Download presentation
Presentation is loading. Please wait.
1
1 High Performance Computing at SCEC Scott Callaghan Southern California Earthquake Center University of Southern California
2
Why High Performance Computing? What is HPC? –Using large machines with many processors to compute quickly Why is it important? –Only way to perform large-scale simulations Two main types of HPC SCEC projects –What kind of shaking will this eq cause in a region? –What kind of shaking will this single location experience? 2
3
3 SCEC Scenario Simulations Simulations of individual earthquakes –Determine shaking over a region caused by a single event (usually M > 7) Peak ground velocities for a Mw8.0 Wall-to-Wall Scenario on the San Andreas Fault (1Hz) calculated using AWP-ODC on NICS Kraken.
4
4 Simulating Large Events Must break up the work into pieces –Most commonly, spatially –Give work to each processor –Run a timestep –Communicate with neighbors –Repeat As number of processors increases, harder to get good performance
5
5 Probabilistic Seismic Hazard Analysis Builders ask seismologists: “What will the peak ground motion be at my new building in the next 50 years?” Seismologists answer this question using Probabilistic Seismic Hazard Analysis (PSHA) –PSHA results used in building codes, insurance –California building codes impact billions of dollars of construction yearly
6
6 PSHA Reporting PSHA information is relayed through –Hazard curves (for 1 location) –Hazard maps (for a region) Probability of exceeding 0.1g in 50 yrsCurve for downtown LA 2% in 50 years 0.6 g
7
77 PSHA Methodology 1.Pick a location of interest. 2.Define what future earthquakes might happen. 3.Estimate the magnitude and probability for each earthquake, from earthquake rupture forecast (ERF) 4.Determine the shaking caused by each earthquake at the site of interest. 5.Aggregate the shaking levels with the probabilities to produce a hazard curve. Repeat for multiple sites for a hazard map. Typically performed with attenuation relationships.
8
8 CyberShake Approach Uses physics-based approach –3-D ground motion simulation with anelastic wave propagation –Considers ~415,000 rupture variations per site 7000 ruptures in ERF <200 km from site of interest Magnitude >6.5 Add variability –More accurate than traditional attenuation methods 100+ sites in Southern California needed to calculate hazard map LADT: Probability of Exceedance (SA 3.0) Blue and Green – common attenuation relationships Black – CyberShake
9
9 Results Attenuation mapCyberShake map
10
10 Results (difference) CyberShake map compared to attenuation map Population Density
11
11 Some recent numbers Wall-to-wall simulation –2 TB output –100,000 processors CyberShake –Hazard curves for 223 sites –8.5 TB output files –46 PB of file I/O –190 million jobs executed –4500 processors for 54 days
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.