cross section Profile Path Loft (sweep and blend combined Creates a.

Published byEvan Golden Modified over 9 years ago

Similar presentations

Presentation on theme: "Ken YoussefiIntroduction to Engineering – E10 1 Sweep Creates a solid with uniform cross section Profile Path Loft (sweep and blend combined Creates a."— Presentation transcript:

1 Ken YoussefiIntroduction to Engineering – E10 1 Sweep Creates a solid with uniform cross section Profile Path Loft (sweep and blend combined Creates a solid with different cross sections, multiple paths could be used

2 Sweep Command Ken YoussefiIntroduction to Engineering – E10 2 Creates a swept solid Removes material as it sweeps

3 Sweep Ken YoussefiIntroduction to Engineering – E10 3 Sweep command creates a solid by sweeping a profile along a specified path. Path Profile (2D sketch) A sweep feature requires two sketches; a profile and a path. These two sketches cannot lie on the same plane or be parallel. The path can be either open or closed profile. It could lie on one plane or lie on multiple planes (3D sketch)

4 Ken YoussefiIntroduction to Engineering – E10 4 Sweep Command in SW Path Profile Sweep using a profile, path and Follow Path option

5 Ken YoussefiIntroduction to Engineering – E10 5 Sweep Command in SW Sweeps using different Options Keep normal constant Twisted Follow Path

6 Ken YoussefiIntroduction to Engineering – E10 6 Sweep Command in SW Sweep using a profile, path and one guide Path Profile Guide curve 1

7 Ken YoussefiIntroduction to Engineering – E10 7 Sweep Command in SW Sweep using a profile, path and two guides

8 Ken YoussefiIntroduction to Engineering – E10 8 Sweep Command in SW Sweep using Merge Smooth Faces option Path Guide curve

9 Ken YoussefiIntroduction to Engineering – E10 9 Sweep Command in SW

10 Ken YoussefiIntroduction to Engineering – E10 10 Loft Command in SW Loft command creates a surface or a solid by sweeping and blending using two or more different profiles. List of profiles List of Guides

11 Ken YoussefiIntroduction to Engineering – E10 11 Loft Command in SW Profile normal to the plane at the end Profile normal to the plane at the start Start and End Constraints options

12 Ken YoussefiIntroduction to Engineering – E10 12 Loft Command in SW Loft using a single Guide Curve. Profile Guide, 3D sketch

13 Ken YoussefiIntroduction to Engineering – E10 13 Loft Command in SW Loft using many Guide Curves. Guide 1 Guide 2 Guide 4 Guide 3 Guides 1,2 Guides 1,2,3 Guides 1,2,3,4

14 Ken YoussefiIntroduction to Engineering – E10 14 Loft Command in SW Merging a Loft with a feature

15 Ken YoussefiIntroduction to Engineering – E10 15

16 Ken YoussefiIntroduction to Engineering – E10 16 10 spline sketches on planes.3 inches apart

17 Example Ken YoussefiIntroduction to Engineering – E10 17

18 Ken YoussefiIntroduction to Engineering – E10 18

19 Ken YoussefiIntroduction to Engineering – E10 19

20 Ken YoussefiIntroduction to Engineering – E10 20 Knife handle

21 Ken YoussefiIntroduction to Engineering – E10 21 Knife blade Hand and wrist

Download ppt "Ken YoussefiIntroduction to Engineering – E10 1 Sweep Creates a solid with uniform cross section Profile Path Loft (sweep and blend combined Creates a."

Similar presentations

Course Introduction to virtual engineering Óbuda University John von Neumann Faculty of Informatics Institute of Applied Mathematics Lecture and laboratory.

Course Introduction to virtual engineering Óbuda University John von Neumann Faculty of Informatics Institute of Applied Mathematics Lecture and laboratory.
6. Revolved Protrusions The revolve option creates a feature by revolving the sketched section around a centerline from the sketching plane into the part.

6. Revolved Protrusions The revolve option creates a feature by revolving the sketched section around a centerline from the sketching plane into the part.
3D Modeling Features and Modeling Strategy Professor Name Course Name.

