1. EUROTHERM CONTROLS Series 2000 One range - All Solutions

2. EUROTHERM CONTROLS EUROTHERM TEMPERATURE CONTROL MEANS: PRECISION-Controlling the temperature value, response, and profile the application requires. INDUSTRIAL-Non domestic, non consumer, non office, but includes machinery, process, utilities etc. CONTROL-Means the primary Controlled Variable, temperature or process.

3. To expand the product offering. To add value for the customer through the most advanced performance and functionality. Reduce the long term cost of ownership. Offer a range with consistent programming hardware and control philosophy. Take advantage of current technology. Intrinsically comply with all current standards- EMC. EUROTHERM CONTROLS THE RATIONALE FOR SERIES 2000

4. EUROTHERM CONTROLS ALGORITHMS AND CONTROL FUNCTIONS lOne Shot Self Tune on all Models (even DIN32). lCutback on all Models-Automatically calculated in Autotune. lSpecialised cooling algorithms for water, oil etc. lAdaptive tune standard on 2400 series. lPower Feedback available as standard on 2200 & 2400 series- continuous monitoring of supply and adjusting of the output. Eliminates having to use the integral term to bring the PV back to SP after the event.

5. EUROTHERM CONTROLS MECHANICS l Full Family of Controllers and Programmers from DIN32 Through to DIN4. l Long Case- 150mm Depth. Short Case-103mm Depth. l Standard IP65 Sealing with integral panel seal. l DIN Sleeve mounting across the entire range (even DIN32). l IP20 Terminal protection internally and externally. l Common Front panel styling. l Welded rubber keypad. l Fine Ratchet DIN retention clip allowing wide panel thickness.

6. EUROTHERM CONTROLS INPUTS/OUTPUTS lStandard ASICS across the full range lDual Cold Junction measurements for Thermocouples-fast warm up lMultiplexed 4 channel input measurement. lSelf configuring inputs for mV, mA, T/Cs & Rtd's- Avoids hardware switch lBitstream (delta Sigma Modulation) for A-D conversion- Better stability, accuracy, repeatability, and bandwidth. Also allows simple isolation. lEach input can have primary and secondary variables- Allows I/O to be self diagnostic eg S/C and O/C

7. EUROTHERM CONTROLS INPUTS/OUTPUTS (CONT) lSupport PDSIO two Wire signalling (Pulse Density Signalling Inputs Outputs) lCalibration is self nulling- set for life. lHigh noise immunity as standard- conforms intrinsically with EC EMC requirements. lSample rates- 5 Hz- 2100 series. 9 Hz 2200 & 2400 series.

8. EUROTHERM CONTROLS ALARMS lAlarm Combination possible- Allows combination (OR) of alarm conditions onto one output. Software alarms still exist separately. lBlocking Alarms- especially on start. lRate of change alarm on 2400 series. lEvent Outputs with no flashing displays. lPDSIO- detects S/C and O/S in auxiliary equipment with necessary functionality.

9. EUROTHERM CONTROLS MAN MACHINE INTERFACE lCommon look and feel across the entire range. lIntuitive operation. lCustom green LED display - Maximum clarity and brightness on all models. lConsistent functions and navigation across the entire range. lTactile feedback. l4 button operation. l“Intelligent” fault diagnostics- Tells the operator what is wrong. lFlashing Display for alarm condition- No small fault LEDS.

10. EUROTHERM CONTROLS MEASUREMENT AND CONTROL lDelta Sigma Conversion- Linearity. lCompound Cold junction compensation. lPolynomial linearisation- Does not use look up tables for T/C, uses exact equation. lDigital Filtering.

11. EUROTHERM CONTROLS CONFIGURATION lVia Configuration Port- Powered or unpowered. lVia front panel. lVia Serial Link.

12. EUROTHERM CONTROLS TYPICAL INDUSTRIES Metal Processing Plastics and Rubber Aerospace Bricks and Ceramics Food Brewing Glass Textile Semi Conductor Petro Chemical Pharmaceutical Utilities Heating and Ventilation Automotive