1. ACL800 Series The Alliance of Design and Security
Mini Surface and Flush mount range
ACL800 Series The Alliance of Design and Security

2. The readers: Surface mount (2 colours)
3D rotation view
Mounting steps

3. The readers: Flush mount (3 colours)
Create your own combination of front plates and electronics:
3 (Dark Gray/Silver/White) different front plates for 5 different electronics

4. The readers: Flush mount
TAILOR-MADE PRODUCTS: they are compatible with single gang flush back boxes, making installation simple.
3D mounting
ACL870W ACL800-RDREM
Controller
Possibility to connect a master reader to a slave reader to get a double technology

5. A new access control range
TAILOR-MADE PRODUCTS: they are compatible with single gang flush back boxes, making installation simple (flush mount range)
COLOURS: Available in different colours to match surroundings and different types of building
HOUSINGS OR FRONT PLATES: same housing and front plate for the three technologies (Mifare, Proximity & Stand-Alone Relay)
LARGE RECTANGULAR LED:
A key defining feature of the range is the multi-colour rectangular status LED. The proximity reader’s change colour depending on whether the user’s key fob is accepted (green) or denied (red). The exit switch within the range is touch sensitive and also has the multi-colour notification - whether the door is closed (red) or open (green)
The new products with large rectangular status LEDs are designed to overcome the difficulty people may have in locating exit buttons when leaving a building

6. Reader Compatibility & Technology
Versions available
13,56 Mhz Mifare readers
Mifare Classic CSN 4byte & 7 byte
Mifare DESFire EV1 CSN 7 byte
Mifare Lite CSN 7 byte
125 Khz Proximity readers
CASI Rusco Proximity (EM) as used on TruPortal
Versions with interface
Wiegand interface
Stand-alone Relay interface
Configuration of different formats
26 Bit / 34 Bit / 58 Bit: selectable either via Config Card or Switches depending on model
LED control: selectable via Config Card or Switches depending on selected model

7. Standalone Keypads: ACL870 & ACL870DIN
ACL870-SILV
colour ref.: Silver
Features
ACL870W
ACL870DIN
Mounting:
Surface
Electrical flush back box
Housing:
Moulded Aluminium
ABS
Colour:
Silver and Gray
Keys:
Backlit Metallic
Resin potted electronic:
Yes (with 1m cable) No
Outputs:
1 Relay (2A) & 1 Transistor (250mA)
2 Relays (3A/24V DC,
230V AC)
Master code (programming): 1
User codes: 99
Relay time:
Latching or timed from 1 to 99 seconds
Push to exit button input:
Memory:
EEPROM (Keep programming safe even in case of power-cut)
Green LED:
Output 1 status
Red LED:
Output 2 status
Orange LED:
Programming status and Key Press
Keypad blocking:
For 30 seconds with beep noise after 8 consecutive incorrect codes
Buzzer:
Anti-tamper:
When open or dismantled
Consumption:
30mA in Stand-by. Max. 100mA
Max. 120mA
Power:
Automatic power seclect 12-24V DC; 15-24V AC
IP rating: 65 40
Dimensions (mm):
92x51x25
80x80x9
ACL870-GRAY
colour ref.: Gray
ACL870DIN + ACL800DIN-SILV
colour ref.: Silver
ACL870DIN + ACL800DIN-GRAY
colour ref.: Gray

8. Network Keypads: ACL870W & ACL870DINW
ACL870W-SILV
colour ref.: Silver
Features
ACL870W
ACL870DINW
Mounting:
Surface
Electrical flush back box
Housing:
Moulded Aluminium
ABS
Colour:
Silver and Gray
Keys:
Backlit Metallic
Resin potted electronic:
Yes (with 1m cable) No
Communication Protocols:
Compatible with Wiegand 26, 30, 34, 40, 42, 58 bit, Clock & Data or 8bit per key
Green LED:
Externally controlled
Red LED:
Orange LED:
Programming status
Buzzer: 1
Anti-tamper protection:
When open or dismantled
Consumption:
70mA
Power:
9-14V DC
Illumination:
Blue backlight (programmable on/off control)
IP Rating: 65 40
Operating Temperature.
-20ºC to +50ºC
Dimensions (mm):
92x51x25
80x80x9
ACL870W-GRAY
colour ref.: Gray
ACL870DINW + ACL800DIN-SILV
colour ref.: Silver
ACL870DINW + ACL800DIN-GRAY
colour ref.: Gray

9. Network 125 Khz EM Proximity Readers: ACL800-RDREM & ACL800DIN-RDREM
ACL800-RDREM-GRAY
colour ref.: Gray
Features
ACL800-RDREM
ACL800DIN-RDREM
Mounting:
Surface
Electrical flush back box
Housing:
Moulded Aluminium
ABS
Colour:
Silver and Gray
Resin potted electronic:
Yes (with 1m cable) No
Communication Protocols:
Wiegand 26, 34, 42 bits
(jumper selection)
Proximity reading type:
Casi Rusco
Reading distance:
2 to 5cm
Max. 8cm
Green LED:
Potential Free
Red LED:
Orange LED:
Idle mode
Buzzer: 1
Anti-tamper protection:
When open or dismantled
Consumption:
20mA in stand-by, Max 35mA
Max. 45mA
Power:
9-14V DC
IP Rating: 65 40
Operating Temperature.
-20ºC to +50ºC
Dimensions (mm):
92x51x25
80x80x9
ACL800-RDREM-SILV
colour ref.: Silver
ACL800DIN-RDREM + ACL800DIN-SILV
colour ref.: Silver
ACL800DIN-RDREM + ACL800DIN-GRAY
colour ref.: Gray

