1. Test Stand - Concepts -- vertical/horizontal, load cell/strain gage -- location

2. Test Stand - Current Design

3. Safety - Stress Analysis and Calculations -- Structural Factor of Safety > or = 2 -- Safety Redundancies

4. Test Procedure Setup test stand per instructions outlined in safety report Countdown t = 0 Apply current to igniter, start DAQ t = 0.5 turn on NOx t = 1Turn off current to igniter 1 < t < test timePure NOx t = test timeElectronically shut off NOx, turn on N2 t = test time + 3Electronically shut off N2, stop DAQ