3D Modeling Features and Modeling Strategy Professor Name Course Name.
Ken YoussefiPDM I,SJSU 1 Sweep Command – Sweep along a Guide Guide Section Insert → Sweep → Sweep along Guide Or select Sweep along from the toolbar Sweep.

Ken YoussefiPDM I,SJSU 1 Sweep Command – Sweep along a Guide Guide Section Insert → Sweep → Sweep along Guide Or select Sweep along from the toolbar Sweep.
SolidWorks Session 5 Ferdowsi University of Mashhad Dr. Behnam Moetakef Imani.

SolidWorks Session 5 Ferdowsi University of Mashhad Dr. Behnam Moetakef Imani.
SolidWorks Teacher Guide Lesson9 School’s Name Teacher’s Name Date.

SolidWorks Teacher Guide Lesson9 School’s Name Teacher’s Name Date.
Variable section sweep  The Variable section sweep option is used to create a sweep feature in which the section varies according to the trajectory.

Variable section sweep  The Variable section sweep option is used to create a sweep feature in which the section varies according to the trajectory.
Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Chapter 9 3D Modeling.

Copyright © The McGraw-Hill Companies, Inc. Permission required for reproduction or display. Chapter 9 3D Modeling.
Image courtesy of National Optical Astronomy Observatory, operated by the Association of Universities for Research in Astronomy, under cooperative agreement.

Image courtesy of National Optical Astronomy Observatory, operated by the Association of Universities for Research in Astronomy, under cooperative agreement.
Image courtesy of National Optical Astronomy Observatory, operated by the Association of Universities for Research in Astronomy, under cooperative agreement.

Image courtesy of National Optical Astronomy Observatory, operated by the Association of Universities for Research in Astronomy, under cooperative agreement.
Operators in CAD Systems

Operators in CAD Systems
 Extrude  Revolve  Sweep  Loft  One or more closed profiles  Height added normal/perpendicular to the sketch  No gaps or intersecting lines in.

 Extrude  Revolve  Sweep  Loft  One or more closed profiles  Height added normal/perpendicular to the sketch  No gaps or intersecting lines in.
ME 150 Engineering Drawing 1 Lab 3: 3D Intoduction 1 Umm Al-Qura University College of Engineering & Islamic Architecture Mechanical Engineering Department.

ME 150 Engineering Drawing 1 Lab 3: 3D Intoduction 1 Umm Al-Qura University College of Engineering & Islamic Architecture Mechanical Engineering Department.
Introduction to Solid Modeling

Introduction to Solid Modeling
Some Material on Swept Solids and Surfaces of Revolution From Chapter 10 of Mortenson Sections 10.5 – 10.6 Geometric Modeling 91.580.201.

Some Material on Swept Solids and Surfaces of Revolution From Chapter 10 of Mortenson Sections 10.5 – 10.6 Geometric Modeling
Edge Blend Constant radius edge blend Handlebar. Edge Blend - Variable 5 mm radius for 25% length of the edge 10 mm radius for the next 25% 15 mm radius.

Edge Blend Constant radius edge blend Handlebar. Edge Blend - Variable 5 mm radius for 25% length of the edge 10 mm radius for the next 25% 15 mm radius.
SolidWorks Surfaces Ferdowsi University of Mashhad

SolidWorks Surfaces Ferdowsi University of Mashhad
SolidWorks Session 5 Ferdowsi University of Mashhad

SolidWorks Session 5 Ferdowsi University of Mashhad
Ken Youssefi Engineering 10, SJSU 1 The Blade Shape Design groups should conduct a thorough search of the internet to obtain information on turbine rotor.

Ken Youssefi Engineering 10, SJSU 1 The Blade Shape Design groups should conduct a thorough search of the internet to obtain information on turbine rotor.
SDC PUBLICATIONS © 2012 Chapter 11 Geometric Construction Tools Learning Objectives:  Applying Geometry Constraints  Use the Trim/Extend Command  Use.

SDC PUBLICATIONS © 2012 Chapter 11 Geometric Construction Tools Learning Objectives:  Applying Geometry Constraints  Use the Trim/Extend Command  Use.

Similar presentations

Ads by Google