1. NFPA 70E 2015 & OSHA 1910.269 Update – Maximize Your Options
Page 1 | © Magid
NFPA 70E 2015 & OSHA Update – Maximize Your Options

2. The Issue
Page 2 | © Magid
80% of all electrically related accidents and fatalities involving “Qualified Workers” are caused by Arc blast/Arc flash
Source: OSHA

3. Electric Arc Flash Incident
Page 3 | © Magid

4. AR/FR Clothing is Needed
Page 4 | © Magid
Everyday apparel can ignite and burn if exposed to an ignition source such as a flame or electric arc.
FR protective apparel is designed to resist clothing ignition and, in the event it does ignite, self-extinguish immediately upon removal from the thermal source.

5. Arc Flash Power
Page 5 | © Magid

6. AR/FR Clothing is Needed
Page 6 | © Magid
Without FR garments, clothed areas can be burned more severely than exposed skin

7. Applying the Standard Changes to AR/FR Clothing Selection
Page 7 | © Magid
Applying the Standard Changes to AR/FR Clothing Selection

8. NFPA 70E and OSHA CFR 29.1910.269 changes
Agenda
Page 8 | © Magid
NFPA 70E and OSHA CFR changes
Managing your AR/FR clothing assets
Magid’s response to the new standards

9. Changes to how you categorize your hazard level
NFPA 70E 2015 Edition
Page 9 | © Magid
Changes to how you categorize your hazard level
Elimination of HRC 0 moving all electrical work into arc rated clothing
Transition from HRC categories to PPE categories
New PPE category tables
Arc Flash Hazard PPE Categories
Arc Flash Hazard PPE Category
Protective Clothing
Minimum Arc Rating of PPE (cal/cm²) 1
1 layer: FR long-sleeve shirt, FR pants, FR coverall, head protection, leather protectors, foot protection, eye protection, voltage rated gloves 4 2
1 or 2 layers: T-shirt, FR long-sleeve shirt, FR pants, FR coverall, face shield, voltage rated, leather protectors, foot protection, cotton underwear, eye protection, hearing protection, head protection 8 3
2 or 3 layers: T-shirt, FR long-sleeve shirt, FR pants, FR coverall, flash hood, voltage rated gloves, leather protectors, foot protection, cotton underwear, eye protection, hearing protection, head protection 25
3 or more layers: T-shirt, FR long-sleeve shirt, FR pants, FR coverall, flash hood, voltage rated gloves, leather protectors, foot protection, cotton underwear, eye protection, hearing protection, head protection 40
Source: ohsonline.com

10. NFPA 70E 2015 Edition ARC Rated Balaclava Requirements
Page 10 | © Magid
ARC Rated Balaclava Requirements
Non-Melting Clothing Required Under AR Clothing
Required where incident energy is greater than 1.2cal/cm² to 12cal/cm²
Non-AR garments worn underneath AR clothing must be made of all-natural, non-melting fibers.

11. Introduction of “AR” – Arc Rated New tuck in the shirt requirement
NFPA 70E 2015 Edition
Page 11 | © Magid
Introduction of “AR” – Arc Rated
New tuck in the shirt requirement
Shirts are required to be tucked into pants. Shirts and coveralls must be fastened at the wrist and closed at the neck.

12. 6 Critical Changes Regarding FRC Requirements effective April 1, 2015
OSHA 29 CFR
Page 12 | © Magid
6 Critical Changes Regarding FRC Requirements effective April 1, 2015
New Minimum Protection
Employers must provide head-to-toe FR clothing with an arc rating greater than or equal to all hazards greater than 2 calories or for work above 600 volts.
Workers will now be required to wear FR pants, balaclavas or face shields, boots and gloves.
Arc Rated and FR Clothing Now Treated as PPE
This means the employer is now responsible for the cost of providing this equipment.
Indication of Support for Allowance Programs
Straightforward approach to compliance - Issue employee allowance in the amount of $455 annually and one-time new hire allowances of $1,534.

13. 6 Critical Changes Regarding FRC Requirements effective April 1, 2015
OSHA 29 CFR
Page 13 | © Magid
6 Critical Changes Regarding FRC Requirements effective April 1, 2015
OSHA Supports Home Laundering
The final rule does not require employers to launder protective clothing for employees.
Employer Responsibility for Care & Maintenance of FR Clothing
If employers rely on home laundering of FR clothing, they must train their employees in proper laundering procedures and techniques.
Employers must inspect the clothing on a regular basis to ensure that it is not in need of repair or replacement.
Cost of Changes to for Employers
OSHA believes the total estimated cost for FR clothing at an annualized cost of approximately $ per employee (based on 8 sets lasting 3+ years).

14. Managing Your Protective AR/FR Clothing Assets
Page 14 | © Magid
Managing Your Protective AR/FR Clothing Assets

15. Protective Clothing Selection Criteria
Page 15 | © Magid
Protection value
Cost effectiveness – Initial and life cycle cost
Appearance
Ease of care – Launderability and durability
Wearer comfort

16. Initial Cost vs Life Cycle Cost Garment A
Cost Effectiveness
Page 16 | © Magid
Initial Cost vs Life Cycle Cost
Garment A
Initial Cost: $25.00
Average Life Cycle: 1.5 years
Total cost/unit over 3 years: $50.00
Garment B
Initial Cost: $45.00
Average Life Cycle: 3 years
Total cost/unit over 3 years: $45.00
Cost savings over 3 years with shirts ea. = $5,000!

17. AR/FR Clothing Laundering Options
Page 17 | © Magid
Traditional rental programs
Direct purchase programs
Managed apparel programs
N.O.G (not our goods)
Lease and wash
Home laundering

18. Advantages of Rental Program
Page 18 | © Magid
No upfront costs
Garment replacement included in contract
Mending included in the contract
Insurance that the garment will be cleaned according to the manufacturer’s guidelines
Typically, 3 to 5 year commitment required

19. Advantages of a Direct Sale Program
Page 19 | © Magid
Complete control of change out to new garment
Home washing, employee must take ownership of the wash process
Flexibility
No contract required
No under – wash
Custom logo – enhanced image

20. Advantages of Managed Apparel Programs
Page 20 | © Magid
N.O.G. (Not Our Goods)
Direct purchase with a laundry service added
Lease and Wash
Leasing contract for the protective apparel from the industrial laundry company
Wash program attached to the leasing contract

21. Magid’s Response to the New Standards
Page 21 | © Magid
Magid’s Response to the New Standards

22. Magid’s Response to the Changes
Page 22 | © Magid

23. Magid FR screen print on back of garments
New Labeling
Page 23 | © Magid
Magid FR screen print on back of garments
Woven labels on pockets
Arc Rated NFPA 70E/ASTM F1506 compliant products for protection from exposure to arc flash
NFPA 2112 certified products for protection from exposure to flash fire

24. Safety at work™ Safety Expertise
Page 24 | © Magid
Safety Expertise
Confidence A 70- year history of solving the toughest safety challenges
Manufacturing Innovation
Productivity For unique safety challenges and low-cost advantage
Nationwide Distribution
Convenience Single source for head-to-toe PPE
Safety Services
Efficiencies Improving compliance and process efficiencies
Ensuring your workers are safe while you receive the best safety solutions at the best value

25. Download
Page 25 | © Magid
Infographic | New ARC Flash Standards magidglove.com/resources
Craig Howell Director of Clothing Cell:
Shop
Free Shipping On orders of $75 or More 120% Low Price Guarantee magidglove.com
Connect
Magid Blog blog.magidglove.com