Download presentation
Published byEugenia Jefferson Modified over 9 years ago
1
Information. Insight. Influence. securityindustry.org
2
SIA OSDP Profile Drafts
Information. Insight. Influence. securityindustry.org
3
SIA OSDP Profiles – Basic Reader
[Description] A reader that supports basic current OSDP commands [Standards] Reader to Panel communications using bi-directional RS-485 at 9600 to 115kb. OSDP v2.1.6 (OSDP 2.1.7) [Optional Features] Secure OSDP Bi-directional RS-485 communications. Keypad Entry Text Display Information. Insight. Influence. securityindustry.org
4
SIA OSDP Profiles – Federal Government Description
[Description] A Peripheral Device (PD) that conforms to functions necessary to perform Federal Identity, Credentialing and Access Management (FICAM) applications. These requirements are informed by officially published GSA Approved Products List (APL) testing and certification guidance. Please Note: The FICAM APL PACS testing and certification program is a comprehensive end-to-end process that is yet to be completely finalized. Conformance to either method in this OSDP profile does not guarantee acceptance to the FICAM APL. This can be achieved through various modes: [Transparent Mode] [Extended Packet Mode] Information. Insight. Influence. securityindustry.org
5
SIA OSDP Profiles – Federal Government: Standards and Options
OSDP v2.1.6 (2.1.7) Reader to Panel communications using bi-directional RS kb or greater. NIST FICAM PACS Master Test Procedures Section 1.3 FICAM APL-2 Certification Guidance ISO [Optional Features] Secure OSDP Bi-directional RS-485 communications. Keypad Entry Text Display Information. Insight. Influence. securityindustry.org
6
SIA OSDP Profiles – Biometric Verification
[Description] A device that supports current OSDP commands for the verification of a biometric template. [Standards] Reader to Panel communications using bi-directional RS-485 at 9600 to 115kb. OSDP v2.1.6 (OSDP 2.1.7) [Optional Features] Secure OSDP Bi-directional RS-485 communications. Keypad Entry Text Display Information. Insight. Influence. securityindustry.org
7
Security Industry Association
SNMP Standards Development Sub-Committee Initial Scope Review Information. Insight. Influence. securityindustry.org
8
Charter Goals Deliver a turnkey implementation method to ensure the standardized management of any physical security IP based device. Use industry standard, readily accepted and implemented to prevent proprietary forced usage requirements, allowing benefit to the customers who buy these devices. Platform agnostic approach to enable monitoring these devices. Easy to understand and implement. Promote the use of SIA as a repository and reference for all devices compliant with the standards. Information. Insight. Influence. securityindustry.org
9
IETF SNMP Standards Internet Engineering Task Force
Founded in 1986 by US Government Researchers Evolved into a standards development function in 1993. Widely accepted industry standards body with regards to SNMP utilization and definition Information. Insight. Influence. securityindustry.org
10
Standard RFC/OID Implementation Guideline
RFC to be implemented in its full capacity, not just in parts. All OID’s must be readable. Where possible, utilize no less than SNMP V2C SNMP V3 security is preferable to ensure the protection of data available. Any OID’s defined as writable by the SNMP standard shall be implemented as writable on all devices. Information. Insight. Influence. securityindustry.org
11
Proposed Usage - IETF RFC’s
RFC 1213 – MIB for Network Management of TCP/IP Based Internets RFC 2863 – Interface Group MIB RFC 4022 – MIB for Transmission Control Protocol RFC 2790 – Host Resource MIB RFC 4293 – MIB for Internet Protocol RFC 2465 – MIB for IP Version 6 Information. Insight. Influence. securityindustry.org
12
The Role of IoT in Security Standards
Steve Van Till CEO, Brivo Systems Chairman, SIA Standards
13
Four Megatrends Affecting Security
Data IoT Mobile Social
14
Internet of Everything
Internet of Things Internet of Everything Industrial Internet of Things
16
How does IoT change security?
#GOOD #BAD More smart devices More data New standards Better analytics Early warnings More things to hack More privacy threats Compatibility risks Data overload Signal-to-noise
17
An anti-hero who can hack into the physical infrastructure
#UGLY An anti-hero who can hack into the physical infrastructure to obtain and control information or to destroy such devices completely.
18
What jobs will IoT do for security?
Sensing Controlling Identity
19
Source: How Smart, Connected Products Are Transforming Competition
by Michael Porter and James E. Heppleman Harvard Business Review, November 2014
20
The Goal of IoT Standards
To create interoperable products that can discover, connect, and interact directly with other nearby devices, systems, and services regardless of transport layer, device type, platform, operating system, or brand. - AllSeen Alliance
21
Who’s Creating IoT Standards?
23
SIA Standards in Context
SNMP (MIB) Model: an industry profile for an extensible framework An ‘Internet’ (IP) standard (the I in IoT) Common heritage to (some) IoT initiatives As a MIB, has a role in many types of systems
24
SIA Standards in Context
OSDP Model: industry-specific standard for industry-specific need Shifting from local/wired (RS-485) to IP Opportunity: broader use and an Internet (IP) standard?
25
SIA Standards Role in IoT Standards Development?
26
One Thing We Don’t Want To Do
27
Possible Roles & Responses
Educate SIA members about IoT standards Educate IoT communities about SIA members Join IoT organizations Outreach to IoT players Contribute to IoT standards Create an industry-specific IoT framework
28
Thank You Thank You Steve Van Till Steve Van Till President & CEO
Brivo Systems Thank You Steve Van Till President & CEO, Brivo Systems Chairman, SIA Standards
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.