1. Weather …How to Connect and Use Weather with APIC…

2. The First step is to pair the WxWorx box with your computer Note: To view instructions on how to connect a Bluetooth WxWorx receiver, see the “” PowerPoint presentation Note: To view instructions on how to connect a Bluetooth WxWorx receiver, see the “Bluetooth Set Up” PowerPoint presentation

3. Place the Weather Worx receiver antenna in a location where it has a clear view of the sky … then wait for the Weather Worx receiver to acquire satellites, and begin to receive weather data. This information is shown in the XMLink Box…

4. In APIC under the Settings Menu, click on the Weather Menu

5. Select items to display on the moving map Click here to view the XmLink

6. This is the XmLink box. This shows which information is being receiving from Xm Weather

7. Under the Tools Menu, select the Communication Settings button

8. Here set the correct Com Port the Bluetooth manager assigned your device Note: The correct Baud Rate for WxWorx is 38400

9. Radar information Satellite information Metar information After selecting the different weather components, they appear overlaid on the moving map

10. You can also display Winds Aloft at different elevations.

13. For any other questions regarding APIC see www.approach-systems.com or contact Approach at support@approach-systems.com