1. Simply easy! TM XUSL4E light curtain - cabling - How to replace the obsolete XUSLB/D by the new XUSL4E and re-using the old cabling - Old & new parts use the same M12 5 or 8-pin connectors and the same conductor number (difference = colour) - Wires need to be changed on the 24Vdc power supply

2. Telemecanique Sensors 2 - Technical Support – April 17 th, 2015 Obsolete XUSLD/B light curtain ●Cabling details in the stand-alone solution

3. Telemecanique Sensors 3 - Technical Support – April 17 th, 2015 Obsolete XUSLD/B light curtain ●XSZBCR/T pre-wired connector pin-outs

4. Telemecanique Sensors 4 - Technical Support – April 17 th, 2015 New XUSL4E light curtain ●Cabling details in the stand-alone solution

5. Telemecanique Sensors 5 - Technical Support – April 17 th, 2015 New XUSL4E light curtain ●Pre-wired connector pin-out ●Receiver connections

6. Telemecanique Sensors 6 - Technical Support – April 17 th, 2015 New XUSL4E light curtain ●Pre-wired connector pin-out ●Transmitter connections

7. Telemecanique Sensors 7 - Technical Support – April 17 th, 2015 New XUSL4E light curtain ●Correspondance table to connect the XUSLB/D cabling to the new XUSL4E ●Receiver M12 8-pin Pin nb Old pre-wired connector New pre-wired connector 1Brown BNWhite 2Blue BU Brown 3Green GNGreen 4White WHYellow 5Yellow YEGrey 6Red RDPink 7 Blue 8Black BKRed

8. Telemecanique Sensors 8 - Technical Support – April 17 th, 2015 New XUSL4E light curtain ●Correspondance table to connect the XUSLB/D cabling to the new XUSL4E ●Transmitter M12 5-pin Pin nb Old pre-wired connector New pre-wired connector 1Blue BUBrown 2Brown BN Black/White 3White WHBlue 4Black BKBlack 5Green GNYellow/Green or Red

9. Telemecanique Sensors 9 - Technical Support – April 17 th, 2015 New XUSL4E light curtain ●Wire connection changing on the 24Vdc power supply ●M12 8-pin connector (receiver) Pin nb Old pre-wired connector (color) Old connectionNew connection 1Brown BN24VK2 load - 0V 2Blue BU0V 24V 3Green GN GND (FE connection) K1 load - 0V 4White WHK2 load - 0VFeedback – 24V 5Yellow YE24V or 0V0V 6Red RDFeedback - 0V24V 7PinkPLC input0V 8Black BKK2 load - 0V GND (FE connection)

10. Telemecanique Sensors 10 - Technical Support – April 17 th, 2015 New XUSL4E light curtain ●Wire connection changing on the 24Vdc power supply ●M12 5-pin connector (transmitter) Pin nb Old pre-wired connector (color) Old connectionNew connection 1Blue BU0V24V 2Brown BN24VNo changing 3White WHTest loop0V 4Black BKTest loop0V 5Green GN GND (FE connection) No changing

11. Telemecanique Sensors 11 - Technical Support – April 17 th, 2015 New XUSL4E light curtain ●XUSL4E wired with the old XUSLB/D pre-wired M12 connectors