10. Network 13,56 Mhz Mifare Proximity Readers: ACL800-RDRMF & ACL800DIN-RDRMF
Features
ACL800-RDRMF
ACL800DIN-RDRMF
Mounting:
Surface
Electrical flush back box
Housing:
Moulded Aluminium
ABS
Colour:
Silver and Gray
Resin potted electronic:
Yes (with 1m cable) No
Communication Protocols:
Wiegand 26, 34, 58 bits
(programmable by card)
Proximity reading type:
Mifare Clasic, Mifare Ultralight, Mifare Desfire (13,56MHz)
Reading distance:
1 to 3cm
Max. 6cm
Green LED:
Potential Free
Red LED:
Orange LED:
Idle Mode
Buzzer: 1
Anti-tamper protection:
When open or dismantled
Consumption:
Max 110mA
Max. 150mA
Power:
9-14V DC
IP Rating: 65 40
Operating Temperature.
-20ºC to +50ºC
Dimensions (mm):
92x51x25
80x80x9
ACL800-RDRMF-GRAY
colour ref.: Gray
ACL800-RDRMF-SILV
colour ref.: Silver
ACL800DIN-RDRMF + ACL800DIN-SILV
colour ref.: Silver
ACL800DIN-RDRMF + ACL800DIN-GRAY
colour ref.: Gray

11. Sensitive Push Button: ACL800-PB & ACL800DIN-PB
ACL800-PB-SILV
colour ref.: Silver
Features
ACL800-PB
ACL800DIN-PB
Mounting:
Surface
Electrical flush back box
Housing:
Moulded Aluminium
ABS
Colour:
Silver and Gray
Technology:
Touch sensitive
Backlighting:
Green (Door opened) – Red (Door Closed)
Exit:
Relay 1A (NO/C/NC)
Relay output:
On/off or Timed (3, 5 or 10 seconds)
Visual and Sound Signals:
Complete button lighting + buzzer
Wiring:
1m cable
Terminal block
Consumption:
Min. 45mA, Max 80mA
Max. 65mA
Power:
12-24VDC; 15-24VAC
IP Rating: 65 40
Operating Temperature.
-20ºC to +50ºC
Dimensions (mm):
92x51x25
80x80x9
ACL800-PB-GRAY
colour ref.: Gray
ACL800DIN-PB + ACL800DIN-GRAY
colour ref.: Gray
ACL800DIN-PB + ACL800DIN-SILV
colour ref.: Silver

12. Partnumbers – Flush Mount
Type
Interface
Mounting
Description
ACL800DIN-RDREM
Rdr 125 Khz
Wiegand
Flush Mount
EM Flush mount Reader - Wiegand
ACL800DIN-RDRMF
Rdr 13,56 Mhz
Mifare Flush mount Reader - Wiegand
ACL800DIN-PB
Push Button
Capacitive Flush Mount Push Button
ACL870DIN
Keypad
Relay
Standalone Flush Mount Keypad
ACL870DINW
Wiegand Flush Mount Keypad
ACL800DIN-GRAY
Colour Frame
Dark Gray Single Frame
ACL800DIN-SILV
Silver (Light Gray) Single Frame
ACL800DIN-WHT
White Single Frame

13. Partnumbers – Surface Mount
Type
Interface
Mounting
Description
ACL800-PB-GRAY
Push Button
Surface Mount
Gray Surface Mount PB
ACL800-PB-SILV
Silver Surface Mount PB
ACL870-SILV
Keypad
Relay
Silver Surface Mount Standalone Keypad
ACL870-GRAY
Dark Gray Surface Mount Standalone Keypad
ACL870W-SILV
Wiegand
Silver Wiegand Surface Mount Keypad
ACL870W-GRAY
Dark Gray Wiegand Surface Mount Keypad
ACL800-RDREM-SILV
Rdr 125 Khz
Silver EM Surface mount Reader
ACL800-RDREM-GRAY
Dark Gray EM Surface mount Reader
ACL800-RDRMF-SILV
Rdr 13,56 Mhz
Silver Mifare Surface mount Reader
ACL800-RDRMF-GRAY
Dark Gray Mifare Surface mount Reader

14. Configuration cards & Usage
Configuration cards can be used to toggle between the reader modes
Two separate cards are made available
Configuration card1: Wiegand Output, by default it is 26 bits
Switch ON the Reader and the reader will blink in orange, indicating that is waiting for the programming cards (Wiegand or Backlight Card)
2. In the next 60 seconds, present the Wiegand card. 1 beep + 1 blink indicates that the reader is programmed in Wiegand 26 bit.
3. Present the Wiegand Card again and 2 beeps + 2 blinks indicates that the reader is programmed in Wiegand 34bit.
4. Present the Wiegand Card again and 3 beeps + 3 blinks indicates that the reader is programmed in Wiegand 58bit.
Configuration card2: LED control

15. Programming of Relay Output Version