1. Semi-Topless There are many ways of going semi- topless, let your imagination run wild! This means you still retain some of your airbox cover, that houses the temp. sensor. This is how I did mine.

2. Semi-Topless Temp sensor (removed from lid) Cut as much of plastic away as you want. Cut a slot for PCIII cable

3. Semi-Topless Install PCIII as shown using double sided tape. The slot you cut was to accommodate the cable shown. Next slide shows air temp sensor refilled to airbox. (Initially I had it here (free) so I could change configurations quickly.)

4. Semi-Topless