1. Respiratory Protection- supplied air respirators Training on the use of respirators in the workplace – module 3 Developed by the Division of Occupational Safety & Health (DOSH) for employee training June, 2009

2. Supplied Air Respirators – Module 3 Airline Respirators & SCBAs 2

3. This module is introductory training for employees who wear supplied air respirators. The two main types of supplied air respirators are covered in this module. Abrasive blasting hoods or re-breather type respirators are not covered. This module only covers basic facts of supplied air respirators and is not complete training by itself. Employees must also be given hands-on training with the respiratory equipment they will use. 3 Training Notes

4. Training is required by WISHA for anyone who wears a respirator. We also are providing this training so you will know how to protect your health. If you don’t know how to use a respirator properly, you can get a false sense of protection. Why Is This Training Required? 4

5. Respirator Program Administrator Our respirator administrator is [name] This person is responsible for overseeing our respirator program. This person has training on respirators. 5

6. What are supplied air respirators? Two Types SCBA (self-contained breathing apparatus) – air from a tank Airline respirator – air from a compressor 6

7. Typical Examples of Use Sandblasting Firefighting Confined space work Chemical leak or spill response 7

8. Where we use supplied air respirators We use supplied air respirators in the following locations, jobs or situations: 8

9. Oxygen deficiency High levels of toxic chemicals in the air – above “IDLH” levels Other conditions of high levels of highly toxic chemicals in the air Firefighting Supplied-air respirators are required for protection in cases of: 9

10. What is Oxygen Deficiency? Normal air contains 21% oxygen. A space with oxygen content below 19.5% is “oxygen deficient”. Lack of oxygen can cause immediate collapse and death. Oxygen deficiency can occur in confined or enclosed spaces or areas of large chemical leaks. 21% 0% 19.5% Oxygen deficiency exists Oxygen content An oxygen deficiency can be life-threatening 10

11. Effects of Oxygen Deficiency % OxygenSymptoms 19.5% - 16%Fatigue, mild impaired coordination 16% - 12%Increased breathing rate and pulse; impaired coordination, perception or judgment 12% - 10%Further increased breathing rate, blue lips, mental confusion 10% - 8%Fainting, nausea, vomiting, mental confusion within minutes, collapse 8% - 6%Collapse, death within 8 minutes 6% - 0%Coma within 40 seconds, death 11

12. What is “IDLH”? Immediately Dangerous to Life or Health “IDLH” means immediately dangerous to life or health Many chemicals have a listed IDLH level link to NIOSH IDLH Tablelink to NIOSH IDLH Table Oxygen deficiency is also IDLH IDLH conditions can occur in confined spaces, large chemical spills or leaks and fires 12

13. Entering an IDLH Atmosphere Must have at least one or two standby persons at entrance. Standby employees must be trained to conduct emergency rescue. Appropriate retrieval equipment may be needed. Several safeguards must be used to enter an area with IDLH conditions: 13

14. Example of IDLH - Hydrogen Sulfide (H 2 S) Hydrogen sulfide gas is commonly found in sewers. It can be instantly fatal at higher levels in a confined space. IDLH level is 100 ppm. Disturbing sewage sludge can release more hydrogen sulfide gas. Supplied air respirators are normally needed to enter sewers. H 2 S in parts per million (ppm) 30200 2000 100 1000 Death in minutes Smell strong odor Instant collapse Coughing, red eyes Loss of smell 600 Unconscious in 30 min. 14

15. Escaping an IDLH Atmosphere In IDLH conditions, a worker may need to escape or immediately leave the area. An SCBA allows escape at any time. Airline respirators need a small escape bottle of air attached at the waist. Airline respirator with emergency escape cylinder 15

16. Escape-only Respirators Escape bottle attached to airline respirator system Carried escape respirator Escape-only respirators can be used in situations where chemical releases might occur, but the air is normally uncontaminated. 16

17. Respirator Air Pressure Air pressure inside the respirator facepiece is controlled by the respirator regulator. “Pressure-demand” means air flows into the facepiece as needed, but the facepiece is always positively- pressured. “Demand” means air flows into the facepiece only when you inhale. Only pressure-demand can be used in IDLH conditions. Pressure Demand vs. Demand 17

18. Air Flow in Supplied Air Respirators “Continuous flow” means air is constantly blowing into the respirator facepiece. Continuous flow is found in loose-fitting airline respirators. This type is often more comfortable and hoods can be worn over a beard. This type cannot be used in IDLH conditions. Continuous flow airline respirators Loose-fitting hood Loose-fitting facepiece 18

19. Supplied Air Respirator Selection IDLH conditions or oxygen deficiency SCBA or airline with escape bottle Dust/chemical levels up to 1000 times PEL Airline with tight-fitting full facepiece or full hood Dust/chemical levels up to 50 times PEL Airline with tight-fitting half facepiece Dust/chemical levels up to 25 times PEL Airline with loose facepiece Conditions Type of Respirator 19 PEL = permissible exposure limit

20. Airline Respirator Advantages & Limitations Advantages – continuous air supply, lightweight, less maintenance, don’t need to buy tank air Limitations- tied to a 300 ft. hose, depends on output of compressor, need an attached escape bottle in IDLH conditions 20

21. SCBA Advantages & Limitations Advantages highest form of protection, can be used anywhere, allows unrestricted mobility Limitations heavy & bulky, limited air supply(30 - 60 min.), extensive training required, high maintenance 21

22. Using SCBAs – Special Notes SCBAs are sophisticated respirator equipment used for possible or actual life-threatening situations. SCBAs should not be used without extensive hands-on training and frequent re-training. Most SCBA manufacturers or distributors provide this training. If you have large chemical spill or leak, it may be safer to call professional emergency responders. 22

23. Air Quality For SCBAs Air for breathing must be “Grade D” air Grade D air for tanks is usually purchased from a specialized supplier. Grade D air must meet strict requirements. link to WISHA requirementslink to WISHA requirements Supplier must certify that tank air meets Grade D requirements. 23

24. Air Quality for Airline Respirators Air compressors must deliver clean air Locate pump intake in an area of clean, fresh air. Filter air as needed. Watch out for nearby running engines. Be sure air intakes are located away from exhaust pipe of an engine compressor. Small electric air pump Small engine compressor 24

25. Compressors for Airline Respirators Three types of breathing air compressors Gasoline high pressure air compressor Electric low pressure compressor Electric high-pressure air compressor 25

26. Construction & Plant Air Compressors Be careful – these do not provide clean air without a filter system!! Oil-lubricated compressor are especially hazardous. Must test for carbon monoxide or have high temperature alarm. Engine exhaust can also contaminate breathing air. Use these compressors with caution 26

27. Compressor Air Filters What air filters are needed on compressors? Moisture trap Dust filter Hydrocarbons(oil, solvents) absorbent Carbon monoxide alarm or high- temp. alarm for oil-lubricated compressors compressor filters carbon monoxide alarm 27

28. Compressors We Use [Discuss compressors you use here] 28

29. Storage and Maintenance Airline Respirators Store facepiece and regulator in clean, dry place. [location] Coil up hose and store in protected area to prevent damage. Clean as needed before storage – especially the inside of the facepiece. Inspect facepiece and hose for damage and replace as needed. 29

30. Supplied air respirator repairs Keep spare parts available. Tag damaged respirators to prevent use. Repair of SCBA valves, regulators or alarms can only be done by manufacturer’s trained person. 30