Presentation is loading. Please wait.

Presentation is loading. Please wait.

Transport Calculations 123456n Advection Dispersion 123456n Reaction 123456n.

Similar presentations


Presentation on theme: "Transport Calculations 123456n Advection Dispersion 123456n Reaction 123456n."— Presentation transcript:

1 Transport Calculations 123456n Advection Dispersion 123456n Reaction 123456n

2 ADVECTION Cells are numbered from 1 to N. Index numbers (of SOLUTION, EQUILIBRIUM_PHASES, etc) are used to define the solution and reactants in each cell SOLUTION 0 (or N+1) enters the column Water is “shifted” from one cell to the next

3 ADVECTION TRANSPORT adds dispersion, stagnant zones, and heat transport

4 ADVECTION Number of cells Number of shifts If kinetics—time step

5 ADVECTION Output file –Cells to print –Shifts to print Selected-output file –Cells to print –Shifts to print

6 T.1.Exercise 1.Run the Oklahoma simulation in a 10-cell column. a. Change the log K to –15 for the following two surface complexation reactions: Hfo_wOH + Mg+2 = Hfo_wOMg+ + H+ Hfo_wOH + Ca+2 = Hfo_wOCa+ + H+ b. Initial conditions: equilibrate the following brine with calcite and dolomite.

7 T.1.Exercise (continued) c. Initial conditions: Equilibrate 1 mol of exchanger with the reacted brine and place in each cell of the column. d. Initial conditions: Equilibrate 0.07 mol of surface complexation sites with the reacted brine. Assume 600 m^2/g specific surface area and 30 grams of sorbing material. Place the surface in each cell of the column. e. Define evaporated rainwater with the following composition:

8 T.1.Exercise (continued) f. Assume the rainwater reacts with calcite and dolomite in the soil zone and the soil zone pCO2 = 10^-1.5. This water flows into the column. g. Replace half the pore volume of the column with the infilling water. h. Plot pH, Cl (mol/kgw) and total dissolved As (ug/kgw) versus cell number.

9 T.2.Questions 1.Describe the Cl- profile in the column at the end of the simulation. 2.Describe the pH profile in the column at the end of the simulation. 3.What is the pH at which arsenic appears to become a problem?

10 TRANSPORT Cell lengths Velocity=length/time step! Dispersivities

11 TRANSPORT Boundary conditions Flow direction Diffusion coefficient Heat

12 TRANSPORT Stagnant cells/dual porosity -One stagnant cell -Multiple stagnant cells

13 PHAST 3D Flow model PHREEQC chemistry Capabilities –Specified, leaky, flux boundary conditions –Water table/confined –Wells –Rivers Sequential iteration –Transport all elements conservatively –Run reactions in each cell –Repeat

14 PHAST All the data for flow model—porosity, hydraulic conductivity All the data for solute transport model— dispersivity, boundary conditions All the data for chemistry –Apply initial conditions by index numbers of PHREEQC –Associate solutions by index numbers for boundary conditions

15 PHAST Flow and transport file –Keyword driven input –Same input style as PHREEQC Chemistry data file –Exactly a PHREEQC input file

16 FLOW ANDTRANSPORT DATA FILE GRID -uniform x 0 90000 16 -uniform y 0 48000 9 -uniform z 0 400 5 MEDIA -zone 0. 0. 0. 90000. 48000. 400. -porosity 0.22 -long_dispersivity 4000. -trans_dispersivity 50. -Kx 1.373e-5 -Ky 1.373e-5 -Kz 1.373e-7 -storage 0

17 FLOW-AND-TRANSPORT DATA FILE FLUX_BC -zone 30000. 3000. 400. 90000. 45000. 400. -flux -10e-5 -associated_solution 1 SPECIFIED_VALUE_BC # Lake Stanley Draper -zone 30000. 14000 300. 32000. 20000. 400. -head 348. -associated_solution 1 LEAKY_BC -zone 0. 48000. 0. 29000. 48000. 400. -hydraulic 1.618e-5 -thickness 30000. -head 305.0 -associated 1 CHEMISTRY_IC -zone 0. 0. 0. 90000. 48000. 400. -solution 2 -equilibrium_phases 2 -exchange 2 -surface 2

18 MODELVIEWER Show —select items to be present in the visualization Solid/None Model features Grid lines Color bar

19 MODELVIEWER Tools —select menus by which you can change the look of the features selected by Show. Data Color bar Geometry Model features Crop Animation

20 Buttons Left mouse—3D rotate Shift Left mouse—2D rotate in plane of screen Middle mouse—Drag Right mouse—Grow and shrink

21 MODELVIEWER

22 T.2.Exercise 1.Run phast from a command prompt in the directory Friday\phast.ok phast ok 2.Start ModelViewer 3.File->Open Friday\phast.ok\ok.mv 4.Use ModelViewer to make an animation of the evolution of arsenic in ground-water chemistry in Central Oklahoma


Download ppt "Transport Calculations 123456n Advection Dispersion 123456n Reaction 123456n."

Similar presentations


Ads by Google