1. Auto - Drive An Automated Driving Range

2. Team Members Mike Loiselle Jared Beland Jeremy Paradee

3. BACKGROUND A typical driving range consists of a range mat and a rubber tee. The golfer pays for a bucket of balls from an attendant at the front desk. The golfer will manually tee up each golf ball on the rubber tee and hit them.

4. Problem Statement To design and build an automated driving range that will improve the ranges’ overall productivity.

5. Problem Solution Bill acceptor to give a signal to start the program Network of piping to hold and transfer balls to lifting system. Stepper motor, lead screw linear actuator, and tee to lift up golf balls. Light / Dark Sensor to determine when ball is present on tee. Sensors to start the timer and stop the timer for the swing speed calculator. 7 segment displays to inform golfer how many balls have been hit and how fast each swing was.

6. System Overview

7. Team Auto-Drive System Flow Chart

8. Team Auto-Drive HC08 #1 Flow Chart

9. Team Auto-Drive HC08 #2 Flow Chart

10. Project Schedule

11. Acknowledgements John Murphy – HC08 Programming

12. Questions