1. The Comfort System
Product Presentation
The Intelligent Home System

2. What is Comfort?
Comfort - an Intelligent Home System which integrates Alarm, Home Automation, Answering Machine, and Intercom.

3. Operating Comfort

4. Scene Control Switch
Each Scene switch has 4 buttons and indicator LEDs
Buttons can be programmed to control lights, appliances, or set scenes
LED indicators indicate status of items
Optional IR receivers allow handheld remote control to control the house

5. Comfort Keypad One-touch keys to Arm to Away, Night, Day modes
Short Cut Function Keys
Voice Menu to guide user through
all operations

6. Operating Comfort by Telephone
Use your PIN code to gain access
Call in to Comfort from any mobile phone wherever you are.
This is the most convenient method as no special equipment is needed, only a phone.
A Voice menu guides you through all operations.

7. Using A Handheld Remote Control
A handheld Touchscreen remote controller can be used to control Comfort
Hundreds of levels of screens for lighting scenes, Air-conditioning, Home Entertainment, security and many more.
Philips Pronto
Next Page

8. RC01 Handheld Remote Control
New Low cost RC01 handheld remote control
Just point the remote control at any Keypad or Scene switch

9. RC01 Handheld Remote Control
Operation Keys function depending on the Room Key
Room Keys select a Room or appliance
Scene Buttons 1 to 12
Pressing both buttons causes a PANIC alarm
4 additional Scenes A to D
Remote Keypad – works as a keypad when pointed at a KP02 keypad

10. Controlling Comfort from the Internet
Comfort Network Interface Unit to connect to a LAN or via dial-up to the Internet
Use any browser to access Comfort from anywhere!

11. Comfort on a Home Network

12. Home Automation

13. Comfort Automation Lighting
TWS Lighting Control Modules work with 2-way switches for on-off relay control of lighting,. 2-way switches work even when Comfort is switched off.
For high-end lighting, Comfort is able to integrate with EIB (European Installation
Bus) and C-BUS systems using bus-wiring, or Lutron using infrared signals.

14. Comfort Automation- X10-Compatible
Comfort can send and receive X10 commands, ie
it has 2-way X10 communications (using X10 TW7223).
Comfort can send the new Extended commands e.g. preset dim.
Comfort can receive X10 commands from X10 switches and controllers to activate Responses to trigger non-x10 devices or scenes
The new Comfort Scene Switches and RIO Modules can send X10 signals from IR remote control

15. Comfort Automation
Integration
is the key

16. Comfort Automation Voice Menu
Voice menu over the phone gives list of appliances - no need to remember activation codes
It is not necessary to wait for the voice menu to finish once you are familiar.

17. Comfort Automation 16 Time Programs available
Each Time Program can be activated for any combination of Days of Week or holiday, and at any programmed time.
Time Programs can arm or disarm the security system, or control one or more appliances

19. Security Off - system is not armed, but 24 hour zones are active
Away Mode - when everyone is out - all zones are protected, phone cannot answer calls or dial.
Vacation Programs - cause lights, TV, radio can turn on and off semi-randomly giving impression the house is occupied

20. Day Mode to protect the perimeter doors and windows
Day Mode to protect the perimeter doors and windows. Internal zones are inactive - arm to day if people are in the house, but awake, e.g. watching TV
Night Mode to protect all zones except designated zones - arm to Night when occupants go to bed.

21. can dial up to 8 numbers which may be cellular phones, pagers, or Alarm Monitoring Centers or SMS (with GSM Module).
Dial to Voice phone - announces Alarm Type and allows the user to track the intruder, or listen to sounds in the home through the keypad.

22. Fire alarm can light up exit path
The Security System may be linked to Lights and appliances in the home, for example
Fire alarm can light up exit path
Intruder alarm in Away mode (no one at home) can cause house lights to flash on/off
Lights turn on in the area where intruder was detected, and zone is announced on keypad.

23. Opening door at night can turn on hall light
Arming to Away can turn off all lights and airconditioners.
Activation of outside PIR can trigger a user-recorded warning message

25. Press a key to record a message when going out
Users enter their PIN code to hear their recorded messages
MSG led turns on when there are new messages

26. Up to 8 personal mailboxes for members of the family
Each mailbox is accessed by User code
User-recorded greeting Message (OGM)

27. 10 minutes of messages saved in nonvolatile memory
Message memory is maintained even after total power shutdown and removal of battery.

28. User can choose to have Comfort call a pager to notify that a new message has been received. The user can call back to hear the message.
Or forward new messages to their cellphone, to hear the new message as soon as it is received.

30. Home LED - steady when not armed, flash for trouble (line cut, AC fail, battery low)
ARM LED - steady for armed, flash for alert or alarm state
AC - Off if AC OK, steady for power failure, flash for low battery
MSG - steady for new message from user, flash for new message from incoming call.
MIC - Steady if Mic is on (recording or listen)

31. One-touch keys to arm to Away, Day, and Night Modes
2 key combinations for Fire and Panic

32. Short-cut keys for common operations

33. Any keypad can intercom to any other keypad
Broadcast or individual keypad select modes
Keypad can act as a Baby Monitor

34. Any telephone in the house can be used to talk to the Door Station
When armed to Away Mode, Comfort dials to a programmed phone so user can talk to the visitor
User can open the door or gate to let the visitor in (2 doors can be controlled)

35. Built-in Resettable Fuse for Lightning surge protection on the telephone line
Individual surge protection for ALL inputs and outputs
Rugged Power supply with surge protection