Download presentation
Presentation is loading. Please wait.
1
ADSP-BF533 EZ-Kit Lite (Summit ICE Connection) Installation in ICT320
2
Pre-Installation Connect the ADSP-BF533 board to the PC using the 14-pin JTAG cable (do not force, notice that pin 3 is missing on the board) Connect the ADSP-BF533 board to the PC using the 14-pin JTAG cable (do not force, notice that pin 3 is missing on the board) Power up the board by connecting the AC adapter Power up the board by connecting the AC adapter Remember the ADSP-BF533 is a 16-bit processor, make sure to use VisualDSP++ for 16-bit processors Remember the ADSP-BF533 is a 16-bit processor, make sure to use VisualDSP++ for 16-bit processors
3
Start VisualDSP++ Configurator
4
VisualDSP++ Configurator Window
5
Select ADSP-BF533 EZ-KIT Lite via Summit (for ENCM 415 Labs) and press Copy...
6
Leave settings at default, press OK (base address should default to 0x7830)
7
Selected platform should be on the right hand pane, press OK
8
Testing the Connection
9
Start ICETest Utility
10
Make sure Summit-ICE is selected as the Type, then press Start
11
ICETest Passed (green checkmarks for all items under status). Click Exit
12
Starting VisualDSP++ for the first time
13
Start VisualDSP++ Environment IMPORTANT NOTE: Hold Down Control (CTRL) on the keyboard
14
Select Blackfin Emulators/EZ-KITs under Debug Target, then select the platform you just created. Change the Session name if needed, then press OK
15
VisualDSP++ started. If there is an error box, check all connections and try again.
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.