1. Cook Stove for Haiti Project 11461 Jordan Hunter Rob Reid Mike Lagos Brian Knight Stove Construction

2. Functioning Stove Design Annulus Fan Pot & Water Packed Bed of Charcoal Orifices Combustion Air Flow Dia. Stovem0.2794 Dia. Combustion Chamberm0.1778 # of Holes in Chamber#22 Height of Chamberm0.1778 Height of Stove w/o annulusm Volume of Chamberm3m3 0.004735492 Volume of Stove-Chamberm3m3 Fan PowerW1 Dia. Of Potm0.2921 Area of fanm2m2 0.005026548 Height of Annulusm0.2032 Width of Annulusm0.01 Area of single Hole in Chamberm2m2 0.000126677 Radius of single holem0.00635

3. Layout of Parts on Flat Drum

4. Assembly Notes Grind paint off of all edges that are to be welded. Drill Orifice holes 2.54 cm up from bottom of combustion chamber. Annulus gap around pot is.5cm wide. Bottom of stove is welded 1.27cm deep into base. Cut 8.89 cm deep by 10.16 cm long rectangle out of Base and outside chamber. Example shown in drum layout on previous page. Handles are to be cut from top ring of drum that is holding the cover on. Air inlet to stove should be fabricated to fit after outer chamber and base are welded. This ensures pieces will fit correctly.

5. Stove Assembly